GSP
Quick Navigator

Search Site

Unix VPS
A - Starter
B - Basic
C - Preferred
D - Commercial
MPS - Dedicated
Previous VPSs
* Sign Up! *

Support
Contact Us
Online Help
Handbooks
Domain Status
Man Pages

FAQ
Virtual Servers
Pricing
Billing
Technical

Network
Facilities
Connectivity
Topology Map

Miscellaneous
Server Agreement
Year 2038
Credits
 

USA Flag

 

 

Man Pages
SNMP::Info::CiscoConfig(3) User Contributed Perl Documentation SNMP::Info::CiscoConfig(3)

SNMP::Info::CiscoConfig - SNMP Interface to Cisco Configuration Files

Justin Hunter, Eric Miller

    my $ciscoconfig = new SNMP::Info(
                          AutoSpecify => 1,
                          Debug       => 1,
                          DestHost    => 'myswitch',
                          Community   => 'public',
                          Version     => 2
                        )

    or die "Can't connect to DestHost.\n";

    my $class = $ciscoconfig->class();
    print " Using device sub class : $class\n";

SNMP::Info::CiscoConfig is a subclass of SNMP::Info that provides an interface to CISCO-CONFIG-COPY-MIB, CISCO-FLASH-MIB, and OLD-CISCO-SYS-MIB. These MIBs facilitate the writing of configuration files.

Use or create a subclass of SNMP::Info that inherits this one. Do not use directly.

None.

CISCO-CONFIG-COPY-MIB
CISCO-FLASH-MIB
OLD-CISCO-SYS-MIB

These are methods that return scalar value from SNMP
$ciscoconfig->old_write_mem()
("writeMem")
$ciscoconfig->old_write_net()
("writeNet")

These are methods that return tables of information in the form of a reference to a hash.

$ciscoconfig->config_protocol()
("ccCopyProtocol")
$ciscoconfig->config_source_type()
("ccCopySourceFileType")
$ciscoconfig->config_dest_type()
("ccCopyDestFileType")
$ciscoconfig->config_server_addr()
("ccCopyServerAddress")
$ciscoconfig->config_filename()
("ccCopyFileName")
$ciscoconfig->config_username()
("ccCopyUserName")
$ciscoconfig->config_password()
("ccCopyUserPassword")
$ciscoconfig->config_notify_complete()
("ccCopyNotificationOnCompletion")
$ciscoconfig->config_copy_state()
("ccCopyState")
$ciscoconfig->config_copy_start_time()
("ccCopyTimeStarted")
$ciscoconfig->config_copy_complete_time()
("ccCopyTimeCompleted")
$ciscoconfig->config_fail_cause()
("ccCopyFailCause")
$ciscoconfig->config_row_status()
("ccCopyEntryRowStatus")

Table of Flash copy operation entries.
$ciscoconfig->flash_copy_cmd()
("ciscoFlashCopyCommand")
$ciscoconfig->flash_copy_protocol()
("ciscoFlashCopyProtocol")
$ciscoconfig->flash_copy_address()
("ciscoFlashCopyServerAddress")
$ciscoconfig->flash_copy_source()
("ciscoFlashCopySourceName")
$ciscoconfig->flash_copy_dest()
("ciscoFlashCopyDestinationName")
$ciscoconfig->flash_copy_row_status()
("ciscoFlashCopyEntryStatus")

These are methods that provide SNMP set functionality for overridden methods or provide a simpler interface to complex set operations. See "SETTING DATA VIA SNMP" in SNMP::Info for general information on set operations.
$ciscoconfig->copy_run_tftp (tftpserver, tftpfilename )
Store the running configuration on a TFTP server. Equivalent to the CLI commands "copy running-config tftp" or "write net".

This method attempts to use newer "copy running-config tftp" procedure first and then the older "write net" procedure if that fails. The newer procedure is supported Cisco devices with the CISCO-CONFIG-COPY-MIB available, Cisco IOS software release 12.0 or on some devices as early as release 11.2P. The older procedure has been depreciated by Cisco and is utilized only to support devices running older code revisions.

 Example:
 $ciscoconfig->copy_run_tftp('1.2.3.4', 'myconfig')
    or die "Couldn't save config. ",$ciscoconfig->error(1);
    
$ciscoconfig->copy_run_start()
Copy the running configuration to the start up configuration. Equivalent to the CLI command "copy running-config startup-config" or "write mem".

This method attempts to use newer "copy running-config startup-config" procedure first and then the older "write mem" procedure if that fails. The newer procedure is supported Cisco devices with the CISCO-CONFIG-COPY-MIB available, Cisco IOS software release 12.0 or on some devices as early as release 11.2P. The older procedure has been depreciated by Cisco and is utilized only to support devices running older code revisions.

 Example:
 $ciscoconfig->copy_run_start()
    or die "Couldn't save config. ",$ciscoconfig->error(1);
    
2022-04-07 perl v5.32.1

Search for    or go to Top of page |  Section 3 |  Main Index

Powered by GSP Visit the GSP FreeBSD Man Page Interface.
Output converted with ManDoc.