ActivateEventSource

Name => Str

Each argument is described in detail in: Paws::CloudWatchEvents::ActivateEventSource

Returns: nothing

Activates a partner event source that has been deactivated. Once activated, your matching event bus will start receiving events from the event source.

CancelReplay

ReplayName => Str

Each argument is described in detail in: Paws::CloudWatchEvents::CancelReplay

Returns: a Paws::CloudWatchEvents::CancelReplayResponse instance

Cancels the specified replay.

CreateApiDestination

ConnectionArn => Str

HttpMethod => Str

InvocationEndpoint => Str

Name => Str

[Description => Str]

[InvocationRateLimitPerSecond => Int]

Each argument is described in detail in: Paws::CloudWatchEvents::CreateApiDestination

Returns: a Paws::CloudWatchEvents::CreateApiDestinationResponse instance

Creates an API destination, which is an HTTP invocation endpoint configured as a target for events.

CreateArchive

ArchiveName => Str

EventSourceArn => Str

[Description => Str]

[EventPattern => Str]

[RetentionDays => Int]

Each argument is described in detail in: Paws::CloudWatchEvents::CreateArchive

Returns: a Paws::CloudWatchEvents::CreateArchiveResponse instance

Creates an archive of events with the specified settings. When you create an archive, incoming events might not immediately start being sent to the archive. Allow a short period of time for changes to take effect. If you do not specify a pattern to filter events sent to the archive, all events are sent to the archive except replayed events. Replayed events are not sent to an archive.

CreateConnection

AuthorizationType => Str

AuthParameters => Paws::CloudWatchEvents::CreateConnectionAuthRequestParameters

Name => Str

[Description => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::CreateConnection

Returns: a Paws::CloudWatchEvents::CreateConnectionResponse instance

Creates a connection. A connection defines the authorization type and credentials to use for authorization with an API destination HTTP endpoint.

CreateEventBus

Name => Str

[EventSourceName => Str]

[Tags => ArrayRef[Paws::CloudWatchEvents::Tag]]

Each argument is described in detail in: Paws::CloudWatchEvents::CreateEventBus

Returns: a Paws::CloudWatchEvents::CreateEventBusResponse instance

Creates a new event bus within your account. This can be a custom event bus which you can use to receive events from your custom applications and services, or it can be a partner event bus which can be matched to a partner event source.

CreatePartnerEventSource

Account => Str

Name => Str

Each argument is described in detail in: Paws::CloudWatchEvents::CreatePartnerEventSource

Returns: a Paws::CloudWatchEvents::CreatePartnerEventSourceResponse instance

Called by an SaaS partner to create a partner event source. This operation is not used by AWS customers.

Each partner event source can be used by one AWS account to create a matching partner event bus in that AWS account. A SaaS partner must create one partner event source for each AWS account that wants to receive those event types.

A partner event source creates events based on resources within the SaaS partner's service or application.

An AWS account that creates a partner event bus that matches the partner event source can use that event bus to receive events from the partner, and then process them using AWS Events rules and targets.

Partner event source names follow this format:

"partner_name/event_namespace/event_name"

partner_name is determined during partner registration and identifies the partner to AWS customers. event_namespace is determined by the partner and is a way for the partner to categorize their events. event_name is determined by the partner, and should uniquely identify an event-generating resource within the partner system. The combination of event_namespace and event_name should help AWS customers decide whether to create an event bus to receive these events.

DeactivateEventSource

Name => Str

Each argument is described in detail in: Paws::CloudWatchEvents::DeactivateEventSource

Returns: nothing

You can use this operation to temporarily stop receiving events from the specified partner event source. The matching event bus is not deleted.

When you deactivate a partner event source, the source goes into PENDING state. If it remains in PENDING state for more than two weeks, it is deleted.

To activate a deactivated partner event source, use ActivateEventSource.

DeauthorizeConnection

Name => Str

Each argument is described in detail in: Paws::CloudWatchEvents::DeauthorizeConnection

Returns: a Paws::CloudWatchEvents::DeauthorizeConnectionResponse instance

Removes all authorization parameters from the connection. This lets you remove the secret from the connection so you can reuse it without having to create a new connection.

DeleteApiDestination

Name => Str

Each argument is described in detail in: Paws::CloudWatchEvents::DeleteApiDestination

Returns: a Paws::CloudWatchEvents::DeleteApiDestinationResponse instance

Deletes the specified API destination.

DeleteArchive

ArchiveName => Str

Each argument is described in detail in: Paws::CloudWatchEvents::DeleteArchive

Returns: a Paws::CloudWatchEvents::DeleteArchiveResponse instance

Deletes the specified archive.

DeleteConnection

Name => Str

Each argument is described in detail in: Paws::CloudWatchEvents::DeleteConnection

Returns: a Paws::CloudWatchEvents::DeleteConnectionResponse instance

Deletes a connection.

DeleteEventBus

Name => Str

Each argument is described in detail in: Paws::CloudWatchEvents::DeleteEventBus

Returns: nothing

Deletes the specified custom event bus or partner event bus. All rules associated with this event bus need to be deleted. You can't delete your account's default event bus.

DeletePartnerEventSource

Account => Str

Name => Str

Each argument is described in detail in: Paws::CloudWatchEvents::DeletePartnerEventSource

Returns: nothing

This operation is used by SaaS partners to delete a partner event source. This operation is not used by AWS customers.

When you delete an event source, the status of the corresponding partner event bus in the AWS customer account becomes DELETED.

DeleteRule

Name => Str

[EventBusName => Str]

[Force => Bool]

Each argument is described in detail in: Paws::CloudWatchEvents::DeleteRule

Returns: nothing

Deletes the specified rule.

Before you can delete the rule, you must remove all targets, using RemoveTargets.

When you delete a rule, incoming events might continue to match to the deleted rule. Allow a short period of time for changes to take effect.

If you call delete rule multiple times for the same rule, all calls will succeed. When you call delete rule for a non-existent custom eventbus, "ResourceNotFoundException" is returned.

Managed rules are rules created and managed by another AWS service on your behalf. These rules are created by those other AWS services to support functionality in those services. You can delete these rules using the "Force" option, but you should do so only if you are sure the other service is not still using that rule.

DescribeApiDestination

Name => Str

Each argument is described in detail in: Paws::CloudWatchEvents::DescribeApiDestination

Returns: a Paws::CloudWatchEvents::DescribeApiDestinationResponse instance

Retrieves details about an API destination.

DescribeArchive

ArchiveName => Str

Each argument is described in detail in: Paws::CloudWatchEvents::DescribeArchive

Returns: a Paws::CloudWatchEvents::DescribeArchiveResponse instance

Retrieves details about an archive.

DescribeConnection

Name => Str

Each argument is described in detail in: Paws::CloudWatchEvents::DescribeConnection

Returns: a Paws::CloudWatchEvents::DescribeConnectionResponse instance

Retrieves details about a connection.

DescribeEventBus

[Name => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::DescribeEventBus

Returns: a Paws::CloudWatchEvents::DescribeEventBusResponse instance

Displays details about an event bus in your account. This can include the external AWS accounts that are permitted to write events to your default event bus, and the associated policy. For custom event buses and partner event buses, it displays the name, ARN, policy, state, and creation time.

To enable your account to receive events from other accounts on its default event bus, use PutPermission.

For more information about partner event buses, see CreateEventBus.

DescribeEventSource

Name => Str

Each argument is described in detail in: Paws::CloudWatchEvents::DescribeEventSource

Returns: a Paws::CloudWatchEvents::DescribeEventSourceResponse instance

This operation lists details about a partner event source that is shared with your account.

DescribePartnerEventSource

Name => Str

Each argument is described in detail in: Paws::CloudWatchEvents::DescribePartnerEventSource

Returns: a Paws::CloudWatchEvents::DescribePartnerEventSourceResponse instance

An SaaS partner can use this operation to list details about a partner event source that they have created. AWS customers do not use this operation. Instead, AWS customers can use DescribeEventSource to see details about a partner event source that is shared with them.

DescribeReplay

ReplayName => Str

Each argument is described in detail in: Paws::CloudWatchEvents::DescribeReplay

Returns: a Paws::CloudWatchEvents::DescribeReplayResponse instance

Retrieves details about a replay. Use "DescribeReplay" to determine the progress of a running replay. A replay processes events to replay based on the time in the event, and replays them using 1 minute intervals. If you use "StartReplay" and specify an "EventStartTime" and an "EventEndTime" that covers a 20 minute time range, the events are replayed from the first minute of that 20 minute range first. Then the events from the second minute are replayed. You can use "DescribeReplay" to determine the progress of a replay. The value returned for "EventLastReplayedTime" indicates the time within the specified time range associated with the last event replayed.

DescribeRule

Name => Str

[EventBusName => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::DescribeRule

Returns: a Paws::CloudWatchEvents::DescribeRuleResponse instance

Describes the specified rule.

DescribeRule does not list the targets of a rule. To see the targets associated with a rule, use ListTargetsByRule.

DisableRule

Name => Str

[EventBusName => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::DisableRule

Returns: nothing

Disables the specified rule. A disabled rule won't match any events, and won't self-trigger if it has a schedule expression.

When you disable a rule, incoming events might continue to match to the disabled rule. Allow a short period of time for changes to take effect.

EnableRule

Name => Str

[EventBusName => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::EnableRule

Returns: nothing

Enables the specified rule. If the rule does not exist, the operation fails.

When you enable a rule, incoming events might not immediately start matching to a newly enabled rule. Allow a short period of time for changes to take effect.

ListApiDestinations

[ConnectionArn => Str]

[Limit => Int]

[NamePrefix => Str]

[NextToken => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::ListApiDestinations

Returns: a Paws::CloudWatchEvents::ListApiDestinationsResponse instance

Retrieves a list of API destination in the account in the current Region.

ListArchives

[EventSourceArn => Str]

[Limit => Int]

[NamePrefix => Str]

[NextToken => Str]

[State => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::ListArchives

Returns: a Paws::CloudWatchEvents::ListArchivesResponse instance

Lists your archives. You can either list all the archives or you can provide a prefix to match to the archive names. Filter parameters are exclusive.

ListConnections

[ConnectionState => Str]

[Limit => Int]

[NamePrefix => Str]

[NextToken => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::ListConnections

Returns: a Paws::CloudWatchEvents::ListConnectionsResponse instance

Retrieves a list of connections from the account.

ListEventBuses

[Limit => Int]

[NamePrefix => Str]

[NextToken => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::ListEventBuses

Returns: a Paws::CloudWatchEvents::ListEventBusesResponse instance

Lists all the event buses in your account, including the default event bus, custom event buses, and partner event buses.

ListEventSources

[Limit => Int]

[NamePrefix => Str]

[NextToken => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::ListEventSources

Returns: a Paws::CloudWatchEvents::ListEventSourcesResponse instance

You can use this to see all the partner event sources that have been shared with your AWS account. For more information about partner event sources, see CreateEventBus.

ListPartnerEventSourceAccounts

EventSourceName => Str

[Limit => Int]

[NextToken => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::ListPartnerEventSourceAccounts

Returns: a Paws::CloudWatchEvents::ListPartnerEventSourceAccountsResponse instance

An SaaS partner can use this operation to display the AWS account ID that a particular partner event source name is associated with. This operation is not used by AWS customers.

ListPartnerEventSources

NamePrefix => Str

[Limit => Int]

[NextToken => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::ListPartnerEventSources

Returns: a Paws::CloudWatchEvents::ListPartnerEventSourcesResponse instance

An SaaS partner can use this operation to list all the partner event source names that they have created. This operation is not used by AWS customers.

ListReplays

[EventSourceArn => Str]

[Limit => Int]

[NamePrefix => Str]

[NextToken => Str]

[State => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::ListReplays

Returns: a Paws::CloudWatchEvents::ListReplaysResponse instance

Lists your replays. You can either list all the replays or you can provide a prefix to match to the replay names. Filter parameters are exclusive.

ListRuleNamesByTarget

TargetArn => Str

[EventBusName => Str]

[Limit => Int]

[NextToken => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::ListRuleNamesByTarget

Returns: a Paws::CloudWatchEvents::ListRuleNamesByTargetResponse instance

Lists the rules for the specified target. You can see which of the rules in Amazon EventBridge can invoke a specific target in your account.

ListRules

[EventBusName => Str]

[Limit => Int]

[NamePrefix => Str]

[NextToken => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::ListRules

Returns: a Paws::CloudWatchEvents::ListRulesResponse instance

Lists your Amazon EventBridge rules. You can either list all the rules or you can provide a prefix to match to the rule names.

ListRules does not list the targets of a rule. To see the targets associated with a rule, use ListTargetsByRule.

ListTagsForResource

ResourceARN => Str

Each argument is described in detail in: Paws::CloudWatchEvents::ListTagsForResource

Returns: a Paws::CloudWatchEvents::ListTagsForResourceResponse instance

Displays the tags associated with an EventBridge resource. In EventBridge, rules and event buses can be tagged.

ListTargetsByRule

Rule => Str

[EventBusName => Str]

[Limit => Int]

[NextToken => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::ListTargetsByRule

Returns: a Paws::CloudWatchEvents::ListTargetsByRuleResponse instance

Lists the targets assigned to the specified rule.

PutEvents

Entries => ArrayRef[Paws::CloudWatchEvents::PutEventsRequestEntry]

Each argument is described in detail in: Paws::CloudWatchEvents::PutEvents

Returns: a Paws::CloudWatchEvents::PutEventsResponse instance

Sends custom events to Amazon EventBridge so that they can be matched to rules.

PutPartnerEvents

Entries => ArrayRef[Paws::CloudWatchEvents::PutPartnerEventsRequestEntry]

Each argument is described in detail in: Paws::CloudWatchEvents::PutPartnerEvents

Returns: a Paws::CloudWatchEvents::PutPartnerEventsResponse instance

This is used by SaaS partners to write events to a customer's partner event bus. AWS customers do not use this operation.

PutPermission

[Action => Str]

[Condition => Paws::CloudWatchEvents::Condition]

[EventBusName => Str]

[Policy => Str]

[Principal => Str]

[StatementId => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::PutPermission

Returns: nothing

Running "PutPermission" permits the specified AWS account or AWS organization to put events to the specified event bus. Amazon EventBridge (CloudWatch Events) rules in your account are triggered by these events arriving to an event bus in your account.

For another account to send events to your account, that external account must have an EventBridge rule with your account's event bus as a target.

To enable multiple AWS accounts to put events to your event bus, run "PutPermission" once for each of these accounts. Or, if all the accounts are members of the same AWS organization, you can run "PutPermission" once specifying "Principal" as "*" and specifying the AWS organization ID in "Condition", to grant permissions to all accounts in that organization.

If you grant permissions using an organization, then accounts in that organization must specify a "RoleArn" with proper permissions when they use "PutTarget" to add your account's event bus as a target. For more information, see Sending and Receiving Events Between AWS Accounts (https://docs.aws.amazon.com/eventbridge/latest/userguide/eventbridge-cross-account-event-delivery.html) in the Amazon EventBridge User Guide.

The permission policy on the default event bus cannot exceed 10 KB in size.

PutRule

Name => Str

[Description => Str]

[EventBusName => Str]

[EventPattern => Str]

[RoleArn => Str]

[ScheduleExpression => Str]

[State => Str]

[Tags => ArrayRef[Paws::CloudWatchEvents::Tag]]

Each argument is described in detail in: Paws::CloudWatchEvents::PutRule

Returns: a Paws::CloudWatchEvents::PutRuleResponse instance

Creates or updates the specified rule. Rules are enabled by default, or based on value of the state. You can disable a rule using DisableRule.

A single rule watches for events from a single event bus. Events generated by AWS services go to your account's default event bus. Events generated by SaaS partner services or applications go to the matching partner event bus. If you have custom applications or services, you can specify whether their events go to your default event bus or a custom event bus that you have created. For more information, see CreateEventBus.

If you are updating an existing rule, the rule is replaced with what you specify in this "PutRule" command. If you omit arguments in "PutRule", the old values for those arguments are not kept. Instead, they are replaced with null values.

When you create or update a rule, incoming events might not immediately start matching to new or updated rules. Allow a short period of time for changes to take effect.

A rule must contain at least an EventPattern or ScheduleExpression. Rules with EventPatterns are triggered when a matching event is observed. Rules with ScheduleExpressions self-trigger based on the given schedule. A rule can have both an EventPattern and a ScheduleExpression, in which case the rule triggers on matching events as well as on a schedule.

When you initially create a rule, you can optionally assign one or more tags to the rule. Tags can help you organize and categorize your resources. You can also use them to scope user permissions, by granting a user permission to access or change only rules with certain tag values. To use the "PutRule" operation and assign tags, you must have both the "events:PutRule" and "events:TagResource" permissions.

If you are updating an existing rule, any tags you specify in the "PutRule" operation are ignored. To update the tags of an existing rule, use TagResource and UntagResource.

Most services in AWS treat : or / as the same character in Amazon Resource Names (ARNs). However, EventBridge uses an exact match in event patterns and rules. Be sure to use the correct ARN characters when creating event patterns so that they match the ARN syntax in the event you want to match.

In EventBridge, it is possible to create rules that lead to infinite loops, where a rule is fired repeatedly. For example, a rule might detect that ACLs have changed on an S3 bucket, and trigger software to change them to the desired state. If the rule is not written carefully, the subsequent change to the ACLs fires the rule again, creating an infinite loop.

To prevent this, write the rules so that the triggered actions do not re-fire the same rule. For example, your rule could fire only if ACLs are found to be in a bad state, instead of after any change.

An infinite loop can quickly cause higher than expected charges. We recommend that you use budgeting, which alerts you when charges exceed your specified limit. For more information, see Managing Your Costs with Budgets (https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/budgets-managing-costs.html).

PutTargets

Rule => Str

Targets => ArrayRef[Paws::CloudWatchEvents::Target]

[EventBusName => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::PutTargets

Returns: a Paws::CloudWatchEvents::PutTargetsResponse instance

Adds the specified targets to the specified rule, or updates the targets if they are already associated with the rule.

Targets are the resources that are invoked when a rule is triggered.

You can configure the following as targets for Events:

• API destination (https://docs.aws.amazon.com/eventbridge/latest/userguide/eb-api-destinations.html)
• Amazon API Gateway REST API endpoints
• API Gateway
• AWS Batch job queue
• CloudWatch Logs group
• CodeBuild project
• CodePineline
• Amazon EC2 "CreateSnapshot" API call
• Amazon EC2 "RebootInstances" API call
• Amazon EC2 "StopInstances" API call
• Amazon EC2 "TerminateInstances" API call
• Amazon ECS tasks
• Event bus in a different AWS account or Region.

  You can use an event bus in the US East (N. Virginia) us-east-1, US West (Oregon) us-west-2, or Europe (Ireland) eu-west-1 Regions as a target for a rule.

• Firehose delivery stream (Kinesis Data Firehose)
• Inspector assessment template (Amazon Inspector)
• Kinesis stream (Kinesis Data Stream)
• AWS Lambda function
• Redshift clusters (Data API statement execution)
• Amazon SNS topic
• Amazon SQS queues (includes FIFO queues
• SSM Automation
• SSM OpsItem
• SSM Run Command
• Step Functions state machines

Creating rules with built-in targets is supported only in the AWS Management Console. The built-in targets are "EC2 CreateSnapshot API call", "EC2 RebootInstances API call", "EC2 StopInstances API call", and "EC2 TerminateInstances API call".

For some target types, "PutTargets" provides target-specific parameters. If the target is a Kinesis data stream, you can optionally specify which shard the event goes to by using the "KinesisParameters" argument. To invoke a command on multiple EC2 instances with one rule, you can use the "RunCommandParameters" field.

To be able to make API calls against the resources that you own, Amazon EventBridge (CloudWatch Events) needs the appropriate permissions. For AWS Lambda and Amazon SNS resources, EventBridge relies on resource-based policies. For EC2 instances, Kinesis data streams, AWS Step Functions state machines and API Gateway REST APIs, EventBridge relies on IAM roles that you specify in the "RoleARN" argument in "PutTargets". For more information, see Authentication and Access Control (https://docs.aws.amazon.com/eventbridge/latest/userguide/auth-and-access-control-eventbridge.html) in the Amazon EventBridge User Guide.

If another AWS account is in the same region and has granted you permission (using "PutPermission"), you can send events to that account. Set that account's event bus as a target of the rules in your account. To send the matched events to the other account, specify that account's event bus as the "Arn" value when you run "PutTargets". If your account sends events to another account, your account is charged for each sent event. Each event sent to another account is charged as a custom event. The account receiving the event is not charged. For more information, see Amazon EventBridge (CloudWatch Events) Pricing (https://aws.amazon.com/eventbridge/pricing/).

"Input", "InputPath", and "InputTransformer" are not available with "PutTarget" if the target is an event bus of a different AWS account.

If you are setting the event bus of another account as the target, and that account granted permission to your account through an organization instead of directly by the account ID, then you must specify a "RoleArn" with proper permissions in the "Target" structure. For more information, see Sending and Receiving Events Between AWS Accounts (https://docs.aws.amazon.com/eventbridge/latest/userguide/eventbridge-cross-account-event-delivery.html) in the Amazon EventBridge User Guide.

For more information about enabling cross-account events, see PutPermission.

Input, InputPath, and InputTransformer are mutually exclusive and optional parameters of a target. When a rule is triggered due to a matched event:

• If none of the following arguments are specified for a target, then the entire event is passed to the target in JSON format (unless the target is Amazon EC2 Run Command or Amazon ECS task, in which case nothing from the event is passed to the target).
• If Input is specified in the form of valid JSON, then the matched event is overridden with this constant.
• If InputPath is specified in the form of JSONPath (for example, "$.detail"), then only the part of the event specified in the path is passed to the target (for example, only the detail part of the event is passed).
• If InputTransformer is specified, then one or more specified JSONPaths are extracted from the event and used as values in a template that you specify as the input to the target.

When you specify "InputPath" or "InputTransformer", you must use JSON dot notation, not bracket notation.

When you add targets to a rule and the associated rule triggers soon after, new or updated targets might not be immediately invoked. Allow a short period of time for changes to take effect.

This action can partially fail if too many requests are made at the same time. If that happens, "FailedEntryCount" is non-zero in the response and each entry in "FailedEntries" provides the ID of the failed target and the error code.

RemovePermission

[EventBusName => Str]

[RemoveAllPermissions => Bool]

[StatementId => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::RemovePermission

Returns: nothing

Revokes the permission of another AWS account to be able to put events to the specified event bus. Specify the account to revoke by the "StatementId" value that you associated with the account when you granted it permission with "PutPermission". You can find the "StatementId" by using DescribeEventBus.

RemoveTargets

Ids => ArrayRef[Str|Undef]

Rule => Str

[EventBusName => Str]

[Force => Bool]

Each argument is described in detail in: Paws::CloudWatchEvents::RemoveTargets

Returns: a Paws::CloudWatchEvents::RemoveTargetsResponse instance

Removes the specified targets from the specified rule. When the rule is triggered, those targets are no longer be invoked.

When you remove a target, when the associated rule triggers, removed targets might continue to be invoked. Allow a short period of time for changes to take effect.

This action can partially fail if too many requests are made at the same time. If that happens, "FailedEntryCount" is non-zero in the response and each entry in "FailedEntries" provides the ID of the failed target and the error code.

StartReplay

Destination => Paws::CloudWatchEvents::ReplayDestination

EventEndTime => Str

EventSourceArn => Str

EventStartTime => Str

ReplayName => Str

[Description => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::StartReplay

Returns: a Paws::CloudWatchEvents::StartReplayResponse instance

Starts the specified replay. Events are not necessarily replayed in the exact same order that they were added to the archive. A replay processes events to replay based on the time in the event, and replays them using 1 minute intervals. If you specify an "EventStartTime" and an "EventEndTime" that covers a 20 minute time range, the events are replayed from the first minute of that 20 minute range first. Then the events from the second minute are replayed. You can use "DescribeReplay" to determine the progress of a replay. The value returned for "EventLastReplayedTime" indicates the time within the specified time range associated with the last event replayed.

TagResource

ResourceARN => Str

Tags => ArrayRef[Paws::CloudWatchEvents::Tag]

Each argument is described in detail in: Paws::CloudWatchEvents::TagResource

Returns: a Paws::CloudWatchEvents::TagResourceResponse instance

Assigns one or more tags (key-value pairs) to the specified EventBridge resource. Tags can help you organize and categorize your resources. You can also use them to scope user permissions by granting a user permission to access or change only resources with certain tag values. In EventBridge, rules and event buses can be tagged.

Tags don't have any semantic meaning to AWS and are interpreted strictly as strings of characters.

You can use the "TagResource" action with a resource that already has tags. If you specify a new tag key, this tag is appended to the list of tags associated with the resource. If you specify a tag key that is already associated with the resource, the new tag value that you specify replaces the previous value for that tag.

You can associate as many as 50 tags with a resource.

TestEventPattern

Event => Str

EventPattern => Str

Each argument is described in detail in: Paws::CloudWatchEvents::TestEventPattern

Returns: a Paws::CloudWatchEvents::TestEventPatternResponse instance

Tests whether the specified event pattern matches the provided event.

Most services in AWS treat : or / as the same character in Amazon Resource Names (ARNs). However, EventBridge uses an exact match in event patterns and rules. Be sure to use the correct ARN characters when creating event patterns so that they match the ARN syntax in the event you want to match.

UntagResource

ResourceARN => Str

TagKeys => ArrayRef[Str|Undef]

Each argument is described in detail in: Paws::CloudWatchEvents::UntagResource

Returns: a Paws::CloudWatchEvents::UntagResourceResponse instance

Removes one or more tags from the specified EventBridge resource. In Amazon EventBridge (CloudWatch Events), rules and event buses can be tagged.

UpdateApiDestination

Name => Str

[ConnectionArn => Str]

[Description => Str]

[HttpMethod => Str]

[InvocationEndpoint => Str]

[InvocationRateLimitPerSecond => Int]

Each argument is described in detail in: Paws::CloudWatchEvents::UpdateApiDestination

Returns: a Paws::CloudWatchEvents::UpdateApiDestinationResponse instance

Updates an API destination.

UpdateArchive

ArchiveName => Str

[Description => Str]

[EventPattern => Str]

[RetentionDays => Int]

Each argument is described in detail in: Paws::CloudWatchEvents::UpdateArchive

Returns: a Paws::CloudWatchEvents::UpdateArchiveResponse instance

Updates the specified archive.

UpdateConnection

Name => Str

[AuthorizationType => Str]

[AuthParameters => Paws::CloudWatchEvents::UpdateConnectionAuthRequestParameters]

[Description => Str]

Each argument is described in detail in: Paws::CloudWatchEvents::UpdateConnection

Returns: a Paws::CloudWatchEvents::UpdateConnectionResponse instance

Updates settings for a connection.

ListAllRuleNamesByTarget(sub { },TargetArn => Str, [EventBusName => Str, Limit => Int, NextToken => Str])

ListAllRuleNamesByTarget(TargetArn => Str, [EventBusName => Str, Limit => Int, NextToken => Str])

If passed a sub as first parameter, it will call the sub for each element found in :

 - RuleNames, passing the object as the first parameter, and the string 'RuleNames' as the second parameter

If not, it will return a a Paws::CloudWatchEvents::ListRuleNamesByTargetResponse instance with all the "param"s; from all the responses. Please take into account that this mode can potentially consume vasts ammounts of memory.

ListAllRules(sub { },[EventBusName => Str, Limit => Int, NamePrefix => Str, NextToken => Str])

ListAllRules([EventBusName => Str, Limit => Int, NamePrefix => Str, NextToken => Str])

If passed a sub as first parameter, it will call the sub for each element found in :

 - Rules, passing the object as the first parameter, and the string 'Rules' as the second parameter

If not, it will return a a Paws::CloudWatchEvents::ListRulesResponse instance with all the "param"s; from all the responses. Please take into account that this mode can potentially consume vasts ammounts of memory.

ListAllTargetsByRule(sub { },Rule => Str, [EventBusName => Str, Limit => Int, NextToken => Str])

ListAllTargetsByRule(Rule => Str, [EventBusName => Str, Limit => Int, NextToken => Str])

If passed a sub as first parameter, it will call the sub for each element found in :

 - Targets, passing the object as the first parameter, and the string 'Targets' as the second parameter

If not, it will return a a Paws::CloudWatchEvents::ListTargetsByRuleResponse instance with all the "param"s; from all the responses. Please take into account that this mode can potentially consume vasts ammounts of memory.