GSP
Quick Navigator

Search Site

Unix VPS
A - Starter
B - Basic
C - Preferred
D - Commercial
MPS - Dedicated
Previous VPSs
* Sign Up! *

Support
Contact Us
Online Help
Handbooks
Domain Status
Man Pages

FAQ
Virtual Servers
Pricing
Billing
Technical

Network
Facilities
Connectivity
Topology Map

Miscellaneous
Server Agreement
Year 2038
Credits
 

USA Flag

 

 

Man Pages
ResourcePool::LoadBalancer(3) User Contributed Perl Documentation ResourcePool::LoadBalancer(3)

ResourcePool::LoadBalancer - A load balancer across ResourcePool's

 use ResourcePool::LoadBalancer;
 
 my $loadbalancer = ResourcePool::LoadBalancer->new("key", MaxTry => 10);
 
 $loadbalancer->add_pool($some_ResourcePool);
 $loadbalancer->add_pool($some_other_ResourcePool);
 $loadbalancer->add_pool($third_ResourcePool);
 
 my $resource = $loadbalancer->get();  # get a resource from one pool
                                       # according to the policy
 #[...]                                # do something with $resource
 $loadbalancer->free($resource);       # give it back to the pool
 
 $loadbalancer->fail($resource);       # give back a failed resource

The ResourcePool::LoadBalancer is a generic way to spread requests to different ResourcePool's to increase performance and/or availability.

Besides the construction the interface of ResourcePool::LoadBalancer is the same as the interface of ResourcePool. This makes it very simple to change a program which uses ResourcePool to use the ResourcePool::LoadBalancer by just changing the construction (which is hopefully kept at a central point in your program).

Creates a new ResourcePool::LoadBalancer. This method takes one key to identify the load balancer (used by ResourcePool::Singleton). It is recommended to use some meaningful string as key, since this is used when errors are reported. This key is internally used to distinguish between different pool types, e.g. if you have two ResourcePool::LoadBalancer one for DBI connections to different servers and use parallel another ResourcePool::LoadBalancer for Net::LDAP connections.
@Options
Policy
With this option you can specify which ResourcePool is used if you ask the ResourcePool::LoadBalancer for a resource. You can choose one of these policies:
LeastUsage
Takes always the ResourcePool with the least used resources. This is usually the best policy if you want to do load balancing. For most configurations the ResourcePool with the least used resources will be the ResourcePool which accesses the lowest loaded server.

If all ResourcePool's are equally used this policy will fall back to a RoundRobin behavior. This is very useful to keep your connections alive if you have a stateful firewall which might timeout your connection.

RoundRobin
Iterates over all available ResourcePool's regardless of the usage of them. So, every time you call get() the next ResourcePool will be used.
FailBack
Uses always the first ResourcePool if it works, only if there is a problem it takes the next one (and so on). For this policy the order in which you pass the pools to ResourcePool::LoadBalancer is relevant.

This policy will try to recover to the first pool.

FailOver
Uses always the first ResourcePool if it works, if there is a problem it will fail over to the second and stay there until it has a problem with this pool as well. If all pools failed, it starts from the first again. For this policy the order in which you pass the pools to ResourcePool::LoadBalancer is relevant.

This policy will NOT try to recover to the first pool.

FallBack
A synonym for the FailBack policy.

Regardless of the used Policy, the load balancer will always try to find a valid resource for you. All resources do fail over if required.

Default: LeastUsage

MaxTry
The MaxTry option specifies how often the load balancer checks all it's ResourcePool's for a valid resource before it gives up and returns undef on the get() call.

This option is very similar to the same named option from the ResourcePool. But keep in mind that this value specifies how often ResourcePool::LoadBalancer will cycle through ALL configured ResourcePool's. It does NOT specify how many ResourcePool's are checked before giving up. So if you add another ResourcePool you do not need to adjust this value. This value will only be used if ALL configured ResourcePool's failed to deliver a valid resource.

Default: 6

SleepOnFail
Very similar to the same named option from ResourcePool. Tells the load balancer to sleep if it was not able to find a valid resource in ANY of the underlying ResourcePool's. So, in the worst case, get() tries all ResourcePool's (all which are not suspended) to obtain a valid resource, if this fails it sleeps. After this sleep all pools are checked again and if it was still not possible to get a valid resource it sleeps again. This is done up to > times before get() fails and returns undef.

Default: [0, 1, 2, 4, 8]

Adds a ResourcePool object to the load balancer. You must call this method multiple times to add more pools. You can add as many ResourcePool's as you want.

There are two options which affect the way the load balancer selects the ResourcePool's.

$resourcepool
The ResourcePool being added.
@options
Weight
Weight may make one ResourcePool more relevant then others. A ResourcePool with a high Weight is more expansive then a ResourcePoolwith a low Weight and will be used less frequent by the load balancer.

Note: The only policy which takes the Weighting into account is LeastUsage.

Default: 100

SuspendTimeout
Every time a ResourcePool fails to deliver a valid resource, the load balancer will suspend it for SuspendTimeout seconds.

So until the timeout has passed by the load balancer will not use this ResourcePool again. This can save a lot of time if it takes long to notice that a server is broken down.

Default: 5

Returns a resource. This resource has to be given back via the free() or fail() method. The get() method calls the get() method of the ResourcePool and might therefore return undef if no valid resource could be found in ALL ResourcePool's. In that case the load balancer will suspend the ResourcePool which returned the invalid resource and try the other (non suspended) ResourcePool's (see >). If it is not possible to find a valid resource in ANY configured ResourcePool, the load balancer will sleep (see >) and repeat this procedure up to > times. If, after all, the load balancer was not able to obtain a valid resource the get() method will return undef.

According to the > and > settings the get() call might block the programs execution if it is not able to find a valid resource right now. Provided that you use the default settings for > and > a call to get() will block at least for 15 seconds before returning undef. Please see the TIMEOUTS section in the ResourcePool documentation for some other effects which might affect the time which get() blocks before it returns undef.

Returns: undef

Marks a resource as free. Basically the same as the free() method of the ResourcePool.

Returns: Return value is true on success or false if the resource doesn't belong to this load balancer.

Marks the resource as bad. Basically the same as the fail() method of the ResourcePool.

Returns: Return value is true on success or false if the resource doesn't belong to this load balancer.

A basic example...

 use ResourcePool;
 use ResourcePool::Factory::Net::LDAP;
 use ResourcePool::LoadBalancer;
 
 ### LoadBalancer setup 
 
 # create a pool to a ldap server
 my $factory1 = ResourcePool::Factory::Net::LDAP->new("ldap.you.com");
 my $pool1    = ResourcePool->new($factory1);
 
 # create a pool to another ldap server
 my $factory2 = ResourcePool::Factory::Net::LDAP->new("ldap2.you.com");
 my $pool2    = ResourcePool->new($factory2);
 
 # create a empty loadbalancer with a FailBack policy
 my $loadbalancer = ResourcePool::LoadBalancer->new("LDAP", 
                        Policy => "FailBack");
 
 # add the first pool to the LoadBalancer
 # since this LoadBalancer was configured to use the FailBack
 # policy, this is the primary used pool
 $loadbalancer->add_pool($pool1);
 
 # add the second pool to the LoadBalancer.
 # This pool is only used when first pool fails
 $loadbalancer->add_pool($pool2);
 
 ### LoadBalancer usage (no difference to ResourcePool)
 for (my $i = 0; $i < 1000000 ; $i++) {
    my $resource = $loadbalancer->get();  # get a resource from one pool
                                          # according to the policy
    if (defined $resource) {
       eval {
          #[...]                          # do something with $resource
          $loadbalancer->free($resource); # give it back to the pool
       }; 
       if ($@) { # an exception happened
          $loadbalancer->fail($resource); # give back a failed resource
       }
    } else {
       die "The LoadBalancer was not able to obtain a valid resource\n";
    }
 }

Please notice that the get()/ free() stuff in this example in INSIDE the loop. This is very important to make sure the load balancing and fail over works. As for the ResourcePool the smartness of the load balancer lies in the get() method, so if you do not call the get() method regular you can not expect the load balancer to handle load balancing or fail over.

The example above does not do any load balancing since the policy was set to FailBack. If you would change this to RoundRobin or LeastUsage you would spread the load across both servers.

You can directly copy and past the example above and try to run it. If you do not change the hostnames you will just see how it fails, but even this will tell you a lot about how it works. Give it a try.

Now lets make a slightly more complex configuration. Imagine you have three ldap servers: one master where you do your write access, two replicas where you do the read access. Now we want ResourcePool::LoadBalancer to implement a load balancing across the two replicas but we want it to use the master also for read access if both replicas are not available.

This setup is simple if you keep in mind what I have said about the ResourcePool::LoadBalancer interface: "Beside the construction the interface of ResourcePool::LoadBalancer is the same as the interface of ResourcePool. This means that it is possible to make a nested load balancer chain.

 use ResourcePool;
 use ResourcePool::Factory::Net::LDAP;
 use ResourcePool::LoadBalancer;
 
 ### LoadBalancer setup 
 
 # create a pool to the master
 my $masterfactory   = ResourcePool::Factory::Net::LDAP->new("master");
 my $master          = ResourcePool->new($masterfactory);
 
 # create pools to the replicas
 my $replica1factory = ResourcePool::Factory::Net::LDAP->new("replica1");
 my $replica1        = ResourcePool->new($replica1factory);
 
 my $replica2factory = ResourcePool::Factory::Net::LDAP->new("replica2");
 my $replica2        = ResourcePool->new($replica2factory);
 
 # create the loadbalancer to spread load across the two replicas
 # using the default Policy LeastUsage
 my $replicaLB       = ResourcePool::LoadBalancer->new("LDAP-Replica");
 $replicaLB->add_pool($replica1);
 $replicaLB->add_pool($replica2);
 
 # create a superior loadbalancer which handles the FailBack to the
 # master if both replicas fail.
 my $loadbalancer = ResourcePool::LoadBalancer->new("LDAP", 
                        Policy => "FailBack");
 $loadbalancer->add_pool($replicaLB);   # HERE IS THE MAGIC
 $loadbalancer->add_pool($master);
 
 ### LoadBalancer usage is the same as above, therefore skipped here

You should keep in mind that this configuration causes a multiplication of the timeout's which are done because of the > settings. In the example above the sleeps sum up to 60 seconds.

ResourcePool, ResourcePool::BigPicture, ResourcePool::UML

    Copyright (C) 2001-2009 by Markus Winand <mws@fatalmind.com>

    This program is free software; you can redistribute it and/or
    modify it under the same terms as Perl itself.
2009-11-25 perl v5.32.1

Search for    or go to Top of page |  Section 3 |  Main Index

Powered by GSP Visit the GSP FreeBSD Man Page Interface.
Output converted with ManDoc.