NAME

i3lock-color - improved screen locker

SYNOPSIS

i3lock [-v] [-n] [-b] [-i image.png] [-c color] [-t] [-p pointer] [-u] [-e] [-f] [-m]

DESCRIPTION

i3lock-color is a simple screen locker like slock. After starting it, you will see a white screen (you can configure the color/an image). You can return to your screen by entering your password.

FEATURES

•

i3lock forks, so you can combine it with an alias to suspend to RAM (run "i3lock && echo mem > /sys/power/state" to get a locked screen after waking up your computer from suspend to RAM)

•

You can specify either a background color or a PNG image which will be displayed while your screen is locked.

•

You can specify whether i3lock should bell upon a wrong password.

•

i3lock uses PAM and therefore is compatible with LDAP, etc.

OPTIONS

-v, --version

Display the version of your i3lock

-n, --nofork

Don't fork after starting.

-b, --beep

Enable beeping. Be sure to not do this when you are about to annoy other people, like when opening your laptop in a boring lecture.

-u, --no-unlock-indicator

Disable the unlock indicator. i3lock will by default show an unlock indicator after pressing keys. This will give feedback for every keypress and it will show you the current PAM state (whether your password is currently being verified or whether it is wrong).

-i path, --image=path

Display the given PNG image instead of a blank screen.

--raw=format

Read the image given by --image as a raw image instead of PNG. The argument is the image's format as <width>x<height>:<pixfmt>. The supported pixel formats are: ´native', 'rgb', 'xrgb', 'rgbx', 'bgr', 'xbgr', and 'bgrx'. The "native" pixel format expects a pixel as a 32-bit (4-byte) integer in the machine's native endianness, with the upper 8 bits unused. Red, green and blue are stored in the remaining bits, in that order.

Example:

	--raw=1920x1080:rgb
    

You can use ImageMagick’s convert(1) program to feed raw images into i3lock:

	convert wallpaper.jpg RGB:- | i3lock --raw 3840x2160:rgb --image /dev/stdin
    

This allows you to load a variety of image formats without i3lock having to support each one explicitly. You can also use it to resize images to the screen ratio:

	convert wallpaper.jpg -resize $(xdpyinfo | grep dimensions | sed -r 's/^[^0-9]*([0-9]+x[0-9]+).*$/1/') RGB:- | i3lock --raw $(xdpyinfo | grep dimensions | sed -r 's/^[^0-9]*([0-9]+x[0-9]+).*$/1/'):rgb --image /dev/stdin
    

Note that $(xdpyinfo | grep dimensions | sed -r 's/^[^0-9]*([0-9]+x[0-9]+).*$/1/') gets you the current screen dimensions in the wxh (e.g. 1920x1080) format.

-c rrggbbaa, --color=rrggbbaa

Turn the screen into the given color instead of white. Color must be given in 4-byte format: rrggbbaa (i.e. ff0000ff is opaque red). Use the last byte for alpha. Setting this below FF (i.e. ff000088) will allow your screen to be shown translucently if you use a compositor (e.g. compton, xcompmgr).

-t, --tiling

If an image is specified (via -i) it will display the image tiled all over the screen.

Note: For all image options, with a multi-monitor setup, the image is visible on all screens.

-C, --centered

If an image is specified (via -i) it will display the image centered on the screen.

-F, --fill

If an image is specified (via -i) it will scale the image until it fills the screen. A portion of the image will be cropped.

-M, --max

If an image is specified (via -i) it will scale the image until either the width or the height fits the screen without being cropped. The border color can be set via -c.

-L, --scale

If an image is specified (via -i) it will stretch the image until both the width and the height fits the screen.

-p win|default, --pointer=win|default

If you specify "default", i3lock does not hide your mouse pointer. If you specify "win", i3lock displays a hardcoded Windows-Pointer (thus enabling you to mess with your friends by using a screenshot of a Windows desktop as a locking-screen).

-e, --ignore-empty-password

When an empty password is provided by the user, do not validate it. Without this option, the empty password will be provided to PAM and, if invalid, the user will have to wait a few seconds before another try. This can be useful if the XF86ScreenSaver key is used to put a laptop to sleep and bounce on resume or if you happen to wake up your computer with the enter key.

-f, --show-failed-attempts

Show the number of failed attempts, if any.

--debug

Enables debug logging. Note, that this will log the password used for authentication to stdout.

i3lock-color OPTIONS

-S number, --screen=number

Specifies which display to draw the unlock indicator and clock on. By default, they'll be placed on every screen. Note that this number is zero indexed. The ordering is dependent on libxinerama.

-B sigma, --blur=sigma

Captures the screen and blurs it using the given sigma (radius). Images may still be overlaid over the blurred screenshot. As an alternative to this option, you could specify a translucent background color (-c option) with a fully transparent or translucent color, and use a compositor to perform blurring (e.g. compton, picom).

-k, --clock, --force-clock

Displays the clock. --force-clock also displays the clock when there's indicator text (useful for when the clock is not positioned with the indicator).

--indicator

Forces the indicator to always be visible, instead of only showing on activity.

--radius

The radius of the circle. Defaults to 90.

--ring-width

The width of the ring unlock indicator. Defaults to 7.0.

--{inside, ring}-color=rrggbbaa

Sets the idle color for the interior circle and ring. Note: use individual options per element unless the shell supports brace expansion (in which case remove the spaces inside the curly braces).

--{inside, ring}ver-color=rrggbbaa

Sets the interior circle and ring color while the password is being verified.

--{inside, ring}wrong-color=rrggbbaa

Sets the interior circle and ring color for during incorrect password flashes.

--line-color=rrggbbaa

Sets the color for the line separating the inside circle and the outer ring.

--line-uses-{inside, ring}

Overrides --line-color. The line will match the {inside, ring} color. Note: these two options conflict with each other.

--{key, bs}hl-color=rrggbbaa

Sets the color of highlight arcs on the ring upon keypress and backspace.

--separator-color=rrggbbaa

Sets the color of the seperators at both ends of the highlight arcs on the ring.

--{verif, wrong, modif}-color=rrggbbaa

Sets the color of the status text while verifying and when password is wrong.

--{layout, time, date, greeter}-color=rrggbbaa

Sets text colors.

--time-str="%H:%M:%S"

Sets the format used for generating the time string. See strftime(3) for a full list of format specifiers.

--date-str="%A, %m %Y"

Sets the format used for generating the date string.

--verif-text="verifying…"

Sets the string to be shown while verifying the password/input/key/etc.

--wrong-text="wrong!"

Sets the string to be shown upon entering an incorrect password.

--keylayout mode

Displays the keylayout. Positionable similar to date, time, and indicator. Modes are as follows:

--noinput-text="no input"

Sets the string to be shown upon pressing backspace without anything to delete.

--lock-text="locking…"

Sets the string to be shown while acquiring pointer and keyboard focus.

--lockfailed-text="lock failed!"

Sets the string to be shown after failing to acquire pointer and keyboard focus.

--greeter-text=""

Sets the greeter text.

--no-modkey-text

Hides the modkey indicator (Num, Caps Lock ...)

--{time, date, layout, verif, wrong, modif, greeter}-align

Sets the text alignment of the time, date, keylayout, verification, wrong, modifier and greeter texts.

--{time, date, layout, verif, wrong, greeter, modif}outline-color=rrggbbaa

Sets the color of the outlines.

--{time, date, layout, verif, wrong, greeter}-font=sans-serif

Sets the font used to render various strings.

--{time, date, layout, verif, wrong, greeter}-size=number

Sets the font size used to render various strings.

--{time, date, layout, verif, wrong, greeter, modifier}outline-width=number

Sets the width of the outline.

--ind-pos="x-position:y-position"

Sets the position for the unlock indicator. Valid variables include:

--time-pos="x-position:y-position"

Sets the position for the time string. All the variables from --ind-pos may be used, in addition to:

--date-pos="x-position:y-position"

Sets the position for the date string. All the variables from --ind-pos and --time-pos may be used, in addition to:

--greeter-pos="x-position:y-position"

Sets the position for the greeter string. All the variables from --ind-pos and --time-pos may be used.

--pass-{media, screen, power, volume}-keys

Allow the following keys to be used normally while the screen is locked by passing them through:

--bar-indicator

Replaces the usual ring indicator with a bar indicator. Comes with perks.

--bar-direction={0, 1, 2}

Sets the direction the bars grow in. 0 is the default (downwards, or rightwards, depending on the bar orientation). 1 is the reverse, and 2 is both.

--bar-orientation={vertical,horizontal}

Sets whether the bar is vertically or horizontally oriented. Defaults to horizontal.

--bar-step

Sets the step that each bar decreases by when a key is pressed. A random bar is set to its max height, then each neighbor is set to (height - step*distance).

--bar-max-height

The maximum height a bar can get to. When a key is pressed, a random bar is set to this value, then its neighbors are set to its height, minus the step value.

--bar-base-width

The thickness of the "base" bar that all the bars originate from. This bar also takes on the ring verification and wrong colors to give authentication feedback.

--bar-color

Sets the default color of the bar base.

--bar-periodic-step

The value by which the bars decrease each time the screen is redrawn.

--bar-pos

Works similarly to the time/date/indicator expressions. If only one number is provided, this sets the vertical offset from the top or left edge. If two numbers are provided in the form of x:y, sets the starting position of the bar.

--bar-count

Sets the number of minibars to draw on each screen.

--bar-total-width

The total width of the bar. Can be an expression.

--redraw-thread

Starts a separate thread for redrawing the screen. Potentially worse from a security standpoint, but makes the bar indicator still do its usual periodic redraws when PAM is authenticating.

--refresh-rate=seconds-as-double

The refresh rate of the indicator, given in seconds. This should automatically align itself, but is somewhat buggy currently. Values less than one will work, but may result in poor system performance.

--composite

Some compositors have problems with i3lock trying to render over them, so this argument is disabled by default. However, some will work properly with it, so it's been left enabled.

--no-verify

Do not verify the password entered by the user and unlock immediately. Use only for quickly testing new configurations and remember to remove to actually lock your screen!

--slideshow-interval

The interval to wait until switching to the next image.

--slideshow-random-selection

Randomize the order of the images.

SEE ALSO

xautolock(1) - use i3lock as your screen saver

convert(1) - feed a wide variety of image formats to i3lock

AUTHOR

Michael Stapelberg <michael+i3lock at stapelberg dot de>

Jan-Erik Rediger <badboy at archlinux.us>

Pandora <pandora at techfo dot xyz>

Raymond Li <i3lock-color at raymond.li>