GSP
Quick Navigator

Search Site

Unix VPS
A - Starter
B - Basic
C - Preferred
D - Commercial
MPS - Dedicated
Previous VPSs
* Sign Up! *

Support
Contact Us
Online Help
Handbooks
Domain Status
Man Pages

FAQ
Virtual Servers
Pricing
Billing
Technical

Network
Facilities
Connectivity
Topology Map

Miscellaneous
Server Agreement
Year 2038
Credits
 

USA Flag

 

 

Man Pages


Manual Reference Pages  -  MCD (4)

NAME

mcd - Mitsumi CD-ROM driver

CONTENTS

Synopsis
Description
Files
Notes
See Also
History
Authors

SYNOPSIS


.Cd device mcd

In /boot/device.hints:
.Cd hint.mcd.0.at= isa
.Cd hint.mcd.0.port= 0x300
.Cd hint.mcd.0.irq= 10

DESCRIPTION

The mcd driver provides a data and audio interface to the Mitsumi-brand CD-ROM player. The CD-ROM player must be interfaced to the ISA bus through one of the Mitsumi proprietary controller boards. The controller boards supported are the LU002S, LU005S, the FX001 and the quite common FX001D.

The mcd driver responds to disk-specific ioctl commands, namely the DIOCGDINFO, DIOCGPART, DIOCWDINFO, and DIOCSDINFO, commands. Other disk-specific ioctl commands will return an error.

The mcd driver also responds to special CD-ROM ioctl commands. These commands control the CD-ROM player’s audio features. The commands are:

CDIOCREADSUBCHANNEL
  get sub-channel information on current status of disc playing
CDIOCREADTOCHEADER get table of contents header
CDIOCREADTOCENTRYS gets all of the table of contents
CDIOCPLAYTRACKS begins audio playing at location specified
CDIOCPLAYBLOCKS fails with error EINVAL
CDIOCPLAYMSF begins audio playing at location specified
CDIOCRESUME resumes playing a previously paused disc
CDIOCPAUSE pauses a playing disc
CDIOCSTART begins playing a disc
CDIOCSTOP stops a previously playing disc
CDIOCEJECT opens the disc tray (there is no support for a corresponding un-eject command).
CDIOCRESET stops any play and resets the Mitsumi controller board
CDIOCSETDEBUG cause the kernel to print debug messages to the console about the mcd driver
CDIOCCLRDEBUG cause the kernel to quit printing debug messages about the mcd driver

The ioctl commands defined above are the only ones that the mcd driver supports. There are other CD-ROM related ioctl commands (such as CDIOCSETVOL and CDIOCSETSTERIO) which are available and may be supported by future versions of the driver.

FILES

/dev/(r)mcd0a
  accesses BSD partition on the disc. Normally, there is only one file system on a CD-ROM disc.
/dev/(r)mcd0c
  accesses raw device.

NOTES

The character-mode devices for the mcd driver should only be used for accessing the audio features of the CD-ROM player as the performance on data is abysmal.

The current version of the driver uses neither the DMA or IRQ features of the interface board, although it has an interrupt handler for any IRQ requests that are generated. Until the DMA features are supported, the only interrupts that the board generates are those that are not supported by the driver anyway.

SEE ALSO


.In sys/cdio.h

HISTORY

An mcd driver appeared in
.Fx 1.0 .

AUTHORS


.An -nosplit The driver was written by
.An Holger Veit (data part) and
.An Brian Moore (audio part). Changes were provided by
.An Gary Clark II ,
.An Andrew A. Chernov , and
.An Jordan K. Hubbard .
Search for    or go to Top of page |  Section 4 |  Main Index


Powered by GSP Visit the GSP FreeBSD Man Page Interface.
Output converted with manServer 1.07.