Quick Navigator

Search Site

Unix VPS
A - Starter
B - Basic
C - Preferred
D - Commercial
MPS - Dedicated
Previous VPSs
* Sign Up! *

Contact Us
Online Help
Domain Status
Man Pages

Virtual Servers

Topology Map

Server Agreement
Year 2038

USA Flag



Man Pages

Manual Reference Pages  -  GRAPHVIZ (3)

.ds Aq ’


GraphViz - Interface to AT&T’s GraphViz. Deprecated. See GraphViz2



  use GraphViz;

  my $g = GraphViz->new();

  $g->add_node(Paris, label => City of\nlurve);
  $g->add_node(New York);

  $g->add_edge(London => Paris);
  $g->add_edge(London => New York, label => Far);
  $g->add_edge(Paris => London);

  print $g->as_png;


This module provides an interface to layout and image generation of directed and undirected graphs in a variety of formats (PostScript, PNG, etc.) using the dot, neato, twopi, circo and fdp programs from the Graphviz project ( or

GraphViz is deprecated in favour of GraphViz2.


Of course you need to install AT&T’s Graphviz before using this module. See <>.

You are strongly advised to download the stable version of Graphviz, because the development snapshots (click on ’Source code’), are sometimes non-functional.

Install GraphViz as you would for any Perl module:


        cpanm GraphViz

        Note: cpanm ships in App::cpanminus. See also App::perlbrew.

or run:

        sudo cpan GraphViz

or unpack the distro, and then either:

        perl Build.PL
        ./Build test
        sudo ./Build install


        perl Makefile.PL
        make (or dmake or nmake)
        make test
        make install


    Modules in this distro

o GraphViz
o GraphViz::No
o GraphViz::Small
o GraphViz::Regex
o GraphViz::XML
o GraphViz::Data::Grapher
o GraphViz::Parse::RecDescent
o GraphViz::Parse::Yacc
o GraphViz::Parse::Yapp

    What is a graph?

A (undirected) graph is a collection of nodes linked together with edges.

A directed graph is the same as a graph, but the edges have a direction.

    What is GraphViz?

This module is an interface to the GraphViz toolset ( The GraphViz tools provide automatic graph layout and drawing. This module simplifies the creation of graphs and hides some of the complexity of the GraphViz module.

Laying out graphs in an aesthetically-pleasing way is a hard problem - there may be multiple ways to lay out the same graph, each with their own quirks. GraphViz luckily takes part of this hard problem and does a pretty good job in a couple of seconds for most graphs.

    Why should I use this module?

Observation aids comprehension. That is a fancy way of expressing that popular faux-Chinese proverb: a picture is worth a thousand words.

Text is not always the best way to represent anything and everything to do with a computer programs. Pictures and images are easier to assimilate than text. The ability to show a particular thing graphically can aid a great deal in comprehending what that thing really represents.

Diagrams are computationally efficient, because information can be indexed by location; they group related information in the same area. They also allow relations to be expressed between elements without labeling the elements.

A friend of mine used this to his advantage when trying to remember important dates in computer history. Instead of sitting down and trying to remember everything, he printed over a hundred posters (each with a date and event) and plastered these throughout his house. His spatial memory is still so good that asked last week (more than a year since the experiment) when Lisp was invented, he replied that it was upstairs, around the corner from the toilet, so must have been around 1958.

Spreadsheets are also a wonderfully simple graphical representation of computational models.


Bundled with this module are several modules to help graph data structures (GraphViz::Data::Dumper), XML (GraphViz::XML), and Parse::RecDescent, Parse::Yapp, and yacc grammars (GraphViz::Parse::RecDescent, GraphViz::Parse::Yapp, and GraphViz::Parse::Yacc).

Note that Marcel Grunauer has released some modules on CPAN to graph various other structures. See GraphViz::DBI and GraphViz::ISA for example.

brian d foy has written an article about Devel::GraphVizProf for Dr. Dobb’s Journal:

    Award winning!

I presented a paper and talk on Graphing Perl using GraphViz at the 3rd German Perl Workshop and received the Best Knowledge Transfer prize.




This is the constructor. It accepts several attributes.

  my $g = GraphViz->new();
  my $g = GraphViz->new(directed => 0);
  my $g = GraphViz->new(layout => neato, ratio => compress);
  my $g = GraphViz->new(rankdir  => BT);
  my $g = GraphViz->new(width => 8.5, height => 11);
  my $g = GraphViz->new(width => 30, height => 20,
                        pagewidth => 8.5, pageheight => 11);

The most two important attributes are ’layout’ and ’directed’.
layout The ’layout’ attribute determines which layout algorithm will use. Possible values are:
dot The default GraphViz layout for directed graph layouts
neato For undirected graph layouts - spring model
twopi For undirected graph layouts - radial
circo For undirected graph layouts - circular
fdp For undirected graph layouts - force directed spring model
directed The ’directed’ attribute, which defaults to 1 (true) specifies directed (edges have arrows) graphs. Setting this to zero produces undirected graphs (edges do not have arrows).
rankdir Another attribute ’rankdir’ controls the direction in which the nodes are linked together. The default is ’TB’ (arrows from top to bottom). Other legal values are ’BT’ (bottom->top), ’LR’ (left->right) and ’RL’ (right->left).
width, height The ’width’ and ’height’ attributes control the size of the bounding box of the drawing in inches. This is more useful for PostScript output as for raster graphic (such as PNG) the pixel dimensions can not be set, although there are generally 96 pixels per inch.
pagewidth, pageheight The ’pagewidth’ and ’pageheight’ attributes set the PostScript pagination size in inches. That is, if the image is larger than the page then the resulting PostScript image is a sequence of pages that can be tiled or assembled into a mosaic of the full image. (This only works for PostScript output).
concentrate The ’concentrate’ attribute controls enables an edge merging technique to reduce clutter in dense layouts of directed graphs. The default is not to merge edges.
orientation This option controls the angle, in degrees, used to rotate polygon node shapes.
random_start For undirected graphs, the ’random_start’ attribute requests an initial random placement for the graph, which may give a better result. The default is not random.
epsilon For undirected graphs, the ’epsilon’ attribute decides how long the graph solver tries before finding a graph layout. Lower numbers allow the solver to fun longer and potentially give a better layout. Larger values can decrease the running time but with a reduction in layout quality. The default is 0.1.
overlap The ’overlap’ option allows you to set layout behavior for graph nodes that overlap. (From GraphViz documentation:)

Determines if and how node overlaps should be removed.
true (the default) overlaps are retained.
scale overlaps are removed by uniformly scaling in x and y.
false If the value converts to false, node overlaps are removed by a Voronoi-based technique.
scalexy x and y are separately scaled to remove overlaps.
orthoxy, orthxy If the value is orthoxy or orthoyx, overlaps are moved by optimizing two constraint problems, one for the x axis and one for the y. The suffix indicates which axis is processed first.

<B>NOTEB>: The methods related to orthoxy and orthoyx are still evolving. The semantics of these may change, or these methods may disappear altogether.

compress If the value is compress, the layout will be scaled down as much as possible without introducing any overlaps.

Except for the Voronoi method, all of these transforms preserve the orthogonal ordering of the original layout. That is, if the x coordinates of two nodes are originally the same, they will remain the same, and if the x coordinate of one node is originally less than the x coordinate of another, this relation will still hold in the transformed layout. The similar properties hold for the y coordinates.

no_overlap The ’no_overlap’ overlap option, if set, tells the graph solver to not overlap the nodes. Deprecated, Use ’overlap’ => ’false’.
ratio The ’ratio’ option sets the aspect ratio (drawing height/drawing width) for the drawing. Note that this is adjusted before the size attribute constraints are enforced. Default value is fill.
numeric If ratio is numeric, it is taken as the desired aspect ratio. Then, if the actual aspect ratio is less than the desired ratio, the drawing height is scaled up to achieve the desired ratio; if the actual ratio is greater than that desired ratio, the drawing width is scaled up.
fill If ratio = fill and the size attribute is set, node positions are scaled, separately in both x and y, so that the final drawing exactly fills the specified size.
compress If ratio = compress and the size attribute is set, dot attempts to compress the initial layout to fit in the given size. This achieves a tighter packing of nodes but reduces the balance and symmetry. This feature only works in dot.
expand If ratio = expand the size attribute is set, and both the width and the height of the graph are less than the value in size, node positions are scaled uniformly until at least one dimension fits size exactly. Note that this is distinct from using size as the desired size, as here the drawing is expanded before edges are generated and all node and text sizes remain unchanged.
auto If ratio = auto the page attribute is set and the graph cannot be drawn on a single page, then size is set to an ‘‘ideal’’ value. In particular, the size in a given dimension will be the smallest integral multiple of the page size in that dimension which is at least half the current size. The two dimensions are then scaled independently to the new size. This feature only works in dot.
bgcolor The ’bgcolor’ option sets the background colour. A colour value may be h,s,v (hue, saturation, brightness) floating point numbers between 0 and 1, or an X11 color name such as ’white’, ’black’, ’red’, ’green’, ’blue’, ’yellow’, ’magenta’, ’cyan’, or ’burlywood’.
name The ’name’ option sets name of the graph. This option is useful in few situations, like client side image map generation, see cmapx. By default ’test’ is used.
node,edge,graph The ’node’, ’edge’ and ’graph’ attributes allow you to specify global node, edge and graph attributes (in addition to those controlled by the special attributes described above). The value should be a hash reference containing the corresponding key-value pairs. For example, to make all nodes box-shaped (unless explicity given another shape):

  my $g = GraphViz->new(node => {shape => box});


A graph consists of at least one node. All nodes have a name attached which uniquely represents that node.

The add_node method creates a new node and optionally assigns it attributes.

The simplest form is used when no attributes are required, in which the string represents the name of the node:


Various attributes are possible: label provides a label for the node (the label defaults to the name if none is specified). The label can contain embedded newlines with ’\n’, as well as ’\c’, ’\l’, ’\r’ for center, left, and right justified lines:

  $g->add_node(Paris, label => City of\nlurve);

Attributes need not all be specified in the one line: successive declarations of the same node have a cumulative effect, in that any later attributes are just added to the existing ones. For example, the following two lines are equivalent to the one above:

  $g->add_node(Paris, label => City of\nlurve);

Note that multiple attributes can be specified. Other attributes include:
height, width sets the minimum height or width
shape sets the node shape. This can be one of: ’record’, ’plaintext’, ’ellipse’, ’circle’, ’egg’, ’triangle’, ’box’, ’diamond’, ’trapezium’, ’parallelogram’, ’house’, ’hexagon’, ’octagon’
fontsize sets the label size in points
fontname sets the label font family name
color sets the outline colour, and the default fill colour if the ’style’ is ’filled’ and ’fillcolor’ is not specified

A colour value may be h,s,v (hue, saturation, brightness) floating point numbers between 0 and 1, or an X11 color name such as ’white’, ’black’, ’red’, ’green’, ’blue’, ’yellow’, ’magenta’, ’cyan’, or ’burlywood’

fillcolor sets the fill colour when the style is ’filled’. If not specified, the ’fillcolor’ when the ’style’ is ’filled’ defaults to be the same as the outline color
style sets the style of the node. Can be one of: ’filled’, ’solid’, ’dashed’, ’dotted’, ’bold’, ’invis’
URL sets the url for the node in image map and PostScript files. The string ’\N’ value will be replaced by the node name. In PostScript files, URL information is embedded in such a way that Acrobat Distiller creates PDF files with active hyperlinks
If you wish to add an anonymous node, that is a node for which you do not wish to generate a name, you may use the following form, where the GraphViz module generates a name and returns it for you. You may then use this name later on to refer to this node:

  my $nodename = $g->add_node(label => Roman city);

Nodes can be clustered together with the cluster attribute, which is drawn by having a labelled rectangle around all the nodes in a cluster. An empty string means not clustered.

  $g->add_node(London, cluster => Europe);
  $g->add_node(Amsterdam, cluster => Europe);

Clusters can also take a hashref so that you can set attributes:

  my $eurocluster = {
    name      =>Europe,
    style     =>filled,
    fillcolor =>lightgray,
    fontname  =>arial,
    fontsize  =>12,
  $g->add_node(London, cluster => $eurocluster, @default_attrs);

Nodes can be located in the same rank (that is, at the same level in the graph) with the rank attribute. Nodes with the same rank value are ranked together.

  $g->add_node(Paris, rank => top);
  $g->add_node(Boston, rank => top);

Also, nodes can consist of multiple parts (known as ports). This is implemented by passing an array reference as the label, and the parts are displayed as a label. GraphViz has a much more complete port system, this is just a simple interface to it. See the ’from_port’ and ’to_port’ attributes of add_edge:

  $g->add_node(London, label => [Heathrow, Gatwick]);


Edges are directed (or undirected) links between nodes. This method creates a new edge between two nodes and optionally assigns it attributes.

The simplest form is when now attributes are required, in which case the nodes from and to which the edge should be are specified. This works well visually in the program code:

  $g->add_edge(London => Paris);

Attributes such as ’label’ can also be used. This specifies a label for the edge. The label can contain embedded newlines with ’\n’, as well as ’\c’, ’\l’, ’\r’ for center, left, and right justified lines.

  $g->add_edge(London => New York, label => Far);

Note that multiple attributes can be specified. Other attributes include:
minlen sets an integer factor that applies to the edge length (ranks for normal edges, or minimum node separation for flat edges)
weight sets the integer cost of the edge. Values greater than 1 tend to shorten the edge. Weight 0 flat edges are ignored for ordering nodes
fontsize sets the label type size in points
fontname sets the label font family name
fontcolor sets the label text colour
color sets the line colour for the edge

A colour value may be h,s,v (hue, saturation, brightness) floating point numbers between 0 and 1, or an X11 color name such as ’white’, ’black’, ’red’, ’green’, ’blue’, ’yellow’, ’magenta’, ’cyan’, or ’burlywood’

style sets the style of the node. Can be one of: ’filled’, ’solid’, ’dashed’, ’dotted’, ’bold’, ’invis’
dir sets the arrow direction. Can be one of: ’forward’, ’back’, ’both’, ’none’
tailclip, headclip when set to false disables endpoint shape clipping
arrowhead, arrowtail sets the type for the arrow head or tail. Can be one of: ’none’, ’normal’, ’inv’, ’dot’, ’odot’, ’invdot’, ’invodot.’
arrowsize sets the arrow size: (norm_length=10,norm_width=5, inv_length=6,inv_width=7,dot_radius=2)
headlabel, taillabel sets the text for port labels. Note that labelfontcolor, labelfontname, labelfontsize are also allowed
labeldistance, port_label_distance sets the distance from the edge / port to the label. Also labelangle
decorate if set, draws a line from the edge to the label
samehead, sametail if set aim edges having the same value to the same port, using the average landing point
constraint if set to false causes an edge to be ignored for rank assignment
Additionally, adding edges between ports of a node is done via the ’from_port’ and ’to_port’ parameters, which currently takes in the offset of the port (ie 0, 1, 2...).

  $g->add_edge(London => Paris, from_port => 0);

    as_canon, as_text, as_gif etc. methods

There are a number of methods which generate input for dot / neato / twopi / circo / fdp or output the graph in a variety of formats.

Note that if you pass a filename, the data is written to that filename. If you pass a filehandle, the data will be streamed to the filehandle. If you pass a scalar reference, then the data will be stored in that scalar. If you pass it a code reference, then it is called with the data (note that the coderef may be called multiple times if the image is large). Otherwise, the data is returned:

<B>Win32 Note:B> you will probably want to binmode any filehandles you write the output to if you want your application to be portable to Win32.

  my $png_image = $g->as_png;
  # or
  $g->as_png("pretty.png"); # save image
  # or
  $g->as_png(\*STDOUT); # stream image to a filehandle
  # or
  #g->as_png(\$text); # save data in a scalar
  # or
  $g->as_png(sub { $png_image .= shift });

as_debug The as_debug method returns the dot file which we pass to GraphViz. It does not lay out the graph. This is mostly useful for debugging.

  print $g->as_debug;

as_canon The as_canon method returns the canonical dot / neato / twopi / circo / fdp file which corresponds to the graph. It does not layout the graph - every other as_* method does.

  print $g->as_canon;

  # prints out something like:
  digraph test {
      node [    label = "\N" ];
      London [label=London];
      Paris [label="City of\nlurve"];
      New_York [label="New York"];
      London -> Paris;
      London -> New_York [label=Far];
      Paris -> London;

as_text The as_text method returns text which is a layed-out dot / neato / twopi / circo / fdp format file.

  print $g->as_text;

  # prints out something like:
  digraph test {
      node [    label = "\N" ];
      graph [bb= "0,0,162,134"];
      London [label=London, pos="33,116", width="0.89", height="0.50"];
      Paris [label="City of\nlurve", pos="33,23", width="0.92", height="0.62"];
      New_York [label="New York", pos="123,23", width="1.08", height="0.50"];
      London -> Paris [pos="e,27,45 28,98 26,86 26,70 27,55"];
      London -> New_York [label=Far, pos="e,107,40 49,100 63,85 84,63 101,46", lp="99,72"];
      Paris -> London [pos="s,38,98 39,92 40,78 40,60 39,45"];

as_ps Returns a string which contains a layed-out PostScript-format file.

  print $g->as_ps;

as_hpgl Returns a string which contains a layed-out HP pen plotter-format file.

  print $g->as_hpgl;

as_pcl Returns a string which contains a layed-out Laserjet printer-format file.

  print $g->as_pcl;

as_mif Returns a string which contains a layed-out FrameMaker graphics-format file.

  print $g->as_mif;

as_pic Returns a string which contains a layed-out PIC-format file.

  print $g->as_pic;

as_gd Returns a string which contains a layed-out GD-format file.

  print $g->as_gd;

as_gd2 Returns a string which contains a layed-out GD2-format file.

  print $g->as_gd2;

as_gif Returns a string which contains a layed-out GIF-format file.

  print $g->as_gif;

as_jpeg Returns a string which contains a layed-out JPEG-format file.

  print $g->as_jpeg;

as_png Returns a string which contains a layed-out PNG-format file.

  print $g->as_png;
  $g->as_png("pretty.png"); # save image

as_wbmp Returns a string which contains a layed-out Windows BMP-format file.

  print $g->as_wbmp;

as_cmap (deprecated) Returns a string which contains a layed-out HTML client-side image map format file. Use as_cmapx instead.

  print $g->as_cmap;

as_cmapx Returns a string which contains a layed-out HTML HTML/X client-side image map format file. Name and id attributes of map element are set to name of the graph.

  print $g->as_cmapx;

as_ismap (deprecated) Returns a string which contains a layed-out old-style server-side image map format file. Use as_imap instead.

  print $g->as_ismap;

as_imap Returns a string which contains a layed-out HTML new-style server-side image map format file.

  print $g->as_imap;

as_vdx Returns a string which contains a VDX-format (Microsoft Visio) file.

  print $g->as_vdx;

as_vrml Returns a string which contains a layed-out VRML-format file.

  print $g->as_vrml;

as_vtx Returns a string which contains a layed-out VTX (Visual Thought) format file.

  print $g->as_vtx;

as_mp Returns a string which contains a layed-out MetaPost-format file.

  print $g->as_mp;

as_fig Returns a string which contains a layed-out FIG-format file.

  print $g->as_fig;

as_svg Returns a string which contains a layed-out SVG-format file.

  print $g->as_svg;

as_svgz Returns a string which contains a layed-out SVG-format file that is compressed.

  print $g->as_svgz;

as_plain Returns a string which contains a layed-out simple-format file.

  print $g->as_plain;


    Why do I get error messages like the following?

        Error: <stdin>:1: syntax error near line 1
        context: digraph >>>  Graph <<<  {

Graphviz reserves some words as keywords, meaning they can’t be used as an ID, e.g. for the name of the graph. So, don’t do this:

        strict graph graph{...}
        strict graph Graph{...}
        strict graph strict{...}

Likewise for non-strict graphs, and digraphs. You can however add double-quotes around such reserved words:

        strict graph "graph"{...}

Even better, use a more meaningful name for your graph...

The keywords are: node, edge, graph, digraph, subgraph and strict. Compass points are not keywords.

See keywords <> in the discussion of the syntax of DOT for details.


Older versions of GraphViz used a slightly different syntax for node and edge adding (with hash references). The new format is slightly clearer, although for the moment we support both. Use the new, clear syntax, please.


GraphViz is deprecated in favour of GraphViz2.

Machine-Readable Change Log

The file Changes was converted into Changelog.ini by Module::Metadata::Changes.


Leon Brocard: <>.

Current maintainer: Ron Savage <>.


Copyright (C) 2000-4, Leon Brocard


This module is free software; you can redistribute it or modify it under the same terms as Perl itself.
Search for    or go to Top of page |  Section 3 |  Main Index

perl v5.20.3 GRAPHVIZ (3) 2015-12-28

Powered by GSP Visit the GSP FreeBSD Man Page Interface.
Output converted with manServer 1.07.