|Dump data of packets even if they are broken or cannot be interpreted.|
|-d DEVICE, --device=DEVICE|
|Set the device the Lego tower is connected to. If this option is not present, the device name is taken from the RCXTTY environment variable or the built-in default value in the given order.|
|Set the transmission speed to 4800 baud instead of 2400 baud.|
|Show this summary.|
|-m N, --mask N|
|Set the host:port bit mask value used to decode LNP addressing layer messages. The default value is 0xf0 so that address 0x85 is decoded as 0x08:0x05 (host 8, port 5).|
|Turn on legOS compatibility mode. BrickOS/legOS Versions before 0.2.5.2 used a slightly different serial protocol (no parity bit instead of odd parity).|
|-r, --raw (implies --all)|
Dump all received data, including keepalive bytes and broken packets. However,
bytes that form a valid package are still displayd as a block.
This program is based on the lnphost library and should work on any posix compilant operating system. USB support is currently only available under Linux.
Stephan H�hrmann <firstname.lastname@example.org>
Copyright (C) 2004 Stephan H�hrmann.
lnpdump is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
lnpdump is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with lnpdump; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
This is free software, released under the terms of the GNU General Public License.
|Stephan H�hrmann||LNPDUMP (1)||November 2004|