Manual Reference Pages - BACKUP_SCANTAPE (8)
backup_scantape - Extracts dump information from a tape
backup scantape [-dbadd] [-portoffset <TC port offset>]
[-localauth] [-cell <cell name>] [-help]
backup sc [-d] [-p <TC port offset>] [-l]
[-c <cell name>] [-h]
The backup scantape command extracts information from the dump labels
and volume headers on the tape in the device controlled by the Tape
Coordinator indicated by the -portoffset argument. The Tape Coordinator
displays the information for each volume in its window as soon as it
extracts it (rather than waiting until it has scanned the entire tape).
(If the FILE YES instruction appears in the
/var/openafs/backup/CFG_device_name file associated with the specified
port offset, then the backup scantape command extracts dump information
from the backup data file named in that port offsets entry in the
/var/openafs/backup/tapeconfig file on the Tape Coordinator machine, rather
than from a tape. For the sake of clarity, the following text refers to
tapes only, but the Backup System handles backup data files in much the
If the -dbadd flag is provided, the backup scantape command creates new
dump and volume records in the Backup Database for the scanned
information. However, if it finds that a record already exists in the
database for the same dump, it terminates the scanning operation.
The scanning operation works only on tapes containing volume data. The
command fails with an error message if the tape contains a copy of the
Backup Database (was created with the backup savedb command, or has the
AFS tape name Ubik_db_dump.1).
The Tape Coordinators default response to this command is to access the
tape by invoking the MOUNT instruction in the CFG_device_name
file, or by prompting the backup operator to insert the tape if there is
no MOUNT instruction. However, if the AUTOQUERY NO instruction
appears in the CFG_device_name file, or if the issuer of the butc
command included the -noautoquery flag, the Tape Coordinator instead
expects the tape to be in the device already. If it is not, the Tape
Coordinator invokes the MOUNT instruction or prompts the operator.
To terminate a tape scanning operation in interactive mode, issue the
backup kill command. In noninteractive mode, the only choice is to use
a termination signal such as Ctrl-C to halt the Tape Coordinator
A scanning operation does not have to begin with the first tape in a dump
set, but the Backup System can process tapes only in sequential order
after the initial tape provided. The Tape Coordinator automatically
requests any subsequent tapes by invoking the MOUNT instruction in the
local /var/openafs/backup/CFG_device_name file, or by prompting the
operator if there is no MOUNT instruction.
The Tape Coordinators success in scanning a tape that is corrupted or
damaged depends on the extent of the damage and what type of data is
corrupted. It can almost always scan the tape successfully up to the point
of damage. If the damage is minor, the Tape Coordinator can usually skip
over it and scan the rest of the tape, but more major damage can prevent
further scanning. Because a scanning operation can start on any tape in a
dump set, damage on one tape does not prevent scanning of the others in
the dump set. However, it is possible to scan either the tapes that
precede the damaged one or the ones that follow it, but not both.
If a tape is relabeled with the backup labeltape command, it is not
possible to recover data from it for the purposes of rebuilding the Backup
If the -dbadd flag is included on the command, it is best not to
terminate the tape scanning operation before it completes (for example, by
issuing the backup kill command in interactive mode). The Backup System
writes a new record in the Backup Database for each dump as soon as it
scans the relevant information on the tape, and so it possibly has already
written new records. If the operator wants to rerun the scanning
operation, he or she must locate and remove the records created during the
terminated operation: the second operation exits automatically if it finds
that a record that it needs to create already exists.
If the -dbadd flag is included and the first tape provided is not the
first tape in the dump set, the following restrictions apply:
If the first data on the tape is a continuation of a volume that begins on
the previous (unscanned) tape in the dump set, the Backup System does not
add a record for that volume to the Backup Database.
The Backup System must read the marker that indicates the start of an
appended dump to add database records for the volumes in it. If the first
volume on the tape belongs to an appended dump, but is not immediately
preceded by the appended-dump marker, the Backup System does not create a
Backup Database record for it or any subsequent volumes that belong to
that appended dump.
Adds the information extracted from the tape to the Backup Database (but
only if the database does not already contain an entry with the same dump
-portoffset <TC port offset>
Specifies the port offset number of the Tape Coordinator handling the
tapes for this operation.
Constructs a server ticket using a key from the local
/usr/local/etc/openafs/server/KeyFile file. The backup command interpreter presents
it to the Backup Server, Volume Server and VL Server during mutual
authentication. Do not combine this flag with the -cell argument. For
more details, see backup(8).
-cell <cell name>
Names the cell in which to run the command. Do not combine this argument
with the -localauth flag. For more details, see backup(8).
Prints the online help for this command. All other valid options are
For every dump on a tape, the backup scantape command displays in the Tape
Coordinator window the dump label and the volume header of each volume in
the dump. If a dump spans more than one tape, the dump label does not
repeat at the beginning of subsequent tapes.
A dump label contains the following fields, which are the same as in the
output from the backup readlabel command:
The volume header contains the following fields:
The permanent name assigned by using the -pname argument of the
backup labeltape command. This name remains on the tape until that
argument is used again, no matter how many times the tape is recycled or
otherwise relabeled. If the tape does not have a permanent name, the value
<NULL> appears in this field.
AFS tape name
A tape name in one of the following prescribed formats. The Backup System
automatically writes the appropriate AFS tape name to the label as part of
a backup dump operation, or the operator can assign it with the
-name argument to the backup labeltape command.
volume_set_name.dump_level_name.tape_index, if the tape contains
volume data. The volume_set_name is the name of the volume set that was
dumped to create the initial dump in the dump set of which this tape is a
part; dump_level_name is the last pathname element of the dump level at
which the initial dump was backed up; and tape_index is the numerical
position of the tape in the dump set.
<NULL> if the tape has no AFS tape name. This is normally the case
if the -name argument was not included the last time the backup
labeltape command was used on this tape, and no data has been written to
The date and time at which the Backup System started performing the dump
operation that created the initial dump.
The cell in which the dump set was created. This is the cell whose Backup
Database contains a record of the dump set.
The tapes capacity (in kilobytes) as recorded on the label, rather than
the amount of data on the tape. The value is assigned by the -size
argument to the backup labeltape command or derived from the
/var/openafs/backup/tapeconfig file on the Tape Coordinator machine, not
from a measurement of the tape.
The dump level of the initial dump in the dump set.
The dump ID number of the initial dump in the dump set, as recorded in the
The number of times a dump has been written to the tape, or it has been
The message Scantape: Finished indicates the completion of the output.
The volume name, complete with a .backup or .readonly extension, if
The volumes volume ID.
The dump to which the volume belongs. The dump name is of the form
volume_set_name.dump_level_name and matches the name displayed in
the dump label.
The dump ID of the dump named in the dumpSetName field.
The depth in the dump hierarchy of the dump level used in creating the
dump. A value of 0 indicates a full dump. A value of 1 or greater
indicates an incremental dump made at the indicated depth in the
hierarchy. The value reported is for the entire dump, not necessarily for
the volume itself; for example, it is possible for a dump performed at an
incremental level to include a full dump of an individual volume if the
volume was omitted from previous dumps.
The dump ID number of dumpSetNames parent dump. It is 0 if the
value in the level field is 0.
Is always 0; it is reserved for internal use.
The date and time at which the volume was created. For a backup or
read-only volume, this represents the time at which it was cloned from its
read/write source. For a read/write volume, it indicates the time at which
the Backup System locked the volume for purposes of including it in the
dump named in the dumpSetName field.
In normal circumstances, the Backup System writes a marker to indicate
that a volume is the last one on a tape, or that the volume continues on
the next tape. However, if a backup operation terminated abnormally (for
example, because the operator terminated the Tape Coordinator by issuing
the Ctrl-C command during the operation), then there is no such
marker. Some very early versions of the Backup System also did not write
these markers. If a tape does not conclude with one of the expected
markers, the Tape Coordinator cannot determine if there is a subsequent
tape in the dump set and so generates the following message in its window:
Are there more tapes? (y/n)
The following example shows the output for the first two volumes on a tape
in the device with port offset 0:
% backup scantape
tape name = monthly_guest
AFS tape name = guests.monthly.3
creationTime = Mon Feb 1 04:06:40 1999
cell = abc.com
size = 2150000 Kbytes
dump path = /monthly
dump id = 917860000
useCount = 44
-- End of dump label --
-- volume --
volume name: user.guest10.backup
volume ID 1937573829
clonedate Mon Feb 1 03:03:23 1999
-- volume --
volume name: user.guest11.backup
volume ID 1938519386
clonedate Mon Feb 1 03:05:15 1999
The issuer must be listed in the /usr/local/etc/openafs/server/UserList file on every
machine where the Backup Server is running, or must be logged onto a
server machine as the local superuser root if the -localauth flag is
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0. It was
converted from HTML to POD by software written by Chas Williams and Russ
Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.
|OpenAFS ||BACKUP_SCANTAPE (8) ||2015-10-28 |
Visit the GSP FreeBSD Man Page Interface.
Output converted with manServer 1.07.