Manual Reference Pages - SANE-ABATON (5)
sane-abaton - SANE backend for Abaton flatbed scanners
sane-abaton library implements a SANE (Scanner Access Now Easy) backend that
provides access to Abaton flatbed scanners. At present, only the Scan
300/GS (8bit, 256 levels of gray) is fully supported, due to the
absence of programming information. The Scan 300/S (black and white)
is recognized, but support for it is untested.
If you own a Abaton scanner other than the ones listed above that
works with this backend, or if you own an Abaton scanner that does not
work with this backend, please contact
email@example.com with the model number, so that arrangements can be made to include
support for it. Have a look at http://www.sane-project.org/mailing-lists.html
concerning subscription to sane-devel.
Abaton is out of business, and these scanners are not supported by
Everex (the parent company of Abaton), nor is there any programming
information to be found. This driver is therefore based on
information obtained by running Abatons scanning desk accessory under
MacsBug and tracing the MacOS SCSI Manager calls it made during image
However, the protocol is very similar to, though not compatible with,
the one used by the Apple scanners, therefore, if this backend is ever
extended to support the other Abaton models (they also made a color
flatbed scanner), it may be possible to fill in some "missing pieces"
from the (quite detailed) Apple scanner documentation.
This backend expects device names of the form:
special is the path-name for the special device that corresponds to a SCSI
scanner. For SCSI scanners, the special device name must be a generic
SCSI device or a symlink to such a device. Under Linux, such a device
name takes a format such as
/dev/sg0, for example. See sane-scsi(5) for details.
The contents of the
abaton.conf file is a list of device names that correspond to Abaton scanners.
Empty lines and lines starting with a hash mark (#) are ignored. See
sane-scsi(5) on details of what constitutes a valid device name.
The backend configuration file (see also description of
The static library implementing this backend.
The shared library implementing this backend (present on systems that
support dynamic loading).
This environment variable specifies the list of directories that may
contain the configuration file. Under UNIX, the directories are
separated by a colon (:), under OS/2, they are separated by a
semi-colon (;). If this variable is not set, the configuration file
is searched in two default directories: first, the current working
directory (".") and then in /usr/local/etc/sane.d. If the value of the
environment variable ends with the directory separator character, then
the default directories are searched after the explicitly specified
directories. For example, setting
SANE_CONFIG_DIR to "/tmp/config:" would result in directories "tmp/config", ".", and
"/usr/local/etc/sane.d" being searched (in this order).
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend. E.g.,
a value of 255 requests all debug output to be printed. Smaller
levels reduce verbosity.
There are a few known ones, and definitely some unknown ones.
If you have found something that you think is a bug, please attempt to
recreate it with the SANE_DEBUG_ABATON environment variable set to
255, and send a report detailing the conditions surrounding the bug to
Scan area miscalculations |
For the sake of programmer efficiency, this backend handles all
measurements in millimetres, and floors (rather than rounds) values to
avoid possible damage to the scanner mechanism. Therefore, it may not
be possible to scan to the extreme right or bottom edges of the page.
Cancelling the scan |
This might not work correctly, or it might abort the frontend. The
former is more likely than the latter.
Implement non-blocking support
Finish reverse-engineering the MacOS driver
This will allow me to add support for other models with reasonable
confidence that it will work, as well as to fully exploit the
information returned by the INQUIRY command.
sane(7), sane-scsi(5), scanimage(1)
The sane-abaton backend was partially written by David Huggins-Daines,
based on the sane-apple backend by Milon Firikis.
| ||SANE-ABATON (5) ||11 Jul 2008 |
Visit the GSP FreeBSD Man Page Interface.
Output converted with manServer 1.07.