Fetch Structure

The structure defines which modules to display and in what order. It consists of module names separated by colons (:). For example: title:separator:os:kernel:uptime

To list all available modules, use --list-modules

Config Files

Fastfetch uses JSONC (JSON with Comments) for configuration files. These files must have the .jsonc extension.

You can generate a default config file using --gen-config. By default, the config file is saved at ~/.config/fastfetch/config.jsonc.

The configuration/preset files are searched in the following locations (in order):

1. Relative to the current working directory

2. Relative to ~/.local/share/fastfetch/presets/

3. Relative to /usr/share/fastfetch/presets/

For detailed information on logo options, module configuration, and formatting, visit: https://github.com/fastfetch-cli/fastfetch/wiki/Configuration

Fastfetch provides several built-in presets. List them with --list-presets.

JSON Schema

A JSON schema is available for editor intelligence when editing the configuration file. Add the following line at the beginning of your config file:

"$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json"

Informative

-h, --help [command]

Display this help message or help for a specific command

-v, --version

Show the full version of fastfetch

--version-raw

Display the raw version string (major.minor.patch)

--list-config-paths

List search paths for config files

--list-data-paths

List search paths for presets and logos

--list-logos

List available logos

--list-modules

List available modules

--list-presets

List presets that fastfetch knows about

Presets can be loaded with "--config <preset-name>"

--list-features

List the supported features that fastfetch was compiled with

Mainly for development

--print-logos

Display available logos

--print-structure

Display the default structure

--format enum

Set output format

-j, --json [bool]

Enable or disable JSON output

Shortcut for `--format json`

--dynamic-interval num

Keep fastfetch open and update the output every <num> milliseconds

0 (default) to disable the behavior; don't work with --json

Config

-c, --config config

Specify the config file or preset to load

The file will be searched according to the order shown by "fastfetch --list-config-paths". Use "-" to read config from stdin or "none" to disable further config loading. See also https://github.com/fastfetch-cli/fastfetch/wiki/Configuration for more info

--gen-config [path]

Generate a minimal config file at the specified path

Defaults to "~/.config/fastfetch/config.jsonc". Will print the generated config if <path> is "-"

--gen-config-full [path]

Generate a full config file with all optional options at the specified path

Defaults to "~/.config/fastfetch/config.jsonc". Will print the generated config if <path> is "-"

--gen-config-force [path]

Generate a config file at the specified path, overwriting any existing file

Defaults to "~/.config/fastfetch/config.jsonc"

General

--thread [bool]

Use separate threads for HTTP requests

--wmi-timeout num

Set the timeout (ms) for WMI queries

Windows only

--processing-timeout num

Set the timeout (ms) when waiting for child processes

--ds-force-drm [enum]

Specify whether only DRM should be used to detect displays

Use this option if you encounter problems with other detection methods.
Linux only

--detect-version [bool]

Specify whether to detect and display versions of terminal, shell, editor, and others

Mainly for benchmarking

Logo

-l, --logo logo

Set the logo source. Use "none" to disable the logo

Should be the name of a built-in logo or a path to an image file. See also https://github.com/fastfetch-cli/fastfetch/wiki/Logo-options

--logo-type enum

Set the type of the logo specified in "--logo"

See also https://github.com/fastfetch-cli/fastfetch/wiki/Logo-options

--logo-width num

Set the width of the logo (in characters) if it is an image

Required for iTerm image protocol

--logo-height num

Set the height of the logo (in characters) if it is an image

Required for iTerm image protocol

--logo-preserve-aspect-ratio [bool]

Specify whether the logo should fill the specified width and height as much as possible without stretching

Supported by iTerm image protocol only

--logo-color-[1-9] color

Override a color in the logo

See `-h color` for the list of available colors

--logo-padding num

Set the padding on the left and right sides of the logo

--logo-padding-left num

Set the padding on the left side of the logo

--logo-padding-right num

Set the padding on the right side of the logo

--logo-padding-top num

Set the padding at the top of the logo

--logo-print-remaining [bool]

Specify whether to print the remaining logo if it has more lines than modules to display

--logo-position enum

Set the position where the logo should be displayed

--logo-recache [bool]

If true, regenerate the image logo cache

--file path

Short for --logo-type file --logo <path>

See "--help logo-type" for more info

--file-raw path

Short for --logo-type file-raw --logo <path>

See "--help logo-type" for more info

--data data

Short for --logo-type data --logo <data>

See "--help logo-type" for more info

--data-raw data

Short for --logo-type data-raw --logo <data>

See "--help logo-type" for more info

--raw path

Short for --logo-type raw --logo <path>

See "--help logo-type" for more info

--sixel path

Short for --logo-type sixel --logo <path>

See "--help logo-type" for more info

--kitty path

Short for --logo-type kitty --logo <path>

See "--help logo-type" for more info

--kitty-direct path

Short for --logo-type kitty-direct --logo <path>

See "--help logo-type" for more info

--kitty-icat path

Short for --logo-type kitty-icat --logo <path>

See "--help logo-type" for more info

--iterm path

Short for --logo-type iterm --logo <path>

See "--help logo-type" for more info

--chafa path

Short for --logo-type chafa --logo <path>

See "--help logo-type" for more info

--chafa-fg-only [bool]

Produce character-cell output using foreground colors only

See chafa document for detail

--chafa-symbols str

Specify character symbols to employ in final output

See chafa document for detail

--chafa-canvas-mode enum

Determine how colors are used in the output

This value maps the int value of enum ChafaCanvasMode. See chafa document for detail

--chafa-color-space enum

Set color space used for quantization

This value maps the int value of enum ChafaColorSpace. See chafa document for detail

--chafa-dither-mode enum

Set output dither mode (No effect with 24-bit color)

This value maps the int value of enum ChafaDitherMode. See chafa document for detail

Display

-s, --structure structure

Set the structure of the fetch

Must be a colon-separated list of keys. Use "fastfetch --list-modules" to see available options

--structure-disabled structure

Disable specific modules in the structure

Must be a colon-separated list of keys

--stat [bool]

Show time usage (in ms) for individual modules

--pipe [bool]

Disable colors

Auto-detected based on isatty(1) by default

--color color

Set the color of both keys and title

Shortcut for "--color-keys <color>" and "--color-title <color>"
For color syntax, see <https://github.com/fastfetch-cli/fastfetch/wiki/Color-Format-Specification>

--color-keys color

Set the color of the keys

Doesn't affect Title, Separator, and Colors modules. See `-h color` for the list of available colors

--color-title color

Set the color of the title

See `-h color` for the list of available colors

--color-output color

Set the color of module output

See `-h color` for the list of available colors

--color-separator color

Set the color of the key-value separator

See `-h color` for the list of available colors

--duration-abbreviation [bool]

Specify whether to abbreviate duration values

If true, the output will be in the form of "1h 2m" instead of "1 hour, 2 mins"

--duration-space-before-unit enum

Specify whether to put a space before the unit in duration values

--key-width num

Align the width of keys to <num> characters

--key-padding-left num

Set the left padding of keys to <num> characters

--key-type enum

Specify whether to show an icon before string keys

--bright-color [bool]

Specify whether keys, title, and ASCII logo should be printed in bright color

--separator str

Set the separator between key and value

--show-errors [bool]

Print errors when they occur

--disable-linewrap [bool]

Specify whether to disable line wrap during execution

--hide-cursor [bool]

Specify whether to hide the cursor during execution

--percent-type num

Set the percentage output type

1 for percentage number
2 for multi-color bar
3 for both
6 for bar only
9 for colored number
10 for monochrome bar

--percent-ndigits num

Set the number of digits to keep after the decimal point when formatting percentage numbers

--percent-color-green color

Set color used for the green state of percentage bars and numbers

See `-h color` for the list of available colors

--percent-color-yellow color

Set color used for the yellow state of percentage bars and numbers

See `-h color` for the list of available colors

--percent-color-red color

Set color used for the red state of percentage bars and numbers

See `-h color` for the list of available colors

--percent-space-before-unit enum

Specify whether to put a space before the percentage symbol

--percent-width num

Specify the width of the percentage number, in number of characters

This option affects only percentage numbers, not bars

--bar-char-elapsed str

Set the character to use in the elapsed part of percentage bars

--bar-char-total str

Set the character to use in the total part of percentage bars

--bar-border-left string

Set the string to use at the left border of percentage bars

--bar-border-right string

Set the string to use at the right border of percentage bars

--bar-border-left-elapsed string

If both bar-border-left-elapsed and bar-border-right-elapsed are set, the border will be used as parts of bar content

--bar-border-right-elapsed string

If both bar-border-left-elapsed and bar-border-right-elapsed are set, the border will be used as parts of bar content

--bar-color-elapsed color

Set the color to use in the elapsed part of percentage bars

By default, auto selected by percent-color-{green,yellow,red}

--bar-color-total color

Set the color to use in the total part of percentage bars

--bar-color-border color

Set the color to use in the borders of percentage bars

--bar-width num

Set the width of percentage bars in characters

--no-buffer [bool]

Specify whether the stdout application buffer should be disabled

--size-ndigits num

Set the number of digits to keep after the decimal point when formatting sizes

--size-binary-prefix enum

Set the binary prefix to use when formatting sizes

--size-max-prefix enum

Set the largest binary prefix to use when formatting sizes

--size-space-before-unit enum

Specify whether to put a space before the unit

--freq-ndigits num

Set the number of digits to keep after the decimal point when printing CPU/GPU frequency in GHz

--freq-space-before-unit enum

Specify whether to put a space before the unit

--fraction-ndigits num

Set the number of digits to keep after the decimal point when printing ordinary fraction numbers

If negative, the number of digits will be automatically determined based on the value

--fraction-trailing-zeros enum

Set when to keep trailing zeros

--temp-unit enum

Set the temperature unit

--temp-ndigits num

Set the number of digits to keep after the decimal point when printing temperature

--temp-color-green color

Set color used for the green state of temperature values

See `-h color` for the list of available colors

--temp-color-yellow color

Set color used for the yellow state of temperature values

See `-h color` for the list of available colors

--temp-color-red color

Set color used for the red state of temperature values

See `-h color` for the list of available colors

--temp-space-before-unit enum

Specify whether to put a space before the unit

Basic Usage

fastfetch

Use a specific logo

fastfetch --logo arch

Custom structure

fastfetch --structure title:os:kernel:uptime:memory

Generate a config file

fastfetch --gen-config

Use a preset

fastfetch --config neofetch

Config File Example

// ~/.config/fastfetch/config.jsonc
{


    "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",


    "logo": {


        "type": "auto",


        "source": "arch"


    },


    "display": {


        "separator": ": ",


        "color": {


            "keys": "blue",


            "title": "red"


        },


        "key": {


            "width": 12


        }


    },


    "modules": [


        "title",


        "separator",


        "os",


        "kernel",


        "uptime",


        {


            "type": "memory",


            "format": "{used}/{total} ({used_percent}%)"


        }


    ]
}