|yaz-client [-a apdulog] [-b berdump] [-c cclfile] [-d dump] [-f cmdfile] [-k size] [-m marclog] [-p proxy-addr] [-q cqlfile] [-t dispcharset] [-u auth] [-v loglevel] [-V] [-x] [server-addr]|
yaz-client is a [blue]Z39.50/[blue]SRU client (origin) with a simple command line interface that allows you to test behavior and performance of Z39.50 targets and SRU servers.
From YAZ version 4.1.0 yaz-client may also operate as a [blue]Solr Web Service client.
If the server-addr is specified, the client creates a connection to the Z39.50/SRU target at the address given.
When yaz-client is started it tries to read commands from one of the following files:
o Command file if it is given by option -f.
o .yazclientrc in current working directory.
o .yazclientrc in the users home directory. The value of the HOME is used to determine the home directory. Normally, HOME is only set on POSIX systems such as Linux, FreeBSD, Solaris.
-a filenameIf specified, logging of protocol packages will be appended to the file given. If filename is specified as -, the output is written to stdout.
-b filenameIf specified, YAZ will dump BER data in readable notation to the file specified. If filename is specified as - the output is written to stdout.
-c filenameIf specified, CCL configuration will be read from the file given.
-d dumpIf specified, YAZ will dump BER data for all PDUs sent and received to individual files, named dump.DDD.raw, where DDD is 001, 002, 003, ..
-f cmdfileReads commands from cmdfile. When this option is used, YAZ client does not read .yazclientrc from current directory or home directory.
-k sizeSets preferred messages and maximum record size for Initialize Request in kilobytes. Default value is 65536 (64 MB).
-m filenameIf specified, retrieved records will be appended to the file given.
-p proxy-addrIf specified, the client will use the proxy at the address given. YAZ client will connect to a proxy on the address and port given. The actual target will be specified as part of the InitRequest to inform the proxy about the actual target.
-q filenameIf specified, CQL configuration will be read from the file given.
-t displaycharsetIf displaycharset is given, it specifies name of the character set of the output (on the terminal on which YAZ client is running).
-u authIf specified, the auth string will be used for authentication.
-v levelSets the LOG level to level. Level is a sequence of tokens separated by comma. Each token is a integer or a named LOG item - one of fatal, debug, warn, log, malloc, all, none.
-VPrints YAZ version.
-xMakes the YAZ client print hex dumps of packages sent and received on standard output.
The YAZ client accepts the following commands.
open zurlOpens a connection to a server. The syntax for zurl is the same as described above for connecting from the command line.
quitQuits YAZ client
find querySends a Search Request using the query given. By default the query is assumed to be PQF. See command querytype for more information.
delete setnameDeletes result set with name setname on the server.
base base1 base2 ...Sets the name(s) of the database(s) to search. One or more databases may be specified, separated by blanks. This command overrides the database given in zurl.
show [start[+number]]Fetches records by sending a Present Request from the start position given by start and a number of records given by number. If start is not given, then the client will fetch from the position of the last retrieved record plus 1. If number is not given, then one record will be fetched at a time.
scan termScans database index for a term. The syntax resembles the syntax for find. If you want to scan for the word water you could write
but if you want to scan only in, say the title field, you would write
scan @attr 1=4 water
setscan set termScans database index for a term within a result set. This is similar to the scan command but has a result set as its first argument.
scanpos posSets preferred position for scan. This value is used in the next scan. By default, position is 1.
scansize sizeSets number of entries to be returned by scan. Default number of entries is 20.
scanstep stepSet step-size for scan. This value is used in the next scan sent to the target. By default step-size is 0.
sort sortspecsSorts a result set. The sort command takes a sequence of space-separated sort specifications, with each sort specification consisting of two space-separated words (so that the whole specification list is made up of an even number of words). The first word of each specification holds a field (sort criterion) and the second holds flags. If the sort criterion includes = it is assumed that the SortKey is of type sortAttributes using Bib-1: in this case the integer before = is the attribute type and the integer following = is the attribute value. If no = character is in the criterion, it is treated as a sortfield of type InternationalString. The flags word of each sort specification must consist of s for case sensitive or i for case insensitive, and < for ascending order or > for descending order.
sort+Same as sort but stores the sorted result set in a new result set.
authentication openauthSets up an authentication string if a server requires authentication (v2 OpenStyle). The authentication string is first sent to the server when the open command is issued and the Z39.50 Initialize Request is sent, so this command must be used before open in order to be effective. A common convention for the authopen string is that the username - and password is separated by a slash, e.g. myusername/mysecret.
sru method versionSelects Web Service method and version. Must be one of post, get, soap (default) or solr. Version should be either 1.1, 1.2 or 2.0 for SRU. Other versions are allowed - for testing purposes (version negotiation with SRU server). The version is currently not used for Solr Web Services
list_allThis command displays status and values for many settings.
lslb nSets the limit for when no records should be returned together with the search result. See the [blue]Z39.50 standard on set bounds for more details.
ssub nSets the limit for when all records should be returned with the search result. See the [blue]Z39.50 standard on set bounds for more details.
mspn nSets the number of records that should be returned if the number of records in the result set is between the values of lslb and ssub. See the [blue]Z39.50 standard on set bounds for more details.
statusDisplays the values of lslb, ssub and mspn.
setnameSwitches named result sets on and off. Default is on.
cancelSends a Trigger Resource Control Request to the target.
format oidSets the preferred transfer syntax for retrieved records. yaz-client supports all the record syntaxes that currently are registered. See [blue]Z39.50 Record Syntax Identifiers for more details. Commonly used records syntaxes include usmarc, sutrs and xml.
elements eSets the element set name for the records. Many targets support element sets B (for brief) and F (for full).
closeSends a Z39.50 Close APDU and closes connection with the peer
querytype typeSets the query type as used by command find. The following is supported: prefix for Prefix Query Notation (Type-1 Query); ccl for CCL search (Type-2 Query), cql for CQL (Type-104 search with CQL OID), ccl2rpn for CCL to RPN conversion (Type-1 Query), cql2rpn for CQL to RPN conversion (Type-1 Query).
attributeset setSets attribute set OID for prefix queries (RPN, Type-1).
refid idSets reference ID for Z39.50 Request(s).
itemorder type noSends an Item Order Request using the ILL External. type is either 1 or 2 which corresponds to ILL-Profile 1 and 2 respectively. The no is the Result Set position of the record to be ordered.
update action recid docSends Item Update Request. The action argument must be the action type: one of insert, replace, delete and update. The second argument, recid, is the record identifier (any string). Third argument which is optional is the record document for the request. If doc is preceded with "<", then the following characters are treated as a filename with the records to be updated. Otherwise doc is treated as a document itself. The doc may also be quoted in double quotes. If doc is omitted, the last received record (as part of present response or piggybacked search response) is used for the update.
source filenameExecutes list of commands from file filename, just like source on most UNIX shells. A single dot (.) can be used as an alternative.
! argsExecutes command args in subshell using the system call.
push_command commandThe push_command takes another command as its argument. That command is then added to the history information (so you can retrieve it later). The command itself is not executed. This command only works if you have GNU readline/history enabled.
set_apdufile filenameSets that APDU should be logged to file filename. Another way to achieve APDU log is by using command-line option -a.
set_auto_reconnect flagSpecifies whether YAZ client automatically reconnects if the target closes connection (Z39.50 only).
flag must be either on or off.
set_auto_wait flagSpecifies whether YAZ client should wait for response protocol packages after a request. By default YAZ client waits (on) for response packages immediately after a command (find, show) has been issued. If off is used, YAZ client does not attempt to receive packages automatically. These will have to be manually received when command wait_response is used.
flag must be either on or off.
set_marcdump filenameSpecifies that all retrieved records should be appended to file filename. This command does the thing as option -m.
schema schemaidSpecifies schema for retrieval. Schema may be specified as an OID for Z39.50. For SRU, schema is a simple string URI.
charset negotiationcharset [displaycharset] [[marccharset]]Specifies character set (encoding) for Z39.50 negotiation / SRU encoding and/or character set for output (terminal).
negotiationcharset is the name of the character set to be negotiated by the server. The special name - for negotiationcharset specifies no character set to be negotiated.
If displaycharset is given, it specifies name of the character set of the output (on the terminal on which YAZ client is running). To disable conversion of characters to the output encoding, the special name - (dash) can be used. If the special name auto is given, YAZ client will convert strings to the encoding of the terminal as returned by nl_langinfo call.
If marccharset is given, it specifies name of the character set of retrieved MARC records from server. See also marccharset command.
Since character set negotiation takes effect in the Z39.50 Initialize Request you should issue this command before command open is used.
MARC records are not covered by Z39.50 character set negotiation, so thats why there is a separate character that must be known in order to do meaningful conversion(s).
negcharset charsetSpecifies character set for negotiation (Z39.50). The argument is the same as second argument for command charset.
displaycharset charsetSpecifies character set for output (display). The argument is the same as second argument for command charset.
marccharset charsetSpecifies character set for retrieved MARC records so that YAZ client can display them in a character suitable for your display. See charset command. If auto is given, YAZ will assume that MARC21/USMARC is using MARC8/UTF8 and ISO-8859-1 for all other MARC variants. The charset argument is the same as third argument for command charset.
querycharset charsetSpecifies character set for query terms for Z39.50 RPN queries and Z39.50 Scan Requests (termListAndStartPoint). This is a pure client-side conversion which converts from displayCharset to queryCharset.
set_cclfile filenameSpecifies that CCL fields should be read from file file filename. This command does the thing as option -c.
set_cqlfile filenameSpecifies that CQL fields should be read from file file filename. This command does the thing as option -q.
register_oid name class OIDThis command allows you to register your own object identifier - so that instead of entering a long dot-notation you can use a short name instead. The name is your name for the OID, class is the class, and OID is the raw OID in dot notation. Class is one of: appctx, absyn, attet, transyn, diagset, recsyn, resform, accform, extserv, userinfo, elemspec, varset, schema, tagset, general. If youre in doubt use the general class.
register_tab command stringThis command registers a TAB completion string for the command given.
sleep secondsThis command makes YAZ client sleep (be idle) for the number of seconds given.
wait_response [ number]This command makes YAZ client wait for a number of response packages from target. If number is omitted, 1 is assumed.
This command is rarely used and is only useful if command set_auto_wait is set to off.
xmles OID docSends XML Extended Services request using the OID and doc given.
zversion verThis command sets Z39.50 version for negotiation. Should be used before open. By default 3 (version 3) is used.
options op1 op2..This command sets Z39.50 options for negotiation. Should be used before open.
The following options are supported: search, present, delSet, resourceReport, triggerResourceCtrl, resourceCtrl, accessCtrl, scan, sort, extendedServices, level_1Segmentation, level_2Segmentation, concurrentOperations, namedResultSets, encapsulation, resultCount, negotiationModel, duplicationDetection, queryType104, pQESCorrection, stringSchema.
The simplest example of a Prefix Query would be something like
f "donald knuth"
In those queries, no attributes were specified. This leaves it up to the server what fields to search but most servers will search in all fields. Some servers do not support this feature though, and require that some attributes are defined. To add one attribute you could do:
f @attr 1=4 computer
where we search in the title field, since the use(1) is title(4). If we want to search in the author field and in the title field, and in the title field using right truncation it could look something like this:
f @and @attr 1=1003 knuth @attr 1=4 @attr 5=1 computer
Finally using a mix of Bib-1 and GILS attributes could look something like this:
f @attrset Bib-1 @and @attr GILS 1=2008 Washington @attr 1=21 weather
1. Z39.50 http://www.loc.gov/z3950/agency/ 2. SRU http://www.loc.gov/standards/sru/ 3. Solr http://lucene.apache.org/solr/ 4. Z39.50 standard on set bounds http://www.loc.gov/z3950/agency/markup/04.html#184.108.40.206.6 5. Z39.50 Record Syntax Identifiers http://www.loc.gov/z3950/agency/defns/oids.html#5
|YAZ 5.15.1||YAZ-CLIENT (1)||11/12/2015|