Constructors

$obj->close()

Terminate the dispatcher activities. The dispatcher gets disabled, to avoid the case that it is accidentally used. Returns "undef" (false) if the dispatcher was already closed.

Log::Report::Dispatcher->new($type, $name, %options)

Create a dispatcher. The $type of back-end to start is required, and listed in the "DESCRIPTION" part of this manual-page. For various external back-ends, special wrappers are created.

The $name must be uniquely identifying this dispatcher. When a second dispatcher is created (via Log::Report::dispatcher()) with the name of an existing dispatcher, the existing one will get replaced.

All %options which are not consumed by this base constructor are passed to the wrapped back-end. Some of them will check whether all %options are understood, other ignore unknown %options.

 -Option       --Default
  accept         depend on mode
  charset        <undef>
  format_reason  'LOWERCASE'
  locale         <system locale>
  mode           'NORMAL'
    

Accessors

$obj->isDisabled()

$obj->mode()

Returns the mode in use for the dispatcher as number. See new(mode) and "Run modes" in Log::Report.

$obj->name()

Returns the unique name of this dispatcher.

$obj->needs( [$reason] )

Returns the list with all REASONS which are needed to fulfill this dispatcher's needs. When disabled, the list is empty, but not forgotten.

[0.999] when only one $reason is specified, it is returned if in the list.

$obj->type()

The dispatcher $type, which is usually the same as the class of this object, but not in case of wrappers like for Log::Dispatch.

Logging

$obj->addSkipStack(@CODE)

Log::Report::Dispatcher->addSkipStack(@CODE)

[1.13] Add one or more CODE blocks of caller lines which should not be collected for stack-traces or location display. A CODE gets called with an ARRAY of caller information, and returns true when that line should get skipped.

Warning: this logic is applied globally: on all dispatchers.

example:

By default, all lines in the Log::Report packages are skipped from display, with a simple CODE as this:

  sub in_lr { $_[0][0] =~ m/^Log\:\:Report(?:\:\:|$)/ }
  Log::Report::Dispatcher->addSkipStack(\&in_lr);
    

The only parameter to in_lr is the return of caller(). The first element of that ARRAY is the package name of a stack line.

$obj->collectLocation()

Log::Report::Dispatcher->collectLocation()

Collect the information to be displayed as line where the error occurred.

$obj->collectStack( [$maxdepth] )

Log::Report::Dispatcher->collectStack( [$maxdepth] )

Returns an ARRAY of ARRAYs with text, filename, line-number.

$obj->log(HASH-$of-%options, $reason, $message, $domain)

This method is called by Log::Report::report() and should not be called directly. Internally, it will call translate(), which does most $of the work.

$obj->skipStack()

[1.13] Returns the number of nestings in the stack which should be skipped to get outside the Log::Report (and related) modules. The end-user does not want to see those internals in stack-traces.

$obj->stackTraceLine(%options)

Log::Report::Dispatcher->stackTraceLine(%options)

 -Option    --Default
  abstract    1
  call        <required>
  filename    <required>
  linenr      <required>
  max_line    undef
  max_params  8
  package     <required>
  params      <required>
    

$obj->translate(HASH-$of-%options, $reason, $message)

See "Processing the message", which describes the actions taken by this method. A string is returned, which ends on a new-line, and may be multi-line (in case a stack trace is produced).

Available back-ends

Log::Report::Dispatcher::Perl (abbreviation 'PERL')

Use Perl's own "print()", "warn()" and "die()" to ventilate reports. This is the default dispatcher.

Log::Report::Dispatcher::File (abbreviation 'FILE')

Logs the message into a file, which can either be opened by the class or be opened before the dispatcher is created.

Log::Report::Dispatcher::Syslog (abbreviation 'SYSLOG')

Send messages into the system's syslog infrastructure, using Sys::Syslog.

Log::Report::Dispatcher::Callback (abbreviation 'CALLBACK')

Calls any CODE reference on receipt of each selected message, for instance to send important message as email or SMS.

"Log::Dispatch::*"

All of the Log::Dispatch::Output extensions can be used directly. The Log::Report::Dispatcher::LogDispatch will wrap around that back-end.

"Log::Log4perl"

Use the Log::Log4perl main object to write to dispatchers. This infrastructure uses a configuration file.

Log::Report::Dispatcher::Try (abbreviation 'TRY')

Used by function Log::Report::try(). It collects the exceptions and can produce them on request.

Processing the message

The modules which use "Log::Report" will only specify the base of the message string. The base dispatcher and the back-ends will extend this message with additional information:

. the reason

. the filename/line-number where the problem appeared

. the filename/line-number where it problem was reported

. the error text in $!

. a stack-trace

. a trailing new-line

When the message is a translatable object (Log::Report::Message, for instance created with Log::Report::__()), then the added components will get translated as well. Otherwise, all will be in English.

Exactly what will be added depends on the actual mode of the dispatcher (change it with mode(), initiate it with new(mode)).

                        mode mode mode mode
 REASON   SOURCE   TE!  NORM VERB ASSE DEBUG
 trace    program  ...                 S
 assert   program  ...            SL   SL
 info     program  T..       S    S    S
 notice   program  T..  S    S    S    S
 mistake  user     T..  S    S    S    SL
 warning  program  T..  S    S    SL   SL
 error    user     TE.  S    S    SL   SC
 fault    system   TE!  S    S    SL   SC
 alert    system   T.!  SL   SL   SC   SC
 failure  system   TE!  SL   SL   SC   SC
 panic    program  .E.  SC   SC   SC   SC

 T - usually translated
 E - exception (execution interrupted)
 ! - will include $! text at display
 L - include filename and linenumber
 S - show/print when accepted
 C - stack trace (like Carp::confess())

Filters

With a filter, you can block or modify specific messages before translation. There may be a wish to change the REASON of a report or its content. It is not possible to avoid the exit which is related to the original message, because a module's flow depends on it to happen.

When there are filters defined, they will be called in order of definition. For each of the dispatchers which are called for a certain REASON (which "accept" that REASON), it is checked whether its name is listed for the filter (when no names where specified, then the filter is applied to all dispatchers).

When selected, the filter's CODE reference is called with four arguments: the dispatcher object (a Log::Report::Dispatcher), the HASH-of-OPTIONS passed as optional first argument to Log::Report::report(), the REASON, and the MESSAGE. Returned is the new REASON and MESSAGE. When the returned REASON is "undef", then the message will be ignored for that dispatcher.

Be warned about processing the MESSAGE: it is a Log::Report::Message object which may have a "prepend" string and "append" string or object. When the call to Log::Report::report() contained multiple comma-separated components, these will already have been joined together using concatenation (see Log::Report::Message::concat().

. Example: a filter on syslog

 dispatcher filter => \&myfilter, 'syslog';

 # ignore all translatable and non-translatable messages containing
 # the word "skip"
 sub myfilter($$$$)
 {   my ($disp, $opts, $reason, $message) = @_;
     return () if $message->untranslated =~ m/\bskip\b/;
     ($reason, $message);
 }

. Example: take all mistakes and warnings serious

 dispatch filter => \&take_warns_seriously;
 sub take_warns_seriously($$$$)
 {   my ($disp, $opts, $reason, $message) = @_;
       $reason eq 'MISTAKE' ? (ERROR   => $message)
     : $reason eq 'WARNING' ? (FAULT   => $message)
     :                        ($reason => $message);
 }