NAME

SYNOPSIS

    &charge=mcve

        or

    [charge mode=mcve param1=value1 param2=value2]

        or

    mcve($mode, $opt);

PREREQUISITES

    MCVE.pm

The MCVE libraries are available free at http://www.mcve.com/

DESCRIPTION

The Vend::Payment::MCVE module implements the mcve() routine for use with Interchange. It is compatible on a call level with the other Interchange payment modules -- in theory (and even usually in practice) you could switch from CyberCash to MCVE with a few configuration file changes.

To enable this module, place this directive in "interchange.cfg":

    Require module Vend::Payment::MCVE

This must be in interchange.cfg or a file included from it.

Make sure CreditCardAuto is off (default in Interchange demos).

The mode can be named anything, but the "gateway" parameter must be set to "mcve". To make it the default payment gateway for all credit card transactions in a specific catalog, you can set in "catalog.cfg":

    Variable   MV_PAYMENT_MODE  mcve

It uses several of the standard settings from Interchange payment. Any time we speak of a setting, it is obtained either first from the tag/call options, then from an Interchange order Route named for the mode, then finally a default global payment variable, For example, the "id" parameter would be specified by:

    [charge mode=mcve name=mcve_configname]

or

    Route mcve name mcve_configname

or

    Variable MV_PAYMENT_NAME      mcve_configname

The active settings are:

    Variable   MV_PAYMENT_MODE mcve
    Variable   MV_PAYMENT_NAME mcve_username
    Variable   MV_PAYMENT_PASSWD mcve_password
    Variable   MV_PAYMENT_HOST sv1.carlc.com
    Variable   MV_PAYMENT_PORT 8333
    Variable   MV_PAYMENT_COUNTER etc/mcve_id.counter
    Variable   MV_PAYMENT_COUNTER_START 100
    Variable   MV_PAYMENT_SALE_ON_AUTH 1
    Variable   MV_PAYMENT_NO_SALE_BAD_AVS 0
    Variable   MV_PAYMENT_NO_SALE_BAD_CVV2 0
    Variable   MV_PAYMENT_SUCCESS_ON_ANY 0

name

Your MCVE configuration username, set up when MCVE was configured/installed on the machine. Global parameter is MV_PAYMENT_NAME.

no_sale_bad_avs

Normally Interchange charge modules do an authorization, and if successful, do a sale. This module is configurable for a different models, where transactions are not automatically saled.

sale_on_auth

The storekeeper may not wish to sale a transaction if the AVS is bad.

success_on_any

Alternatively the storekeeper may wish to cause any transaction to appear to be a successful sale. The storekeeper would have to contact buyers with bad credit card information and manually redo the sale. The motivation is to make sure no one attempts a sale and gives up for any reason. This mode of operation, set with MV_PAYMENT_SUCCESS_ON_ANY is not commonly used.

transaction

The type of transaction to be run. Valid values are:

    Interchange mode    MCVE mode
    ----------------    -----------------
    auth                auth
    sale                sale
    

Not supported yet:

    return              return
    reverse             reverse
    void                void
    

counter, counter_start

Currently this is not being used, and Interchange is generating id's.

    Route   mcve  counter        etc/mcve_id.counter
    Route   mcve  counter_start  100
    

    Require module Vend::Payment::MCVE

    [calc]
        $Tag->uneval( { ref => $Session->{payment_result} );
    [/calc]

BUGS

AUTHORS

CREDITS