|o||There are two versions of the volume, one at the source site and one at the destination site. (If this happens, retain the version identified by the VLDB and use the vos zap command to remove the other version.)|
|o||The backup version of the volume is stranded at the old site. (If this happens, use the vos zap command to remove it.)|
|o||The volume is off-line. (If this happens, run the bos salvage command to bring it back on line.)|
SIGINT handler: vos move operation in progress
WARNING: may leave AFS storage and metadata in indeterminate state
enter second control-c to exit
To confirm termination of the operation, press Ctrl-C a second time; press any other key to continue the operation.
Currently, the maximum quota for a volume is 2 terabytes (2^41 bytes). Note that this only affects the volumes quota; a volume may grow much larger if the volume quota is disabled. However, volumes over 2 terabytes in size may be impractical to move, and may have their size incorrectly reported by some tools, such as fs_listquota(1).
-id <volume name or ID> Specifies either the complete name or volume ID number of a read/write volume. -fromserver <server name> Identifies the file server machine where the volume currently resides. Provide the machines IP address or its host name (either fully qualified or using an unambiguous abbreviation). For details, see vos(1). -frompartition <partition name> Names the partition where the volume currently resides. Provide the full partition name (for, example, /vicepa) or one of the abbreviated forms described in vos(1). -toserver <server name> Identifies the file server machine to which to move the volume. Provide the machines IP address or its host name (either fully qualified or using an unambiguous abbreviation). For details, see vos(1). -topartition <partition name> Names the partition to which to move the volume. Provide the full partition name (for, example, /vicepa) or one of the abbreviated forms described in vos(1). -live Avoids making a temporary copy of the volume during the move. This is useful if the partition is full, but the administrator needs to move volumes to a another partition or server to free up disk space. The caveat is that the volume is locked during the entire operation instead of the short time that is needed to make the temporary clone. -cell <cell name> Names the cell in which to run the command. Do not combine this argument with the -localauth flag. For more details, see vos(1). -noauth Assigns the unprivileged identity anonymous to the issuer. Do not combine this flag with the -localauth flag. For more details, see vos(1). -localauth Constructs a server ticket using a key from the local /usr/local/etc/openafs/server/KeyFile file. The vos command interpreter presents it to the Volume Server and Volume Location Server during mutual authentication. Do not combine this flag with the -cell argument or -noauth flag. For more details, see vos(1). -verbose Produces on the standard output stream a detailed trace of the commands execution. If this argument is omitted, only warnings and error messages appear. -encrypt Encrypts the command so that the operations results are not transmitted across the network in clear text. This option is available in OpenAFS versions 1.4.11 or later and 1.5.60 or later. -noresolve Shows all servers as IP addresses instead of the DNS name. This is very useful when the server address is registered as 127.0.0.1 or when dealing with multi-homed servers. This option is available in OpenAFS versions 1.4.8 or later and 1.5.35 or later. -help Prints the online help for this command. All other valid options are ignored.
The following example moves the volume user.smith from the /vicepb partition on the file server machine fs3.abc.com to the /vicepg partition on the file server machine fs7.abc.com.
% vos move -id user.smith -fromserver fs3.abc.com -frompartition b \ -toserver fs7.abc.com -topartition g
The issuer must be listed in the /usr/local/etc/openafs/server/UserList file on the machines specified with the -toserver and -fromserver arguments and on each database server machine. If the -localauth flag is included, the issuer must instead be logged on to a server machine as the local superuser root.
vos(1), vos_addsite(1), vos_backup(1), vos_copy(1), vos_release(1), vos_listvol(1), vos_remove(1)
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0. It was converted from HTML to POD by software written by Chas Williams and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.