NAME

mode2, smode2, xmode2 - shows the pulse/space length of infrared signals

SYNOPSIS

xmode2 [options]

DESCRIPTION

The main purpose of these programs is to check operation of your home-brew LIRC receiver hardware and to see the IR waveform of the remote controller without an expensive oscilloscope. Very useful for debugging. Of course this program won't work with hardware that decodes the signals itself like e.g. TV cards or the Irman.

xmode2 is based on smode2 by Sinkovics Zoltan. It is just a conversion from svga to X with some basic support for resizing. The only differences are that the --mode option enables an alternative display mode and that xmode2 can read and visualise mode2 output from stdin.

-h --help

display usage summary

-v --version

display version

-d --device=device

read from given device

-H --driver=driver

use given driver

-g --geometry=geometry window geometry

-t --timediv=value

ms per unit

-m --mode

enable alternative display mode

-r --raw

access device directly

SEE ALSO

mode2(1), smode2(1), xmode2(1)

The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.