Manual Reference Pages - VICTRONUPS (8)
victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps
This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see nutupsdrv(8).
The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the NetUps line.
The Match Lite line may only report a handful of variables. This is usually not a bug - they just dont support anything else.
If your Victron cable is broken or missing, use this diagram to build a clone:
This driver supports the following optional setting in the ups.conf(5):
Set model name
Set delay before shutdown on UPS
The protocol for this UPS is not officially documented.
Radek Benedikt <email@example.com>, Daniel Prynych <Daniel.Prynych@hornet.cz>
The core driver:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|Network UPS Tools 2&.7&.3&. ||VICTRONUPS (8) ||12/29/2015 |
Visit the GSP FreeBSD Man Page Interface.
Output converted with manServer 1.07.