Manual Reference Pages - SANE-HP5400 (5)
sane-hp5400 - SANE backend for Hewlett-Packard 54XX scanners
sane-hp5400 library implements a SANE (Scanner Access Now Easy) backend that provides
access to the following Hewlett-Packard USB flatbed scanners:
More details can be found on the hp5400 backend homepage
This is ALPHA software. Keep your hand at the scanners plug and unplug it, if
the head bumps at the end of the scan area. See also the BUGS section.
If you own a scanner other than the ones listed above that works with this
backend, please let us know this by sending the scanners exact model name and
the USB vendor and device ids (e.g. from
sane-find-scanner or syslog) to us. Even if the scanners name is only slightly different from
the models mentioned above, please let us know.
The contents of the
hp5400.conf file is a list of usb lines containing vendor and product ids that correspond
to USB scanners. The file can also contain the names of device files that
correspond to an HP 54XX scanner. Empty lines and lines starting with a hash
mark (#) are ignored. The scanners are autodetected by
usb vendor_id product_id statements which are already included into
hp5400.conf. "vendor_id" and "product_id" are hexadecimal numbers that identify the
scanner. If autodetection does not work, add the device name of your scanner
to the configuration file, e.g.
The backend configuration file (see also description of
The static library implementing this backend.
The shared library implementing this backend (present on systems that
support dynamic loading).
This environment variable specifies the list of directories that may
contain the configuration file. Under UNIX, the directories are
separated by a colon (:), under OS/2, they are separated by a
semi-colon (;). If this variable is not set, the configuration file
is searched in two default directories: first, the current working
directory (".") and then in /usr/local/etc/sane.d. If the value of the
environment variable ends with the directory separator character, then
the default directories are searched after the explicitly specified
directories. For example, setting
SANE_CONFIG_DIR to "/tmp/config:" would result in directories "tmp/config", ".", and
"/usr/local/etc/sane.d" being searched (in this order).
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend. Higher
debug levels increase the verbosity of the output.
Martijn van Oosterhout <firstname.lastname@example.org>, Thomas Soumarmon
<email@example.com>. Manpage by Henning Meier-Geinitz
Scanning is only tested with Linux/ix86/gcc. Be careful when testing on other
operating systems and especially on big-endian platforms. The scanner may get
| ||SANE-HP5400 (5) ||13 Jul 2008 |
Visit the GSP FreeBSD Man Page Interface.
Output converted with manServer 1.07.