Quick Navigator

Search Site

Unix VPS
A - Starter
B - Basic
C - Preferred
D - Commercial
MPS - Dedicated
Previous VPSs
* Sign Up! *

Contact Us
Online Help
Domain Status
Man Pages

Virtual Servers

Topology Map

Server Agreement
Year 2038

USA Flag



Man Pages

Manual Reference Pages  -  AUTHEN::PASSPHRASE::BLOWFISHCRYPT (3)

.ds Aq ’


Authen::Passphrase::BlowfishCrypt - passphrases using the Blowfish-based Unix crypt()



        use Authen::Passphrase::BlowfishCrypt;

        $ppr = Authen::Passphrase::BlowfishCrypt->new(
                cost => 8,
                salt => "sodium__chloride",
                hash_base64 => "BPZijhMHLvPeNMHd6XwZyNamOXVBTPi");

        $ppr = Authen::Passphrase::BlowfishCrypt->new(
                cost => 8, salt_random => 1,
                passphrase => "passphrase");

        $ppr = Authen::Passphrase::BlowfishCrypt->from_crypt(

        $ppr = Authen::Passphrase::BlowfishCrypt->from_rfc2307(

        $key_nul = $ppr->key_nul;
        $cost = $ppr->cost;
        $cost = $ppr->keying_nrounds_log2;
        $salt = $ppr->salt;
        $salt_base64 = $ppr->salt_base64;
        $hash = $ppr->hash;
        $hash_base64 = $ppr->hash_base64;

        if($ppr->match($passphrase)) { ...

        $passwd = $ppr->as_crypt;
        $userPassword = $ppr->as_rfc2307;


An object of this class encapsulates a passphrase hashed using the Blowfish-based Unix crypt() hash function, known as bcrypt. This is a subclass of Authen::Passphrase, and this document assumes that the reader is familiar with the documentation for that class.

The crypt() function in a modern Unix actually supports several different passphrase schemes. This class is concerned only with one particular scheme, a Blowfish-based algorithm designed by Niels Provos and David Mazieres for OpenBSD. To handle the whole range of passphrase schemes supported by the modern crypt(), see the from_crypt constructor and the as_crypt method in Authen::Passphrase.

The Blowfish-based crypt() scheme uses a variant of Blowfish called Eksblowfish, for expensive key schedule Blowfish. It has the cryptographic strength of Blowfish, and a very slow key setup phase to resist brute-force attacks. There is a cost parameter to the scheme: the length of key setup is proportional to 2^cost. There is a 128-bit salt. Up to 72 characters of the passphrase will be used; any more will be ignored.

The cost, salt, and passphrase are all used to (very slowly) key Eksblowfish. Once key setup is done, the string OrpheanBeholderScryDoubt (three Blowfish blocks long) is encrypted 64 times in ECB mode. The final byte of the ciphertext is then dropped, yielding a 23-byte hash.

In the crypt() function the salt and hash are represented in ASCII using a base 64 encoding. The base 64 digits are "<B>.B>, <B>/B>, <B>AB> to <B>ZB>, <B>aB> to <B>zB>, <B>0B> to <B>9B>" (in that order). The 16-byte salt is represented as 22 base 64 digits, and the 23-byte hash as 31 base 64 digits.

This algorithm is intended for situations where the efficiency of a brute force attack is a concern. It is suitable for use in new applications where this requirement exists. If that is not a concern, and it suffices to merely make brute force the most efficient attack, see Authen::Passphrase::SaltedDigest for more efficient hash algorithms.

Choice of the cost parameter is critical, due to the need to trade off expense of brute-force attack against speed of legitimate passphrase verification. A traditional target is that verification should take about one second on widely-available hardware. (Algorithms that are concerned about brute force speed but lack a cost parameter have often aimed for this, with respect to hardware available at the time of the algorithm’s introduction.) As of 2011, this is achieved with a cost parameter around 14.


Authen::Passphrase::BlowfishCrypt->new(ATTR => VALUE, ...) Generates a new passphrase recogniser object using the Blowfish-based crypt() algorithm. The following attributes may be given:
<B>key_nulB> Truth value indicating whether to append a NUL to the passphrase before using it as a key. The algorithm as originally devised does not do this, but it was later modified to do it. The version that does append NUL is to be preferred. Default true.
<B>costB> Base-two logarithm of the number of keying rounds to perform.
<B>keying_nrounds_log2B> Synonym for <B>costB>.
<B>saltB> The salt, as a 16-byte string.
<B>salt_base64B> The salt, as a string of 22 base 64 digits.
<B>salt_randomB> Causes salt to be generated randomly. The value given for this attribute is ignored. The source of randomness may be controlled by the facility described in Data::Entropy.
<B>hashB> The hash, as a 23-byte string.
<B>hash_base64B> The hash, as a string of 31 base 64 digits.
<B>passphraseB> A passphrase that will be accepted.

The cost and salt must be given, and either the hash or the passphrase.

Authen::Passphrase::BlowfishCrypt->from_crypt(PASSWD) Generates a new passphrase recogniser object using the Blowfish-based crypt() algorithm, from a crypt string. The crypt string must start with "<B>B>$2<B>$B> for the version that does not append NUL to the key, or <B>B>$2a<B>$B> for the version that does. The next two characters must be decimal digits giving the cost parameter. This must be followed by <B>$B>", 22 base 64 digits giving the salt, and finally 31 base 64 digits giving the hash.
Authen::Passphrase::BlowfishCrypt->from_rfc2307(USERPASSWORD) Generates a new passphrase recogniser object using the Blowfish-based crypt() algorithm, from an RFC 2307 string. The string must consist of "<B>{CRYPT}B>" (case insensitive) followed by an acceptable crypt string.


$ppr->key_nul Returns a truth value indicating whether a NUL will be appended to the passphrase before using it as a key.
$ppr->cost Returns the base-two logarithm of the number of keying rounds that will be performed.
$ppr->keying_nrounds_log2 Synonym for cost.
$ppr->salt Returns the salt, as a string of sixteen bytes.
$ppr->salt_base64 Returns the salt, as a string of 22 base 64 digits.
$ppr->hash Returns the hash value, as a string of 23 bytes.
$ppr->hash_base64 Returns the hash value, as a string of 31 base 64 digits.
$ppr->as_rfc2307 These methods are part of the standard Authen::Passphrase interface.


Authen::Passphrase, Crypt::Eksblowfish::Bcrypt


Andrew Main (Zefram) <>


Copyright (C) 2006, 2007, 2009, 2010, 2012 Andrew Main (Zefram) <>


This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
Search for    or go to Top of page |  Section 3 |  Main Index

perl v5.20.3 AUTHEN::PASSPHRASE::BLOWFISHCRYPT (3) 2016-03-17

Powered by GSP Visit the GSP FreeBSD Man Page Interface.
Output converted with manServer 1.07.