GSP
Quick Navigator

Search Site

Unix VPS
A - Starter
B - Basic
C - Preferred
D - Commercial
MPS - Dedicated
Previous VPSs
* Sign Up! *

Support
Contact Us
Online Help
Handbooks
Domain Status
Man Pages

FAQ
Virtual Servers
Pricing
Billing
Technical

Network
Facilities
Connectivity
Topology Map

Miscellaneous
Server Agreement
Year 2038
Credits
 

USA Flag

 

 

Man Pages


Manual Reference Pages  -  CLAMD.CONF (5)

NAME

clamd.conf - Configuration file for Clam AntiVirus Daemon

CONTENTS

DESCRIPTION

clamd.conf configures the Clam AntiVirus daemon, clamd(8).

FILE FORMAT

The file consists of comments and options with arguments. Each line which starts with a hash (#) symbol is ignored by the parser. Options and arguments are case sensitive and of the form Option Argument. The arguments are of the following types:
BOOL Boolean value (yes/no or true/false or 1/0).
STRING String without blank characters.
SIZE Size in bytes. You can use ’M’ or ’m’ modifiers for megabytes and ’K’ or ’k’ for kilobytes. To specify the size in bytes just don’t use modifiers.
NUMBER Unsigned integer.

DIRECTIVES

When some option is not used (commented out or not included in the configuration file at all) clamd takes a default action.
Example
  If this option is set clamd will not run.
LogFile STRING
  Save all reports to a log file.
Default: disabled
LogFileUnlock BOOL
  By default the log file is locked for writing and only a single daemon process can write to it. This option disables the lock.
Default: no
LogFileMaxSize SIZE
  Maximum size of the log file.
Value of 0 disables the limit.
Default: 1048576
LogTime BOOL
  Log time for each message.
Default: no
LogClean BOOL
  Log all clean files.
Useful in debugging but drastically increases the log size.
Default: no
LogSyslog BOOL
  Use the system logger (can work together with LogFile).
Default: no
LogFacility STRING
  Type of syslog messages
Please refer to ’man syslog’ for facility names.
Default: LOG_LOCAL6
LogVerbose BOOL
  Enable verbose logging.
Default: no
LogRotate BOOL
  Rotate log file. Requires LogFileMaxSize option set prior to this option.
Default: no
ExtendedDetectionInfo BOOL
  Log additional information about the infected file, such as its size and hash, together with the virus name.
Default: no
PidFile STRING
  Save the process identifier of a listening daemon (main thread) to a specified file.
Default: disabled
TemporaryDirectory STRING
  This option allows you to change the default temporary directory.
Default: system specific (usually /tmp or /var/tmp).
DatabaseDirectory STRING
  This option allows you to change the default database directory. If you enable it, please make sure it points to the same directory in both clamd and freshclam.
Default: defined at configuration (/usr/local/share/clamav)
OfficialDatabaseOnly BOOL
  Only load the official signatures published by the ClamAV project.
Default: no
LocalSocket STRING
  Path to a local (Unix) socket the daemon will listen on.
Default: disabled
LocalSocketGroup STRING
  Sets the group ownership on the unix socket.
Default: the primary group of the user running clamd
LocalSocketMode STRING
  Sets the permissions on the unix socket to the specified mode.
Default: socket is world readable and writable
FixStaleSocket BOOL
  Remove stale socket after unclean shutdown.
Default: yes
TCPSocket NUMBER
  TCP port number the daemon will listen on.
Default: disabled
TCPAddr STRING
  By default clamd binds to INADDR_ANY.
This option allows you to restrict the TCP address and provide some degree of protection from the outside world. This option can be specified multiple times in order to listen on multiple IPs. IPv6 is now supported.
Default: disabled
MaxConnectionQueueLength NUMBER
  Maximum length the queue of pending connections may grow to.
Default: 200
StreamMaxLength SIZE
  Close the STREAM session when the data size limit is exceeded.
The value should match your MTA’s limit for the maximum attachment size.
Default: 25M
StreamMinPort NUMBER
  The STREAM command uses an FTP-like protocol.
This option sets the lower boundary for the port range.
Default: 1024
StreamMaxPort NUMBER
  This option sets the upper boundary for the port range.
Default: 2048
MaxThreads NUMBER
  Maximum number of threads running at the same time.
Default: 10
ReadTimeout NUMBER
  This option specifies the time (in seconds) after which clamd should timeout if a client doesn’t provide any data.
Default: 120
CommandReadTimeout NUMBER
  This option specifies the time (in seconds) after which clamd should timeout if a client doesn’t provide any initial command after connecting. Note: the timeout for subsequents commands, and/or data chunks is specified by ReadTimeout.
Default: 5
SendBufTimeout NUMBER
  This option specifies how long to wait (in milliseconds) if the send buffer is full. Keep this value low to prevent clamd hanging.
Default: 500
MaxQueue NUMBER
  Maximum number of queued items (including those being processed by MaxThreads threads). It is recommended to have this value at least twice MaxThreads if possible.
WARNING: you shouldn’t increase this too much to avoid running out of file descriptors, the following condition should hold: MaxThreads*MaxRecursion + MaxQueue - MaxThreads + 6 < RLIMIT_NOFILE. RLIMIT_NOFILE is the maximum number of open file descriptors (usually 1024), set by ulimit -n.
Default: 100
IdleTimeout NUMBER
  This option specifies how long (in seconds) the process should wait for a new job.
Default: 30
ExcludePath REGEX
  Don’t scan files and directories matching REGEX. This directive can be used multiple times.
Default: disabled
MaxDirectoryRecursion NUMBER
  Maximum depth directories are scanned at.
Default: 15
FollowDirectorySymlinks BOOL
  Follow directory symlinks.
Default: no
CrossFilesystems BOOL
  Scan files and directories on other filesystems.
Default: yes
FollowFileSymlinks BOOL
  Follow regular file symlinks.
Default: no
SelfCheck NUMBER
  This option specifies the time intervals (in seconds) in which clamd should perform a database check.
Default: 600
VirusEvent COMMAND
  Execute a command when a virus is found. In the command string %v will be replaced with the virus name. Additionally, two environment variables will be defined: $CLAM_VIRUSEVENT_FILENAME and $CLAM_VIRUSEVENT_VIRUSNAME.
Default: disabled
ExitOnOOM BOOL
  Stop daemon when libclamav reports out of memory condition.
Default: no
AllowAllMatchScan BOOL
  Permit use of the ALLMATCHSCAN command.
Default: yes
Foreground BOOL
  Don’t fork into background.
Default: no
Debug BOOL
  Enable debug messages from libclamav.
Default: no
LeaveTemporaryFiles BOOL
  Do not remove temporary files (for debugging purpose).
Default: no
User STRING
  Run the daemon as a specified user (the process must be started by root).
Default: disabled
AllowSupplementaryGroups BOOL
  Initialize a supplementary group access (the process must be started by root).
Default: no
Bytecode BOOL
  With this option enabled ClamAV will load bytecode from the database. It is highly recommended you keep this option turned on, otherwise you may miss detections for many new viruses.
Default: yes
BytecodeSecurity STRING
  Set bytecode security level.
Possible values:
  TrustSigned - trust bytecode loaded from signed .c[lv]d files and insert runtime safety checks for bytecode loaded from other sources,
Paranoid - don’t trust any bytecode, insert runtime checks for all.
Recommended: TrustSigned, because bytecode in .cvd files already has these checks.
Default: TrustSigned
BytecodeTimeout NUMBER
  Set bytecode timeout in milliseconds.
Default: 5000
BytecodeUnsigned BOOL
  Allow loading bytecode from outside digitally signed .c[lv]d files.
Default: no
BytecodeMode STRING
  Set bytecode execution mode.
Possible values:
  Auto - automatically choose JIT if possible, fallback to interpreter
ForceJIT - always choose JIT, fail if not possible
ForceInterpreter - always choose interpreter
Test - run with both JIT and interpreter and compare results. Make all failures fatal.
Default: Auto
DetectPUA BOOL
  Detect Possibly Unwanted Applications.
Default: No
ExcludePUA CATEGORY
  Exclude a specific PUA category. This directive can be used multiple times. See http://www.clamav.net/doc/pua.html for the complete list of PUA categories.
Default: disabled
IncludePUA CATEGORY
  Only include a specific PUA category. This directive can be used multiple times. See http://www.clamav.net/doc/pua.html for the complete list of PUA categories.
Default: disabled
AlgorithmicDetection BOOL
  In some cases (eg. complex malware, exploits in graphic files, and others), ClamAV uses special algorithms to provide accurate detection. This option controls the algorithmic detection.
Default: yes
ScanPE BOOL
  PE stands for Portable Executable - it’s an executable file format used in all 32 and 64-bit versions of Windows operating systems. This option allows ClamAV to perform a deeper analysis of executable files and it’s also required for decompression of popular executable packers such as UPX.
If you turn off this option, the original files will still be scanned, but without additional processing.
Default: yes
ScanELF BOOL
  Executable and Linking Format is a standard format for UN*X executables. This option allows you to control the scanning of ELF files.
If you turn off this option, the original files will still be scanned, but without additional processing.
Default: yes
DetectBrokenExecutables BOOL
  With this option clamd will try to detect broken executables (both PE and ELF) and mark them as Broken.Executable.
Default: no
ScanMail BOOL
  Enable scanning of mail files.
If you turn off this option, the original files will still be scanned, but without parsing individual messages/attachments.
Default: yes
ScanPartialMessages BOOL
  Scan RFC1341 messages split over many emails. You will need to periodically clean up $TemporaryDirectory/clamav-partial directory. WARNING: This option may open your system to a DoS attack. Never use it on loaded servers.
Default: no
PhishingSignatures BOOL
  With this option enabled ClamAV will try to detect phishing attempts by using signatures.
Default: yes
PhishingScanURLs BOOL
  Scan URLs found in mails for phishing attempts using heuristics. This will classify "Possibly Unwanted" phishing emails as Phishing.Heuristics.Email.*
Default: yes
PhishingAlwaysBlockCloak BOOL
  Always block cloaked URLs, even if URL isn’t in database. This can lead to false positives.
Default: no
PhishingAlwaysBlockSSLMismatch BOOL
  Always block SSL mismatches in URLs, even if the URL isn’t in the database. This can lead to false positives.
Default: no
PartitionIntersection BOOL
  Detect partition intersections in raw disk images using heuristics.
Default: no
HeuristicScanPrecedence BOOL
  Allow heuristic match to take precedence. When enabled, if a heuristic scan (such as phishingScan) detects a possible virus/phishing it will stop scanning immediately. Recommended, saves CPU scan-time. When disabled, virus/phishing detected by heuristic scans will be reported only at the end of a scan. If an archive contains both a heuristically detected virus/phishing, and a real malware, the real malware will be reported. Keep this disabled if you intend to handle "*.Heuristics.*" viruses differently from "real" malware. If a non-heuristically-detected virus (signature-based) is found first, the scan is interrupted immediately, regardless of this config option.
Default: no
StructuredDataDetection BOOL
  Enable the DLP module.
Default: no
StructuredMinCreditCardCount NUMBER
  This option sets the lowest number of Credit Card numbers found in a file to generate a detect.
Default: 3
StructuredMinSSNCount NUMBER
  This option sets the lowest number of Social Security Numbers found in a file to generate a detect.
Default: 3
StructuredSSNFormatNormal BOOL
  With this option enabled the DLP module will search for valid SSNs formatted as xxx-yy-zzzz.
Default: Yes
StructuredSSNFormatStripped BOOL
  With this option enabled the DLP module will search for valid SSNs formatted as xxxyyzzzz.
Default: No
ScanHTML BOOL
  Perform HTML/JavaScript/ScriptEncoder normalisation and decryption.
If you turn off this option, the original files will still be scanned, but without additional processing.
Default: yes
ScanOLE2 BOOL
  This option enables scanning of OLE2 files, such as Microsoft Office documents and .msi files.
If you turn off this option, the original files will still be scanned, but without additional processing.
Default: yes
OLE2BlockMacros BOOL
  With this option enabled OLE2 files with VBA macros, which were not detected by signatures will be marked as "Heuristics.OLE2.ContainsMacros".
Default: no
ScanPDF BOOL
  This option enables scanning within PDF files.
If you turn off this option, the original files will still be scanned, but without additional processing.
Default: yes
ScanSWF BOOL
  This option enables scanning within SWF files.
If you turn off this option, the original files will still be scanned, but without decoding and additional processing.
Default: yes
ScanXMLDOCS BOOL
  This option enables scanning xml-based document files supported by libclamav.
If you turn off this option, the original files will still be scanned, but without additional processing.
Default: yes
ScanHWP3 BOOL
  This option enables scanning HWP3 files.
If you turn off this option, the original files will still be scanned, but without additional processing.
Default: yes
ScanArchive BOOL
  Scan within archives and compressed files.
If you turn off this option, the original files will still be scanned, but without unpacking and additional processing.
Default: yes
ArchiveBlockEncrypted BOOL
  Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
Default: no
ForceToDisk
  This option causes memory or nested map scans to dump the content to disk.
If you turn on this option, more data is written to disk and is available when the leave-temps option is enabled at the cost of more disk writes.
Default: no
Default: no
MaxScanSize SIZE
  Sets the maximum amount of data to be scanned for each input file. Archives and other containers are recursively extracted and scanned up to this value. The size of an archive plus the sum of the sizes of all files within archive count toward the scan size. For example, a 1M uncompressed archive containing a single 1M inner file counts as 2M toward the max scan size. Warning: disabling this limit or setting it too high may result in severe damage to the system.
Default: 100M
MaxFileSize SIZE
  Files larger than this limit won’t be scanned. Affects the input file itself as well as files contained inside it (when the input file is an archive, a document or some other kind of container). Warning: disabling this limit or setting it too high may result in severe damage to the system.
Default: 25M
MaxRecursion NUMBER
  Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR file, all files within it will also be scanned. This options specifies how deeply the process should be continued. Warning: setting this limit too high may result in severe damage to the system.
Default: 16
MaxFiles NUMBER
  Number of files to be scanned within an archive, a document, or any other kind of container. Warning: disabling this limit or setting it too high may result in severe damage to the system.
Default: 10000
MaxEmbeddedPE SIZE
  This option sets the maximum size of a file to check for embedded PE.
Files larger than this value will skip the additional analysis step.
Negative values are not allowed.
Default: 10M
MaxHTMLNormalize SIZE
  This option sets the maximum size of a HTML file to normalize.
HTML files larger than this value will not be normalized or scanned.
Negative values are not allowed.
Default: 10M
MaxHTMLNoTags SIZE
  This option sets the maximum size of a normalized HTML file to scan.
HTML files larger than this value after normalization will not be scanned.
Negative values are not allowed.
Default: 2M
MaxScriptNormalize SIZE
  This option sets the maximum size of a script file to normalize.
Script content larger than this value will not be normalized or scanned.
Negative values are not allowed.
Default: 5M
MaxZipTypeRcg SIZE
  This option sets the maximum size of a ZIP file to reanalyze type recognition.
ZIP files larger than this value will skip the step to potentially reanalyze as PE.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage or impact performance.
Default: 1M
MaxPartitions SIZE
  This option sets the maximum number of partitions of a raw disk image to be scanned.
Raw disk images with more partitions than this value will have up to the value partitions scanned.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage or impact performance.
Default: 50
MaxIconsPE SIZE
  This option sets the maximum number of icons within a PE to be scanned.
PE files with more icons than this value will have up to the value number icons scanned.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage or impact performance.
Default: 100
MaxRecHWP3 NUMBER
  This option sets the maximum recursive calls to HWP3 parsing function.
HWP3 files using more than this limit will be terminated and alert the user.
Scans will be unable to scan any HWP3 attachments if the recursive limit is reached.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage or impact performance.
Default: 16
PCREMatchLimit NUMBER
  This option sets the maximum calls to the PCRE match function during an instance of regex matching.
Instances using more than this limit will be terminated and alert the user but the scan will continue.
For more information on match_limit, see the PCRE documentation.
Negative values are not allowed.
WARNING: setting this limit too high may severely impact performance.
Default: 10000
PCRERecMatchLimit NUMBER
  This option sets the maximum recursive calls to the PCRE match function during an instance of regex matching.
Instances using more than this limit will be terminated and alert the user but the scan will continue.
For more information on match_limit_recursion, see the PCRE documentation.
Negative values are not allowed and values > PCREMatchLimit are superfluous.
WARNING: setting this limit too high may severely impact performance.
Default: 5000
PCREMaxFileSize SIZE
  This option sets the maximum filesize for which PCRE subsigs will be executed.
Files exceeding this limit will not have PCRE subsigs executed unless a subsig is encompassed to a smaller buffer.
Negative values are not allowed.
Setting this value to zero disables the limit.
WARNING: setting this limit too high or disabling it may severely impact performance.
Default: 25M
ScanOnAccess BOOL
  This option enables on-access scanning (Linux only)
Default: disabled
OnAccessIncludePath STRING
  This option specifies a directory (including all files and directories inside it), which should be scanned on access. This option can be used multiple times.
Default: disabled
OnAccessExcludePath STRING
  This option allows excluding directories from on-access scanning. It can be used multiple times.
Default: disabled
OnAccessExcludeUID NUMBER
  With this option you can whitelist specific UIDs. Processes with these UIDs will be able to access all files.
This option can be used multiple times (one per line).
Default: disabled
OnAccessMaxFileSize SIZE
  Files larger than this value will not be scanned in on access.
Default: 5M
OnAccessMountPath STRING
  Specifies a mount point (including all files and directories under it), which should be scanned on access. This option can be used multiple times.
Default: disabled
OnAccessDisableDDD BOOL
  Disables the dynamic directory determination system which allows for recursively watching include paths.
Default: no
OnAccessPrevention BOOL
  Enables fanotify blocking when malicious files are found.
Default: disabled
DisableCertCheck BOOL
  Disable authenticode certificate chain verification in PE files.
Default: no
StatsEnabled BOOL
  Enable submission of statistical data
Default: no
StatsHostID STRING
  HostID in the form of an UUID to use when submitting statistical information.
Default: auto
StatsPEDisabled BOOL
  Disable submission of PE section statistical data.
Default: no
StatsTimeout NUMBER
  Timeout in seconds to timeout communication with the stats server.
Default: 10

NOTES

All options expressing a size are limited to max 4GB. Values in excess will be resetted to the maximum.

FILES

/usr/local/etc/clamd.conf

AUTHORS

Tomasz Kojm <tkojm@clamav.net>, Kevin Lin <klin@sourcefire.com>

SEE ALSO

clamd(8), clamdscan(1), clamav-milter(8), freshclam(1), freshclam.conf(5)

Search for    or go to Top of page |  Section 5 |  Main Index


ClamAV 0.99.1 CLAMD.CONF (5) December 4, 2013

Powered by GSP Visit the GSP FreeBSD Man Page Interface.
Output converted with manServer 1.07.