|-a interface, --accept interface or --bind interface|
Specify an interface that will be used to listen for client connections.
By default, all network interfaces are used.
|-b bytecount or --bytes bytecount|
Limit the length of a TCP session to
bytecount bytes. If a session exceeds this quantity, it will be closed on the
next data packet boundary.
|-c or --connect|
Connect to the specified client instead of waiting for the client to
connect. This is meant for expert users who know what they are doing only.
If no hostname is specified, TCPreen will try to connect to the local host.
Use -a address to specify the client address to connect to.
|-d or --daemon|
Turn on daemon mode.
When this option is selected, TCPreen will run in the background
and send informations to syslog instead of the console.
This enables quiet mode and multiple clients mode automatically.
You will probably want to use option -F as well.
NOTE: if you turn this feature on, log files will be created from the root directory, not from the current one. See daemon(3) for more details.
|-f logformat or --format logformat|
Selects a format for output. Supported formats includes:
C (C source strings-like encoding),
hex (hexadecimal data dump),
count (write quantities of data),
null (only displays new connections addresses),
password (basic password capture, unfinished yet),
raw (write data as is, even if it is not 7-bit clean),
strip (replace non printable characters with dots). |
|-F nproc or --fork nproc|
Specifies the maximum number of sessions that can be treated at the
By default, only one session is allowed at a time not so as to keep
the program output easy to read.
|-h or --help|
Display some help and exit.
|-l or --listen|
Listen for the "server" instead of connecting to it. This can be used
by advanced users to run a human brain-powered server by telnet-ing to
TCPreen server address. An optionnal listening interface address can be specified.
|-m conn_num or --maxconn conn_num|
Handle conn_num consecutive client connections before exiting. When this option is not used, the program will run forever (until interrupted).
|-n or --numeric|
Disable reverse DNS lookup and service name resolution.
Node names and port numbers will appear in numeric form.
This option will speed up connections a little.
|-o logfile or --output logfile|
Save data to file
logfile. If it already exists, it will be overwritten. "-" is used for
Multiple log files can be used (with different formats). For example:
tcpreen -f hex -o hexafile.log -f C -o file.log smtp
will save hexafile.log in hexadecimal and file.log in C encoding.
|-p or --protocol|
Specifies which network protocol(s) is/are going to be used.
If a single protocol name is specified, it will be used both ways.
Two different protocols can be used on each side by separating them
with a slash like this: tcp/tcp6. The first protocol will then be used to
communicate with the server, the last one will be used to exchange data with
The following protocols are currently recognized: tcp (TCP over IPv4), tcp6 (TCP over IPv6) and unix or local (Unix interprocess streams). By default, tcp is used.
|-q or --quiet|
Turn on quiet mode:
Do not write anything on the standard output (stdout). |
|-s hostname or --server hostname|
Connect to the specified server instead of the local host which is used by
|-u user or --user user|
When run as super-user, drop privilege and set UID to that of
user (it must be a valid username). That is highly recommended if
tcpreen is to be bound to a reserved port, which only root can bind on Unix systems.
You must be root to use this option.
|-v or --verbose|
Increase program verbosity. This can be cumulated.
|-V or --version|
Display program version and license and exit.
These are common problems:
Nothing happens:The client is communicating with the server correctly, but TCPreen stays quiet. Make sure you told the client to connect to TCPreen address rather than the actual server address.Strange port names:
Make sure you have enabled verbose mode.
Have a look at /etc/services and you will realize what this means. Alternatively, you may want to use -n.
tcpreen requires root privileges to be bound to a reserved TCP port (under 1024). If you really need to do so, you may run tcpreen Set-UID root. In such circumstances, you must ensure that only trustworthy users can run tcpreen, as it could be used to divert traffic to any reserved ports on the system.
tcpreen will automatically drop privileges as soon as it has allocated its listening socket(s) to limit exposure. Log files are always created with the default permission of the current user.
Care should be taken when using tcpreen as it could be used to access your network or system from the outside (that is why it will normally refuse to run as root).
Remi Denis-Courmont <rdenis at simphalempin.com>
$Id: tcpreen.1 178 2006-03-18 18:10:23Z remi $
|tcpreen||TCPREEN (1)||$Date: 2006-03-18 20:10:23 +0200 (sam, 18 mar 2006) $|