SYNTAX

#include <mpi.h>
int MPI_Scatter(const void *sendbuf, int sendcount, MPI_Datatype sendtype,


     void *recvbuf, int recvcount, MPI_Datatype recvtype, int root,


     MPI_Comm comm)
int MPI_Iscatter(const void *sendbuf, int sendcount, MPI_Datatype sendtype,


     void *recvbuf, int recvcount, MPI_Datatype recvtype, int root,


     MPI_Comm comm, MPI_Request *request)
int MPI_Scatter_init(const void *sendbuf, int sendcount, MPI_Datatype sendtype,


     void *recvbuf, int recvcount, MPI_Datatype recvtype, int root,


     MPI_Comm comm, MPI_Info info, MPI_Request *request)

USE MPI
! or the older form: INCLUDE 'mpif.h'
MPI_SCATTER(SENDBUF, SENDCOUNT, SENDTYPE, RECVBUF, RECVCOUNT,


             RECVTYPE, ROOT, COMM, IERROR)


     <type>  SENDBUF(*), RECVBUF(*)


     INTEGER SENDCOUNT, SENDTYPE, RECVCOUNT, RECVTYPE, ROOT


     INTEGER COMM, IERROR
MPI_ISCATTER(SENDBUF, SENDCOUNT, SENDTYPE, RECVBUF, RECVCOUNT,


             RECVTYPE, ROOT, COMM, REQUEST, IERROR)


     <type>  SENDBUF(*), RECVBUF(*)


     INTEGER SENDCOUNT, SENDTYPE, RECVCOUNT, RECVTYPE, ROOT


     INTEGER COMM, REQUEST, IERROR
MPI_SCATTER_INIT(SENDBUF, SENDCOUNT, SENDTYPE, RECVBUF, RECVCOUNT,


             RECVTYPE, ROOT, COMM, INFO, REQUEST, IERROR)


     <type>  SENDBUF(*), RECVBUF(*)


     INTEGER SENDCOUNT, SENDTYPE, RECVCOUNT, RECVTYPE, ROOT


     INTEGER COMM, INFO, REQUEST, IERROR

USE mpi_f08
MPI_Scatter(sendbuf, sendcount, sendtype, recvbuf, recvcount, recvtype,


             root, comm, ierror)


     TYPE(*), DIMENSION(..), INTENT(IN) :: sendbuf


     TYPE(*), DIMENSION(..) :: recvbuf


     INTEGER, INTENT(IN) :: sendcount, recvcount, root


     TYPE(MPI_Datatype), INTENT(IN) :: sendtype, recvtype


     TYPE(MPI_Comm), INTENT(IN) :: comm


     INTEGER, OPTIONAL, INTENT(OUT) :: ierror
MPI_Iscatter(sendbuf, sendcount, sendtype, recvbuf, recvcount, recvtype,


             root, comm, request, ierror)


     TYPE(*), DIMENSION(..), INTENT(IN), ASYNCHRONOUS :: sendbuf


     TYPE(*), DIMENSION(..), ASYNCHRONOUS :: recvbuf


     INTEGER, INTENT(IN) :: sendcount, recvcount, root


     TYPE(MPI_Datatype), INTENT(IN) :: sendtype, recvtype


     TYPE(MPI_Comm), INTENT(IN) :: comm


     TYPE(MPI_Request), INTENT(OUT) :: request


     INTEGER, OPTIONAL, INTENT(OUT) :: ierror
MPI_Scatter_init(sendbuf, sendcount, sendtype, recvbuf, recvcount, recvtype,


             root, comm, info, request, ierror)


     TYPE(*), DIMENSION(..), INTENT(IN), ASYNCHRONOUS :: sendbuf


     TYPE(*), DIMENSION(..), ASYNCHRONOUS :: recvbuf


     INTEGER, INTENT(IN) :: sendcount, recvcount, root


     TYPE(MPI_Datatype), INTENT(IN) :: sendtype, recvtype


     TYPE(MPI_Comm), INTENT(IN) :: comm


     TYPE(MPI_Info), INTENT(IN) :: info


     TYPE(MPI_Request), INTENT(OUT) :: request


     INTEGER, OPTIONAL, INTENT(OUT) :: ierror

INPUT PARAMETERS

OUTPUT PARAMETERS

DESCRIPTION

MPI_Scatter is the inverse operation to MPI_Gather.

The outcome is as if the root executed n send operations,

MPI_Send(sendbuf + i * sendcount * extent(sendtype), sendcount,


         sendtype, i, ...);

and each process executed a receive,

MPI_Recv(recvbuf, recvcount, recvtype, i, ...).;

An alternative description is that the root sends a message with MPI_Send(sendbuf, sendcount * n, sendtype, ...). This message is split into n equal segments, the ith segment is sent to the ith process in the group, and each process receives this message as above.

The send buffer is ignored for all nonroot processes.

The type signature associated with sendcount, sendtype at the root must be equal to the type signature associated with recvcount, recvtype at all processes (however, the type maps may be different). This implies that the amount of data sent must be equal to the amount of data received, pairwise between each process and the root. Distinct type maps between sender and receiver are still allowed.

All arguments to the function are significant on process root, while on other processes, only arguments recvbuf, recvcount, recvtype, root, comm are significant. The arguments root and comm must have identical values on all processes.

The specification of counts and types should not cause any location on the root to be read more than once.

Rationale: Though not needed, the last restriction is imposed so as to achieve symmetry with MPI_Gather, where the corresponding restriction (a multiple-write restriction) is necessary.

Example: The reverse of Example 1 in the MPI_Gather manpage. Scatter sets of 100 ints from the root to each process in the group.

MPI_Comm comm;
int gsize,*sendbuf;
int root, rbuf[100];
...
MPI_Comm_size(comm, &gsize);
sendbuf = (int *)malloc(gsize*100*sizeof(int));
...
MPI_Scatter(sendbuf, 100, MPI_INT, rbuf, 100,


            MPI_INT, root, comm);

USE OF IN-PLACE OPTION

When the communicator is an intracommunicator, you can perform a scatter operation in-place (the output buffer is used as the input buffer). Use the variable MPI_IN_PLACE as the value of the root process recvbuf. In this case, recvcount and recvtype are ignored, and the root process sends no data to itself.

Note that MPI_IN_PLACE is a special kind of value; it has the same restrictions on its use as MPI_BOTTOM.

Because the in-place option converts the receive buffer into a send-and-receive buffer, a Fortran binding that includes INTENT must mark these as INOUT, not OUT.

WHEN COMMUNICATOR IS AN INTER-COMMUNICATOR

When the communicator is an inter-communicator, the root process in the first group sends data to all processes in the second group. The first group defines the root process. That process uses MPI_ROOT as the value of its root argument. The remaining processes use MPI_PROC_NULL as the value of their root argument. All processes in the second group use the rank of that root process in the first group as the value of their root argument. The receive buffer argument of the root process in the first group must be consistent with the receive buffer argument of the processes in the second group.

ERRORS

Almost all MPI routines return an error value; C routines as the return result of the function and Fortran routines in the last argument.

Before the error value is returned, the current MPI error handler associated with the communication object (e.g., communicator, window, file) is called. If no communication object is associated with the MPI call, then the call is considered attached to MPI_COMM_SELF and will call the associated MPI error handler. When MPI_COMM_SELF is not initialized (i.e., before MPI_Init/MPI_Init_thread, after MPI_Finalize, or when using the Sessions Model exclusively) the error raises the initial error handler. The initial error handler can be changed by calling MPI_Comm_set_errhandler on MPI_COMM_SELF when using the World model, or the mpi_initial_errhandler CLI argument to mpiexec or info key to MPI_Comm_spawn/MPI_Comm_spawn_multiple. If no other appropriate error handler has been set, then the MPI_ERRORS_RETURN error handler is called for MPI I/O functions and the MPI_ERRORS_ABORT error handler is called for all other MPI functions.

Open MPI includes three predefined error handlers that can be used:

MPI applications can also implement their own error handlers by calling:

Note that MPI does not guarantee that an MPI program can continue past an error.

See the MPI man page for a full list of MPI error codes.

See the Error Handling section of the MPI-3.1 standard for more information.

SEE ALSO:

COPYRIGHT

2003-2025, The Open MPI Community