GSP
Quick Navigator

Search Site

Unix VPS
A - Starter
B - Basic
C - Preferred
D - Commercial
MPS - Dedicated
Previous VPSs
* Sign Up! *

Support
Contact Us
Online Help
Handbooks
Domain Status
Man Pages

FAQ
Virtual Servers
Pricing
Billing
Technical

Network
Facilities
Connectivity
Topology Map

Miscellaneous
Server Agreement
Year 2038
Credits
 

USA Flag

 

 

Man Pages
SNMP::Info::Layer2::HP(3) User Contributed Perl Documentation SNMP::Info::Layer2::HP(3)

SNMP::Info::Layer2::HP - SNMP Interface to HP Procurve Switches

Max Baker

 # Let SNMP::Info determine the correct subclass for you.
 my $hp = new SNMP::Info(
                          AutoSpecify => 1,
                          Debug       => 1,
                          DestHost    => 'myswitch',
                          Community   => 'public',
                          Version     => 2
                        )
    or die "Can't connect to DestHost.\n";

 my $class      = $hp->class();
 print "SNMP::Info determined this device to fall under subclass : $class\n";

Provides abstraction to the configuration information obtainable from a HP ProCurve Switch via SNMP.

Note: Some HP Switches will connect via SNMP version 1, but a lot of config data will not be available. Make sure you try and connect with Version 2 first, and then fail back to version 1.

For speed or debugging purposes you can call the subclass directly, but not after determining a more specific class using the method above.

 my $hp = new SNMP::Info::Layer2::HP(...);

SNMP::Info::Layer2
SNMP::Info::MAU

RFC1271-MIB
Included in V2 mibs from Cisco
HP-ICF-OID
(this MIB new with SNMP::Info 0.8)
STATISTICS-MIB
NETSWITCH-MIB
CONFIG-MIB
HP-ICF-BRIDGE
HP-ICF-POE-MIB
HP-ICF-CHASSIS
SEMI-MIB
HP-SWITCH-PL-MIB
BLADETYPE4-NETWORK-MIB

The last four MIBs listed are from HP and can be found at <http://www.hp.com/rnd/software> or <http://www.hp.com/rnd/software/MIBs.htm>

Version 0.4 - Removed ENTITY-MIB e_*() methods to separate sub-class - SNMP::Info::Entity

These are methods that return scalar value from SNMP
$hp->cpu()
Returns CPU Utilization in percentage.
$hp->log()
Returns all the log entries from the switch's log that are not Link up or down messages.
$hp->mem_free()
Returns bytes of free memory
$hp->mem_total()
Return bytes of total memory
$hp->mem_used()
Returns bytes of used memory
$hp->model()
Returns the model number of the HP Switch. Will translate between the HP Part number and the common model number with this map :

 %MODEL_MAP = (
    'J8131A' => 'WAP-420-WW',
    'J8130A' => 'WAP-420-NA',
    'J8133A' => 'AP520WL',
    'J8680A' => '9408sl',
    'J9091A' => '8212zl',
    'J9475A' => '8206zl',
    'J9265A' => '6600ml-24XG',
    'J9264A' => '6600ml-24G-4XG',
    'J9263A' => '6600ml-24G',
    'J9452A' => '6600-48G-4XG',
    'J9451A' => '6600-48G',
    'J8474A' => '6410cl-6XG',
    'J8433A' => '6400cl-6XG',
    'J8992A' => '6200yl-24G',
    'J4902A' => '6108',
    'J8698A' => '5412zl',
    'J8719A' => '5408yl',
    'J8697A' => '5406zl',
    'J8718A' => '5404yl',
    'J4819A' => '5308XL',
    'J4850A' => '5304XL',
    'J8773A' => '4208vl',
    'J8770A' => '4204vl',
    'J8772A' => '4202vl-72',
    'J9032A' => '4202vl-68G',
    'J9031A' => '4202vl-68',
    'J8771A' => '4202vl-48G',
    'J4865A' => '4108GL',
    'J4887A' => '4104GL',
    'J9588A' => '3800-48G-PoE+-4XG',
    'J9574A' => '3800-48G-PoE+-4SFP+',
    'J9586A' => '3800-48G-4XG',
    'J9576A' => '3800-48G-4SFP+',
    'J9584A' => '3800-24SFP-2SFP+',
    'J9587A' => '3800-24G-PoE+-2XG',
    'J9573A' => '3800-24G-PoE+-2SFP+',
    'J9585A' => '3800-24G-2XG',
    'J9575A' => '3800-24G-2SFP+',
    'J8693A' => '3500yl-48G-PWR',
    'J8692A' => '3500yl-24G-PWR',
    'J9473A' => '3500-48-PoE',
    'J9472A' => '3500-48',
    'J9471A' => '3500-24-PoE',
    'J9470A' => '3500-24',
    'J4906A' => '3400cl-48G',
    'J4905A' => '3400cl-24G',
    'J4815A' => '3324XL',
    'J4851A' => '3124',
    'J9562A' => '2915-8G-PoE',
    'J9148A' => '2910al-48G-PoE+',
    'J9147A' => '2910al-48G',
    'J9146A' => '2910al-24G-PoE+',
    'J9145A' => '2910al-24G',
    'J9050A' => '2900-48G',
    'J9049A' => '2900-24G',
    'J4904A' => '2848',
    'J4903A' => '2824',
    'J9022A' => '2810-48G',
    'J9021A' => '2810-24G',
    'J8165A' => '2650-PWR',
    'J4899B' => '2650-CR',
    'J4899C' => '2650C',
    'J4899A' => '2650',
    'J8164A' => '2626-PWR',
    'J4900B' => '2626-CR',
    'J4900C' => '2626C',
    'J4900A' => '2626',
    'J9627A' => '2620-48-PoE+',
    'J9626A' => '2620-48',
    'J9624A' => '2620-24-PPoE+',
    'J9625A' => '2620-24-PoE+',
    'J9623A' => '2620-24',
    'J9565A' => '2615-8-PoE',
    'J9089A' => '2610-48-PWR',
    'J9088A' => '2610-48',
    'J9087A' => '2610-24-PWR',
    'J9086A' => '2610-24/12PWR',
    'J9085A' => '2610-24',
    'J8762A' => '2600-8-PWR',
    'J4813A' => '2524',
    'J9298A' => '2520G-8-PoE',
    'J9299A' => '2520G-24-PoE',
    'J9137A' => '2520-8-PoE',
    'J9138A' => '2520-24-PoE',
    'J4812A' => '2512',
    'J9280A' => '2510G-48',
    'J9279A' => '2510G-24',
    'J9020A' => '2510-48A',
    'J9019B' => '2510-24B',
    'J9019A' => '2510-24A',
    'J4818A' => '2324',
    'J4817A' => '2312',
    'J9449A' => '1810G-8',
    'J9450A' => '1810G-24',
    'J9029A' => '1800-8G',
    'J9028A' => '1800-24G',
 );
    
$hp->os()
Returns hp
$hp->os_bin()
"hpSwitchRomVersion.0"
$hp->os_ver()
Tries to use os_version() and if that fails will try and cull the version from the description field.
$hp->os_version()
"hpSwitchOsVersion.0"
$hp->serial()
Returns serial number if available through SNMP
$hp->slots()
Returns number of entries in $hp->e_name that have 'slot' in them.
$hp->vendor()
hp
$hp->fan()
Returns fan status
$hp->ps1_status()
Power supply 1 status
$hp->ps2_status()
Power supply 2 status
$hp->peth_port_power()
Power supplied by PoE ports, in milliwatts ("hpicfPoePethPsePortPower")
$hp->stp_ver()
Returns what version of STP the device is running. ("hpicfBridgeRstpForceVersion" with fallback to inherited stp_ver())

See documentation in "GLOBALS" in SNMP::Info::Layer2 for details.

See documentation in "GLOBALS" in SNMP::Info::MAU for details.

These are methods that return tables of information in the form of a reference to a hash.

$hp->interfaces()
Uses $hp->i_description()
$hp->i_duplex()
Returns reference to map of IIDs to current link duplex.
$hp->i_duplex_admin()
Returns reference to hash of IIDs to admin duplex setting.
$hp->vendor_i_type()
Returns reference to hash of IIDs to HP specific port type ("hpSwitchPortType").
$hp->i_name()
Crosses i_name() with $hp->e_name() using $hp->e_port() and i_alias()
$hp->peth_port_ifindex()
Returns reference to hash of power Ethernet port table entries map back to interface index (c<ifIndex>)
"agg_ports"
Returns a HASH reference mapping from slave to master port for each member of a port bundle on the device. Keys are ifIndex of the slave ports, Values are ifIndex of the corresponding master ports.

See documentation in "TABLE METHODS" in SNMP::Info::Layer2 for details.

See documentation in "TABLE METHODS" in SNMP::Info::MAU for details.

munge_hp_c_id()
Munge for c_id which handles CDP and LLDP.

These are methods that provide SNMP set functionality for overridden methods or provide a simpler interface to complex set operations. See "SETTING DATA VIA SNMP" in SNMP::Info for general information on set operations.
set_i_vlan()
set_i_vlan_tagged()
2022-04-07 perl v5.32.1

Search for    or go to Top of page |  Section 3 |  Main Index

Powered by GSP Visit the GSP FreeBSD Man Page Interface.
Output converted with ManDoc.