Manual Reference Pages - SANE-XEROX_MFP (5)
sane-xerox_mfp - SANE backend for Xerox Phaser 3200MFP device
sane-xerox_mfp library implements a SANE (Scanner Access Now Easy) backend that provides
access to the following USB and network multifunction-peripheral:
Dell MFP Laser Printer 1815dn
Xerox Phaser 6110MFP
Samsung CLX-3170fn & CLX-3175FW
Xerox WorkCentre 3119 Series
If you own a scanner other than the ones listed above that works with this
backend, please let us know this by sending the scanners exact model name and
the USB vendor and device ids (e.g. from
sane-find-scanner or syslog) to us. Even if the scanners name is only slightly different from
the models mentioned above, please let us know.
/usr/local/etc/sane.d/xerox_mfp.conf USB scanners do not need any configuration.
For SCX-4500W in network mode you need to specify
tcp host_address [port]
host_address is passed through resolver, thus can be a dotted quad or a name from /etc/hosts or resolvable through DNS.
The backend configuration file. By default all scanner types/models are enabled, you
may want to comment out unwanted.
The static library implementing this backend.
The shared library implementing this backend (present on systems that
support dynamic loading).
SANE_DEBUG_XEROX_MFP If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend. Higher
debug levels increase the verbosity of the output.
Alex Belkin <firstname.lastname@example.org>
Samsung SCX-4500W scan over network support
Alexander Kuznetsov <acca(at)cpan.org>
Multicast autoconfiguration for LAN scanners is not implemented yet. IPv6 addressing never been tested.
| ||SANE-XEROX_MFP (5) ||15 Dec 2008 |
Visit the GSP FreeBSD Man Page Interface.
Output converted with manServer 1.07.