|Force usage of netriks default text colors (white on black for normal text), even if the terminal has other defaults. Without this option, netrik tries to adopt to the terminals default. (Thus keeping the light background of most xterms.)|
When using the pager, this causes a page that contains extremely long
words to be rendered wider than the screen, instead of breaking the
word. Note however that side scrolling isnt implemented yet -- you
wont be able to see the end of the line when using this option... In
dump mode, this option causes usage of the default width of 80 columns
instead of what the terminal definition says. (Words are always broken
in dump mode.)
|Abort on any HTML syntax errors or warnings encountered. A short error description is printed. (This description may not be terribly useful at times...) This mode is primarily intended for HTML debugging. (Note however that netrik may oversee some errors; but most are reported.)|
|Do not abort on HTML syntax errors. Error descriptions are printed for every syntax error (or warning), but netrik tries to parse the page anyhow. Workarounds are used for some typical syntax errors (e.g. unescaped < or if some error(s) were found, a warning message is printed (according to the severity of the worst encountered bug), and the pager starts after a keypress.|
|This mode is identical to --clean-html, except that netrik doesnt pause after loading completes, if only warnings were generated but no real errors were encountered. (i.e. constructs that are discouraged in the standard, but strictly speaking are valid.)|
|This mode is identical to --valid-html, except that netrik also doesnt pause if only simple errors with known workaround were encountered, which probably wont disturb layouting. Usage should be avoided if possible. (The file syntax_error.txt or syntax_error.html in the documentation directory (see SEE ALSO below) explains why.)|
In this mode no warning is showm for any syntax errors, even if they might
cause heavily broken layouting. Dont use!
Before displaying (or dumping) the page, some intermediate layouting
stages are shown. (This output is described in the README.) Try it --
its quite interesting to watch netrik work :-) It can be also
useful to find HTML errors in a page, as it dumps the page while
(This option is not available if compiled with --disable-debug to ./configure)
|Issue a warning when encountering an unknown HTML element or attribute. This is probably only useful for debugging purposes, as there are quite a lot of (legal) HTML facilities netrik doesnt know.|
Just dump the file given as argument to the screen and quit, instead
of starting the pager. (The page is layouted correctly.)
You may want to give the --bw option also (see below), which will ensure the dump is plain text without any control sequences.
|Ignore the "http_proxy" and "HTTP_PROXY" environment variables with --builtin-http. (No effect on wget! See below.)|
|Use wget(1) to retrieve pages from a HTTP server, instead of the builtin HTTP handling code. Note that HTTP redirects in most cases cause relative links in the page to be broken when using wget. The builtin HTTP code seems to work good now; using wget shouldnt be necessary. (FTP pages however are always loaded via wget.)|
|When jumping to an anchor (following a link with a fragment identifier), the page will be scrolled (if possible) so that the anchor will stand just below the screen top. (In the second line, which is the first line in which links can be activated.) By default, the anchor is at about 1/5 of the screen height below the top.|
|Use the arrow keys to move the cursor, instead of the lynx-like navigation used by default. (This is useful for blind users, as it allows using the "flash cursor" keys found on braille displays.)|
Assume the terminal has xterm-like attribute handling. (i.e. needs a workaround
to display a bright background color.)
This setting is used automatically if the terminal type ($TERM environment variable) contains the string "xterm", so you only need to set it manually if you have some other terminal that also needs that workaround.
Note that this workaround works *only* on xterm (and maybe some other terminals), but not on linux console, so you cant just set it categorically!
|Assume the terminal doesnt need and understand the xterm workaround for bright background colors. (See above.)|
Use the color definitions from colors-dark.c (formerly
colors.alt.c). A black background will be used (even if the terminal uses
a bright background by default!), and a set of foreground colors which look
very nice on black backgound. (But would be unusable on bright background.)
This is the default now.
Use color definitions from colors-bright.c (formerly
colors.default.c). The terminals default colors will be used for
background and normal text, and an alternative color scheme suitable for bright
background will be used for other text types.
Use this if you have a terminal with bright background (like most xterms), and also want to stick to that in netrik.
Note that this can be used on a terminal with dark background as well; some colors are somewhat hard to read, however.
|Use terminals default colors even with --dark-background, instead of forcing usage of netriks default text colors (white on black for normal text). This is useful if you use the default (dark) colors and your terminal has a black background anyways -- forcing the default colors is only a waste of time in this situation.|
|--bw||Start up in b/w mode. Useful to avoid the warning about missing color capabilities if you really have a terminal not capable of switching text colors. Also useful together with --dump option.|
Undo --bw option.
The following config file:
--broken-html: Do not to stop on smaller HTML errors. (Use --valid-html or --clean-html on the command line to override that for a single netrik invocation).
--no-anchor-offset: When going to an anchor, scroll the page so that the anchor will appear at the screen top, instead of 1/5 of the screen hight below the top. (Use --anchor-offset to override.)
file:///usr/local/share/doc/netrik/index.html: When no other file name/URL is specified on the command line, open the netrik documentation overview. (If netrik was installed from a Debian or RPM package, use file:///usr/share/doc/netrik/index.html instead.)
This manual page documents the config file for netrik 1.16.1.
Netrik was created and is maintained by Olaf D. Buddenhagen AKA antrik (<email@example.com>), with major contributions from Patrice Neff, S�ren Schulze, and others. (For a full listing of all contributors see AUTHORS in the doc directory, see below.)
This man page was created by antrik.
|-->||NETRIKRC (5)||April 19th, 2004|