NAME

nvme-resv-release - Release an nvme reservation

SYNOPSIS

nvme resv-release <device> [--namespace-id=<nsid> | -n <nsid>]


                        [--crkey=<crkey> | -c <crkey>]


                        [--rtype=<rtype> | -t <rtype>]


                        [--rrela=<rrela> | -a <rrela>] [--iekey | -i]


                        [--output-format=<fmt> | -o <fmt>] [--verbose | -v]


                        [--timeout=<timeout>]

DESCRIPTION

The Reservation Release command is used to release or clear a reservation held on a namespace.

OPTIONS

-n <nsid>, --namespace-id=<nsid>

Override the nsid field. If using the admin character device, this parameter is required.

-c <crkey>, --crkey=<crkey>

Current Reservation Key: If the Reservation Register Action is 001b (i.e., Unregister Reservation Key) or 010b (i.e., Replace Reservation Key), then this field contains the current reservation key associated with the host. For all other Reservation Register Action values, this field is reserved. The controller ignores the value of this field when the Ignore Existing Key (IEKEY) bit is set to ‘1’.

-t <rtype>, --rtype=<rtype>

Reservation Type: This field specifies the type of reservation to be created.

Value	Definition
0h	Reserved
1h	Write Exclusive Reservation
2h	Exclusive Access Reservation
3h	Write Exclusive - Registrants Only Reservation
4h	Exclusive Access - Registrants Only Reservation
5h	Write Exclusive - All Registrants Reservation
6h	Exclusive Access - All Registrants Reservation
07h-FFh	Reserved

-a <rrela>, --rrela=<rrela>

Reservation Release Action: This field specifies the registration action that is performed by the command.

Value	Definition
0	Release
1	Clear
2-7	Reserved

-i, --iekey

Ignore Existing Key: If this bit is set to a 1, then the Current Reservation Key (CRKEY) check is disabled and the command shall succeed regardless of the CRKEY field value.

Indicator option, defaults to 0.

-o <fmt>, --output-format=<fmt>

Set the reporting format to normal, json or binary. Only one output format can be used at a time.

-v, --verbose

Increase the information detail in the output.

--timeout=<timeout>

Override default timeout value. In milliseconds.

EXAMPLES

No examples yet

NVME

Part of the nvme-user suite