Manual Reference Pages - SANE-MUSTEK_USB2 (5)
sane-mustek_usb2 - SANE backend for SQ113 based USB flatbed scanners
sane-mustek_usb2 library implements a SANE (Scanner Access Now Easy) backend that provides
access to USB flatbed scanners based on the Service & Quality SQ113 chipset. At
the moment, only the Mustek BearPaw 2448 TA Pro is supported. Its planned to add
support for other scanners that are based on the SQ113 and maybe SQ11 chip. For
more details, see the mustek_usb2 backend homepage:
This is BETA software. Especially if you test new or untested scanners, keep
your hand at the scanners plug and unplug it, if the head bumps at the end of
the scan area.
If you own a scanner other than the ones listed on the mustek_usb2 homepage that works with this
backend, please let me know this by sending the scanners exact model name and
the USB vendor and device ids (e.g. from
sane-find-scanner or syslog) to me. Even if the scanners name is only slightly different from
the models already listed as supported, please let me know.
Please use libusb-0.1.8 or later. Without libusb or with older libusb versions
all kinds of trouble can be expected. The scanner should be found by
sane-find-scanner without further actions. For setting permissions and general
USB information looks at
The static library implementing this backend.
The shared library implementing this backend (present on systems that
support dynamic loading).
If the library was compiled with debug support enabled, this environment
variable controls the debug level for this backend. Higher debug levels
increase the verbosity of the output.
The driver has been written Roy Zhou, Jack Xu, and Vinci Cen from
Mustek. Adjustments to SANE by Henning Meier-Geinitz.
Please contact me if you find a bug or missing feature:
<firstname.lastname@example.org>. Please send a debug log if your scanner isnt
detected correctly (see SANE_DEBUG_MUSTEK_USB2 above).
| ||SANE-MUSTEK_USB2 (5) ||13 Jul 2008 |
Visit the GSP FreeBSD Man Page Interface.
Output converted with manServer 1.07.