NAME

coap_endpoint_client, coap_new_client_session, coap_new_client_session_psk2, coap_new_client_session_pki, coap_session_set_mtu, coap_session_max_pdu_size - Work with CoAP client endpoints

SYNOPSIS

#include <coap3/coap.h>

coap_session_t *coap_new_client_session(coap_context_t * context, const coap_address_t *local_if, const coap_address_t *server, coap_proto_t proto);

coap_session_t *coap_new_client_session_psk2(coap_context_t *context, const coap_address_t *local_if, const coap_address_t *server, coap_proto_t proto, coap_dtls_cpsk_t *setup_data);

coap_session_t *coap_new_client_session_pki(coap_context_t *context, const coap_address_t *local_if, const coap_address_t *server, coap_proto_t proto, coap_dtls_pki_t *setup_data);

void coap_session_set_mtu(coap_session_t *session, unsigned mtu);

size_t coap_session_max_pdu_size(const coap_session_t * session);

For specific (D)TLS library support, link with -lcoap-3-notls, -lcoap-3-gnutls, -lcoap-3-openssl, -lcoap-3-mbedtls or -lcoap-3-tinydtls. Otherwise, link with -lcoap-3 to get the default (D)TLS library support.

DESCRIPTION

This man page focuses on the setting up of a CoAP client endpoint and hence creation of a CoAP Session used to connect to a server. For a CoAP server endpoint, see coap_endpoint_server(3).

The CoAP stack’s global state is stored in a coap_context_t Context object. Resources, Endpoints and Sessions are associated with this context object. There can be more than one coap_context_t object per application, it is up to the application to manage each one accordingly.

A CoAP Ssssion maintains the state of an ongoing connection between a Client and Server which is stored in a coap_session_t Session object. A CoAP session is tracked by local port, CoAP protocol, remote IP address and remote port.

The Session network traffic can be encrypted or un-encrypted if there is an underlying TLS library.

If TLS is going to be used for encrypting the network traffic, then the TLS information for Pre-Shared Keys (PSK) or Public Key Infrastructure (PKI) needs to be configured before any network traffic starts to flow. For Servers, this has to be done before the Endpoint is created, for Clients, this is done during the Client Endpoint/Session set up.

For Clients, all the encryption information can be held at the TLS Context and CoAP Context levels, or at the TLS Session and CoAP Session levels. If defined at the Context level, then when Sessions are created, they will inherit the Context definitions, unless they have separately been defined for the Session level, in which case the Session version will get used. Typically the information will be configured at the Session level for Clients.

In principle the set-up sequence for CoAP client endpoints looks like

coap_new_context()
coap_context_set_pki_root_cas() if the root CAs need to be updated and PKI
coap_new_client_session(), coap_new_client_session_pki() or coap_new_client_session_psk2()

Multiple client endpoints and hence sessions are supported per Context.

Different CoAP protocols can be defined for proto - the current supported list is:

COAP_PROTO_UDP
COAP_PROTO_DTLS
COAP_PROTO_TCP
COAP_PROTO_TLS

coap_tcp_is_supported(), coap_dtls_is_supported() and coap_tls_is_supported() can be used for checking whether the underlying TCP or (D)TLS protocol support is available. See coap_tls_library(3) for further information.

The coap_new_client_session() function creates a client endpoint for a specific context and initiates a new client session to the specified server using the CoAP protocol proto. If the port is set to 0 in server, then the default CoAP port is used. Normally local_if would be set to NULL, but by specifying local_if the source of the network session can be bound to a specific IP address or port. The session will initially have a reference count of 1.

The coap_new_client_session_pki() function, for a specific context, is used to configure the TLS context using the setup_data variables as defined in the coap_dtls_pki_t structure in the newly created endpoint session - see coap_encryption(3). The connection is to the specified server using the CoAP protocol proto. If the port is set to 0 in server, then the default CoAP port is used. Normally local_if would be set to NULL, but by specifying local_if the source of the network session can be bound to a specific IP address or port. The session will initially have a reference count of 1.

The coap_new_client_session_psk2() function, for a specific context, is used to configure the TLS context using the setup_data variables as defined in the coap_dtls_cpsk_t structure in the newly created endpoint session - see coap_encryption(3). The connection is to the specified server using the CoAP protocol proto. If the port is set to 0 in server, then the default CoAP port is used. Normally local_if would be set to NULL, but by specifying local_if the source of the network session can be bound to a specific IP address or port. The session will initially have a reference count of 1.

To stop using a client session, the reference count must be decremented to 0 by calling coap_session_release(). See coap_session(3). This will remove the client endpoint.

The coap_sesson_set_default_mtu() function is used to set the MTU size (the maximum message size) of the data in a packet, excluding any IP or TCP/UDP overhead to mtu for the client endpoint’s session. The default MTU is 1152.

The coap_session_max_pdu_size() function is used to get the maximum MTU size of the data for the client endpoint’s session.

RETURN VALUES

coap_new_client_session(), coap_new_client_session_psk2(), coap_new_client_session_pki() functions returns a newly created client session or NULL if there is a creation failure.

coap_session_max_pdu_size() function returns the MTU size.

EXAMPLES

CoAP Client Non-Encrypted Setup

#include <coap3/coap.h>
#include <netinet/in.h>
static coap_session_t *
setup_client_session (struct in_addr ip_address) {
  coap_session_t *session;
  coap_address_t server;
  /* See coap_context(3) */
  coap_context_t *context = coap_new_context(NULL);
  if (!context)
    return NULL;
  /* See coap_block(3) */
  coap_context_set_block_mode(context,
                              COAP_BLOCK_USE_LIBCOAP | COAP_BLOCK_SINGLE_BODY);
  coap_address_init(&server);
  server.addr.sa.sa_family = AF_INET;
  server.addr.sin.sin_addr = ip_address;
  server.addr.sin.sin_port = htons (5683);
  session = coap_new_client_session(context, NULL, &server, COAP_PROTO_UDP);
  if (!session) {
    coap_free_context(context);
    return NULL;
  }
  /* The context is in session->context */
  return session;
}

CoAP Client PKI Setup

#include <coap3/coap.h>
#include <netinet/in.h>
static int
verify_cn_callback(const char *cn,
                   const uint8_t *asn1_public_cert,
                   size_t asn1_length,
                   coap_session_t *c_session,
                   unsigned int depth,
                   int validated,
                   void *arg
) {
  /* Remove (void) definition if variable is used */
  (void)cn;
  (void)asn1_public_cert;
  (void)asn1_length;
  (void)c_session;
  (void)depth;
  (void)validated;
  (void)arg;
  /* Check that the CN is valid */
  /* ... */
  return 1;
}
static coap_session_t *
setup_client_session_pki (struct in_addr ip_address,
                          const char *public_cert_file,
                          const char *private_key_file,
                          const char *ca_file
) {
  coap_session_t *session;
  coap_address_t server;
  coap_dtls_pki_t dtls_pki;
  /* See coap_context(3) */
  coap_context_t *context = coap_new_context(NULL);
  if (!context)
    return NULL;
  /* See coap_block(3) */
  coap_context_set_block_mode(context,
                              COAP_BLOCK_USE_LIBCOAP | COAP_BLOCK_SINGLE_BODY);
  coap_address_init(&server);
  server.addr.sa.sa_family = AF_INET;
  server.addr.sin.sin_addr = ip_address;
  server.addr.sin.sin_port = htons (5684);
  memset (&dtls_pki, 0, sizeof (dtls_pki));
  /* See coap_encryption(3) */
  dtls_pki.version                 = COAP_DTLS_PKI_SETUP_VERSION;
  dtls_pki.verify_peer_cert        = 1;
  dtls_pki.check_common_ca         = 1;
  dtls_pki.allow_self_signed       = 1;
  dtls_pki.allow_expired_certs     = 1;
  dtls_pki.cert_chain_validation   = 1;
  dtls_pki.cert_chain_verify_depth = 1;
  dtls_pki.check_cert_revocation   = 1;
  dtls_pki.allow_no_crl            = 1;
  dtls_pki.allow_expired_crl       = 1;
  dtls_pki.allow_bad_md_hash       = 0;
  dtls_pki.allow_short_rsa_length  = 0;
  dtls_pki.is_rpk_not_cert         = 0; /* Set to 1 if RPK */
  dtls_pki.validate_cn_call_back   = verify_cn_callback;
  dtls_pki.cn_call_back_arg        = NULL;
  dtls_pki.validate_sni_call_back  = NULL;
  dtls_pki.sni_call_back_arg       = NULL;
  dtls_pki.additional_tls_setup_call_back = NULL;
  dtls_pki.client_sni              = NULL;
  dtls_pki.pki_key.key_type        = COAP_PKI_KEY_PEM;
  dtls_pki.pki_key.key.pem.ca_file = ca_file;
  dtls_pki.pki_key.key.pem.public_cert = public_cert_file;
  dtls_pki.pki_key.key.pem.private_key = private_key_file;
  session = coap_new_client_session_pki(context, NULL, &server,
                                        COAP_PROTO_DTLS, &dtls_pki);
  if (!session) {
    coap_free_context(context);
    return NULL;
  }
  /* The context is in session->context */
  return session;
}

CoAP Client PSK Setup

#include <coap3/coap.h>
#include <stdio.h>
#include <netinet/in.h>
#ifndef min
#define min(a,b) ((a) < (b) ? (a) : (b))
#endif
static const coap_dtls_cpsk_info_t *
verify_ih_callback(coap_str_const_t *hint,
                   coap_session_t *c_session,
                   void *arg
) {
  coap_dtls_cpsk_info_t *psk_info = (coap_dtls_cpsk_info_t *)arg;
  /* Remove (void) definition if variable is used */
  (void)c_session;
  coap_log(LOG_INFO, "Identity Hint '%.*s' provided\n", (int)hint->length, hint->s);
  /* Just use the defined information for now as passed in by arg */
  return psk_info;
}
static coap_dtls_cpsk_t dtls_psk;
static char client_sni[256];
static coap_session_t *
setup_client_session_psk (const char *uri,
                          struct in_addr ip_address,
                          const uint8_t *identity,
                          unsigned int identity_len,
                          const uint8_t *key,
                          unsigned int key_len
) {
  coap_session_t *session;
  coap_address_t server;
  /* See coap_context(3) */
  coap_context_t *context = coap_new_context(NULL);
  if (!context)
    return NULL;
  /* See coap_block(3) */
  coap_context_set_block_mode(context,
                              COAP_BLOCK_USE_LIBCOAP | COAP_BLOCK_SINGLE_BODY);
  coap_address_init(&server);
  server.addr.sa.sa_family = AF_INET;
  server.addr.sin.sin_addr = ip_address;
  server.addr.sin.sin_port = htons (5684);
  /* See coap_encryption(3) */
  memset (&dtls_psk, 0, sizeof(dtls_psk));
  dtls_psk.version = COAP_DTLS_CPSK_SETUP_VERSION;
  dtls_psk.validate_ih_call_back = verify_ih_callback;
  dtls_psk.ih_call_back_arg = &dtls_psk.psk_info;
  if (uri)
    memcpy(client_sni, uri, min(strlen(uri), sizeof(client_sni)-1));
  else
    memcpy(client_sni, "localhost", 9);
  dtls_psk.client_sni = client_sni;
  dtls_psk.psk_info.identity.s = identity;
  dtls_psk.psk_info.identity.length = identity_len;
  dtls_psk.psk_info.key.s = key;
  dtls_psk.psk_info.key.length = key_len;
  session = coap_new_client_session_psk2(context, NULL, &server,
                                        COAP_PROTO_DTLS, &dtls_psk);
  if (!session) {
    coap_free_context(context);
    return NULL;
  }
  /* The context is in session->context */
  return session;
}

CoAP Client Anonymous PKI Setup

#include <coap3/coap.h>
#include <netinet/in.h>
static coap_session_t *
setup_client_session_dtls (struct in_addr ip_address) {
  coap_session_t *session;
  coap_address_t server;
  /* See coap_context(3) */
  coap_context_t *context = coap_new_context(NULL);
  if (!context)
    return NULL;
  /* See coap_block(3) */
  coap_context_set_block_mode(context,
                              COAP_BLOCK_USE_LIBCOAP | COAP_BLOCK_SINGLE_BODY);
  coap_address_init(&server);
  server.addr.sa.sa_family = AF_INET;
  server.addr.sin.sin_addr = ip_address;
  server.addr.sin.sin_port = htons (5683);
  session = coap_new_client_session(context, NULL, &server,
                                        COAP_PROTO_DTLS);
  if (!session) {
    coap_free_context(context);
    return NULL;
  }
  /* The context is in session->context */
  return session;
}

FURTHER INFORMATION

See "RFC7252: The Constrained Application Protocol (CoAP)" for further information.

BUGS

Please report bugs on the mailing list for libcoap: libcoap-developers@lists.sourceforge.net or raise an issue on GitHub at https://github.com/obgm/libcoap/issues

AUTHORS

The libcoap project <libcoap-developers@lists.sourceforge.net>