GSP
Quick Navigator
Search Site

Unix VPS
A - Starter
B - Basic
C - Preferred
D - Commercial
MPS - Dedicated
* Sign Up! *

Support
Customer Portal
Contact Us
Online Help
Handbooks
Domain Status
Man Pages

FAQ
Virtual Servers
Pricing
Billing
Technical

Network
Facilities
Connectivity
Topology Map

Miscellaneous
Server Agreement
Year 2038
Credits
 

USA Flag

 

 

Man Pages
rte_bbdev.h(3) DPDK rte_bbdev.h(3)

rte_bbdev.h

#include <stdint.h>
#include <stdbool.h>
#include <rte_compat.h>
#include <rte_cpuflags.h>
#include 'rte_bbdev_op.h'
#include 'rte_bbdev_trace_fp.h'


struct rte_bbdev_queue_conf
struct rte_bbdev_stats
struct rte_bbdev_driver_info
struct rte_bbdev_info
struct rte_bbdev_queue_info


#define RTE_BBDEV_MAX_DEVS 128
#define RTE_BBDEV_FOREACH(i)
#define RTE_BBDEV_END_OF_CAPABILITIES_LIST() { RTE_BBDEV_OP_NONE }
#define RTE_BBDEV_NAME_MAX_LEN 64


typedef void(* rte_bbdev_cb_fn) (uint16_t dev_id, enum rte_bbdev_event_type event, void *cb_arg, void *ret_param)


enum rte_bbdev_state
enum rte_bbdev_enqueue_status { RTE_BBDEV_ENQ_STATUS_NONE, RTE_BBDEV_ENQ_STATUS_QUEUE_FULL, RTE_BBDEV_ENQ_STATUS_RING_FULL, RTE_BBDEV_ENQ_STATUS_INVALID_OP }
enum rte_bbdev_device_status { RTE_BBDEV_DEV_NOSTATUS, RTE_BBDEV_DEV_NOT_SUPPORTED, RTE_BBDEV_DEV_RESET, RTE_BBDEV_DEV_CONFIGURED, RTE_BBDEV_DEV_ACTIVE, RTE_BBDEV_DEV_FATAL_ERR, RTE_BBDEV_DEV_RESTART_REQ, RTE_BBDEV_DEV_RECONFIG_REQ, RTE_BBDEV_DEV_CORRECT_ERR }
enum rte_bbdev_event_type { RTE_BBDEV_EVENT_UNKNOWN, RTE_BBDEV_EVENT_ERROR, RTE_BBDEV_EVENT_DEQUEUE, RTE_BBDEV_EVENT_MAX }


uint16_t rte_bbdev_count (void)
bool rte_bbdev_is_valid (uint16_t dev_id)
uint16_t rte_bbdev_find_next (uint16_t dev_id)
int rte_bbdev_setup_queues (uint16_t dev_id, uint16_t num_queues, int socket_id)
int rte_bbdev_intr_enable (uint16_t dev_id)
int rte_bbdev_queue_configure (uint16_t dev_id, uint16_t queue_id, const struct rte_bbdev_queue_conf *conf)
int rte_bbdev_start (uint16_t dev_id)
int rte_bbdev_stop (uint16_t dev_id)
int rte_bbdev_close (uint16_t dev_id)
int rte_bbdev_queue_start (uint16_t dev_id, uint16_t queue_id)
int rte_bbdev_queue_stop (uint16_t dev_id, uint16_t queue_id)
int rte_bbdev_stats_get (uint16_t dev_id, struct rte_bbdev_stats *stats)
int rte_bbdev_stats_reset (uint16_t dev_id)
int rte_bbdev_info_get (uint16_t dev_id, struct rte_bbdev_info *dev_info)
int rte_bbdev_queue_info_get (uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_queue_info *queue_info)
RTE_TAILQ_HEAD (rte_bbdev_cb_list, rte_bbdev_callback)
static uint16_t rte_bbdev_enqueue_enc_ops (uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_enc_op **ops, uint16_t num_ops)
static uint16_t rte_bbdev_enqueue_dec_ops (uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_dec_op **ops, uint16_t num_ops)
static uint16_t rte_bbdev_enqueue_ldpc_enc_ops (uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_enc_op **ops, uint16_t num_ops)
static uint16_t rte_bbdev_enqueue_ldpc_dec_ops (uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_dec_op **ops, uint16_t num_ops)
static uint16_t rte_bbdev_enqueue_fft_ops (uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_fft_op **ops, uint16_t num_ops)
static uint16_t rte_bbdev_enqueue_mldts_ops (uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_mldts_op **ops, uint16_t num_ops)
static uint16_t rte_bbdev_dequeue_enc_ops (uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_enc_op **ops, uint16_t num_ops)
static uint16_t rte_bbdev_dequeue_dec_ops (uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_dec_op **ops, uint16_t num_ops)
static uint16_t rte_bbdev_dequeue_ldpc_enc_ops (uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_enc_op **ops, uint16_t num_ops)
static uint16_t rte_bbdev_dequeue_ldpc_dec_ops (uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_dec_op **ops, uint16_t num_ops)
static uint16_t rte_bbdev_dequeue_fft_ops (uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_fft_op **ops, uint16_t num_ops)
static uint16_t rte_bbdev_dequeue_mldts_ops (uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_mldts_op **ops, uint16_t num_ops)
int rte_bbdev_callback_register (uint16_t dev_id, enum rte_bbdev_event_type event, rte_bbdev_cb_fn cb_fn, void *cb_arg)
int rte_bbdev_callback_unregister (uint16_t dev_id, enum rte_bbdev_event_type event, rte_bbdev_cb_fn cb_fn, void *cb_arg)
int rte_bbdev_queue_intr_enable (uint16_t dev_id, uint16_t queue_id)
int rte_bbdev_queue_intr_disable (uint16_t dev_id, uint16_t queue_id)
int rte_bbdev_queue_intr_ctl (uint16_t dev_id, uint16_t queue_id, int epfd, int op, void *data)
const char * rte_bbdev_device_status_str (enum rte_bbdev_device_status status)
const char * rte_bbdev_enqueue_status_str (enum rte_bbdev_enqueue_status status)
__rte_experimental int rte_bbdev_queue_ops_dump (uint16_t dev_id, uint16_t queue_index, FILE *file)
__rte_experimental char * rte_bbdev_ops_param_string (void *op, enum rte_bbdev_op_type op_type, char *str, uint32_t len)
__rte_experimental void rte_bbdev_ops_trace (void *op, enum rte_bbdev_op_type op_type)

Wireless base band device abstraction APIs.

This API allows an application to discover, configure and use a device to process operations. An asynchronous API (enqueue, followed by later dequeue) is used for processing operations.

The functions in this API are not thread-safe when called on the same target object (a device, or a queue on a device), with the exception that one thread can enqueue operations to a queue while another thread dequeues from the same queue.

Definition in file rte_bbdev.h.

Max number of devices

Definition at line 38 of file rte_bbdev.h.

Value:.PP



        for (i = rte_bbdev_find_next(-1); \


        i < RTE_BBDEV_MAX_DEVS; \


        i = rte_bbdev_find_next(i))

Iterate through all enabled devices

Definition at line 89 of file rte_bbdev.h.

Macro used at end of bbdev PMD list

Definition at line 364 of file rte_bbdev.h.

Max length of device name

Definition at line 479 of file rte_bbdev.h.

typedef void(* rte_bbdev_cb_fn) (uint16_t dev_id, enum rte_bbdev_event_type event, void *cb_arg, void *ret_param)

Typedef for application callback function registered by application software for notification of device events

Parameters

dev_id Device identifier
event Device event to register for notification of.
cb_arg User specified parameter to be passed to user's callback function.
ret_param To pass data back to user application.

Definition at line 968 of file rte_bbdev.h.

enum rte_bbdev_state

Flags indicate current state of BBDEV device

Definition at line 49 of file rte_bbdev.h.

enum rte_bbdev_enqueue_status

Flags to indicate the reason why a previous enqueue may not have consumed all requested operations. In case of multiple reasons the latter supersedes a previous one. The related macro RTE_BBDEV_ENQ_STATUS_SIZE_MAX can be used as an absolute maximum for notably sizing array while allowing for future enumeration insertion.

Enumerator

Nothing to report.
Not enough room in queue.
Not enough room in ring.
Operation was rejected as invalid.

Definition at line 244 of file rte_bbdev.h.

enum rte_bbdev_device_status

Flags to indicate the status of the device.

Enumerator

Nothing being reported.
Device status is not supported on the PMD.
Device in reset and un-configured state.
Device is configured and ready to use.
Device is configured and VF is being used.
Device has hit a fatal uncorrectable error.
Device requires application to restart.
Device requires application to reconfigure queues.
Warning of a correctable error event happened.

Definition at line 255 of file rte_bbdev.h.

enum rte_bbdev_event_type

Definitions of device event types

Enumerator

unknown event type
error interrupt event
dequeue event
max value of this enum

Definition at line 948 of file rte_bbdev.h.

Get the total number of devices that have been successfully initialised.

Returns

The total number of usable devices.

Check if a device is valid.

Parameters

dev_id The identifier of the device.

Returns

true if device ID is valid and device is attached, false otherwise.

Get the next enabled device.

Parameters

dev_id The current device

Returns

  • The next device, or
  • RTE_BBDEV_MAX_DEVS if none found

Setup up device queues. This function must be called on a device before setting up the queues and starting the device. It can also be called when a device is in the stopped state. If any device queues have been configured their configuration will be cleared by a call to this function.

Parameters

dev_id The identifier of the device.
num_queues Number of queues to configure on device.
socket_id ID of a socket which will be used to allocate memory.

Returns

  • 0 on success
  • -ENODEV if dev_id is invalid or the device is corrupted
  • -EINVAL if num_queues is invalid, 0 or greater than maximum
  • -EBUSY if the identified device has already started
  • -ENOMEM if unable to allocate memory

Enable interrupts. This function may be called before starting the device to enable the interrupts if they are available.

Parameters

dev_id The identifier of the device.

Returns

  • 0 on success
  • -ENODEV if dev_id is invalid or the device is corrupted
  • -EBUSY if the identified device has already started
  • -ENOTSUP if the interrupts are not supported by the device

Configure a queue on a device. This function can be called after device configuration, and before starting. It can also be called when the device or the queue is in the stopped state.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
conf The queue configuration. If NULL, a default configuration will be used.

Returns

  • 0 on success
  • EINVAL if the identified queue size or priority are invalid
  • EBUSY if the identified queue or its device have already started

Start a device. This is the last step needed before enqueueing operations is possible.

Parameters

dev_id The identifier of the device.

Returns

  • 0 on success
  • negative value on failure - as returned from PMD

Stop a device. The device can be reconfigured, and restarted after being stopped.

Parameters

dev_id The identifier of the device.

Returns

•
0 on success

Close a device. The device cannot be restarted without reconfiguration!

Parameters

dev_id The identifier of the device.

Returns

•
0 on success

Start a specified queue on a device. This is only needed if the queue has been stopped, or if the deferred_start flag has been set when configuring the queue.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.

Returns

  • 0 on success
  • negative value on failure - as returned from PMD

Stop a specified queue on a device, to allow re configuration.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.

Returns

  • 0 on success
  • negative value on failure - as returned from PMD

Retrieve the general I/O statistics of a device.

Parameters

dev_id The identifier of the device.
stats Pointer to structure to where statistics will be copied. On error, this location may or may not have been modified.

Returns

  • 0 on success
  • EINVAL if invalid parameter pointer is provided

Reset the statistics of a device.

Parameters

dev_id The identifier of the device.

Returns

•
0 on success

Retrieve information about a device.

Parameters

dev_id The identifier of the device.
dev_info Pointer to structure to where information will be copied. On error, this location may or may not have been modified.

Returns

  • 0 on success
  • EINVAL if invalid parameter pointer is provided

Retrieve information about a specific queue on a device.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
queue_info Pointer to structure to where information will be copied. On error, this location may or may not have been modified.

Returns

  • 0 on success
  • EINVAL if invalid parameter pointer is provided

Structure to keep track of registered callbacks

Enqueue a burst of processed encode operations to a queue of the device. This functions only enqueues as many operations as currently possible and does not block until num_ops entries in the queue are available. This function does not provide any error notification to avoid the corresponding overhead.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
ops Pointer array containing operations to be enqueued Must have at least num_ops entries
num_ops The maximum number of operations to enqueue.

Returns

The number of operations actually enqueued (this is the number of processed entries in the ops array).

Definition at line 569 of file rte_bbdev.h.

Enqueue a burst of processed decode operations to a queue of the device. This functions only enqueues as many operations as currently possible and does not block until num_ops entries in the queue are available. This function does not provide any error notification to avoid the corresponding overhead.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
ops Pointer array containing operations to be enqueued Must have at least num_ops entries
num_ops The maximum number of operations to enqueue.

Returns

The number of operations actually enqueued (this is the number of processed entries in the ops array).

Definition at line 601 of file rte_bbdev.h.

Enqueue a burst of processed encode operations to a queue of the device. This functions only enqueues as many operations as currently possible and does not block until num_ops entries in the queue are available. This function does not provide any error notification to avoid the corresponding overhead.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
ops Pointer array containing operations to be enqueued Must have at least num_ops entries
num_ops The maximum number of operations to enqueue.

Returns

The number of operations actually enqueued (this is the number of processed entries in the ops array).

Definition at line 633 of file rte_bbdev.h.

Enqueue a burst of processed decode operations to a queue of the device. This functions only enqueues as many operations as currently possible and does not block until num_ops entries in the queue are available. This function does not provide any error notification to avoid the corresponding overhead.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
ops Pointer array containing operations to be enqueued Must have at least num_ops entries
num_ops The maximum number of operations to enqueue.

Returns

The number of operations actually enqueued (this is the number of processed entries in the ops array).

Definition at line 665 of file rte_bbdev.h.

Enqueue a burst of FFT operations to a queue of the device. This functions only enqueues as many operations as currently possible and does not block until num_ops entries in the queue are available. This function does not provide any error notification to avoid the corresponding overhead.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
ops Pointer array containing operations to be enqueued. Must have at least num_ops entries.
num_ops The maximum number of operations to enqueue.

Returns

The number of operations actually enqueued. (This is the number of processed entries in the ops array.)

Definition at line 697 of file rte_bbdev.h.

Enqueue a burst of MLDTS operations to a queue of the device. This functions only enqueues as many operations as currently possible and does not block until num_ops entries in the queue are available. This function does not provide any error notification to avoid the corresponding overhead.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
ops Pointer array containing operations to be enqueued Must have at least num_ops entries
num_ops The maximum number of operations to enqueue.

Returns

The number of operations actually enqueued (this is the number of processed entries in the ops array).

Definition at line 729 of file rte_bbdev.h.

Dequeue a burst of processed encode operations from a queue of the device. This functions returns only the current contents of the queue, and does not block until @ num_ops is available. This function does not provide any error notification to avoid the corresponding overhead.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
ops Pointer array where operations will be dequeued to. Must have at least num_ops entries, i.e. a pointer to a table of void * pointers (ops) that will be filled.
num_ops The maximum number of operations to dequeue.

Returns

The number of operations actually dequeued. (This is the number of entries copied into the ops array.)

Definition at line 762 of file rte_bbdev.h.

Dequeue a burst of processed decode operations from a queue of the device. This functions returns only the current contents of the queue, and does not block until @ num_ops is available. This function does not provide any error notification to avoid the corresponding overhead.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
ops Pointer array where operations will be dequeued to. Must have at least num_ops entries ie. A pointer to a table of void * pointers (ops) that will be filled.
num_ops The maximum number of operations to dequeue.

Returns

The number of operations actually dequeued (this is the number of entries copied into the ops array).

Definition at line 798 of file rte_bbdev.h.

Dequeue a burst of processed encode operations from a queue of the device. This functions returns only the current contents of the queue, and does not block until @ num_ops is available. This function does not provide any error notification to avoid the corresponding overhead.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
ops Pointer array where operations will be dequeued to. Must have at least num_ops entries
num_ops The maximum number of operations to dequeue.

Returns

The number of operations actually dequeued (this is the number of entries copied into the ops array).

Definition at line 833 of file rte_bbdev.h.

Dequeue a burst of processed decode operations from a queue of the device. This functions returns only the current contents of the queue, and does not block until @ num_ops is available. This function does not provide any error notification to avoid the corresponding overhead.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
ops Pointer array where operations will be dequeued to. Must have at least num_ops entries
num_ops The maximum number of operations to dequeue.

Returns

The number of operations actually dequeued (this is the number of entries copied into the ops array).

Definition at line 867 of file rte_bbdev.h.

Dequeue a burst of FFT operations from a queue of the device. This functions returns only the current contents of the queue, and does not block until @ num_ops is available. This function does not provide any error notification to avoid the corresponding overhead.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
ops Pointer array where operations will be dequeued to. Must have at least num_ops entries
num_ops The maximum number of operations to dequeue.

Returns

The number of operations actually dequeued (this is the number of entries copied into the ops array).

Definition at line 901 of file rte_bbdev.h.

Dequeue a burst of MLDTS operations from a queue of the device. This functions returns only the current contents of the queue, and does not block until num_ops is available. This function does not provide any error notification to avoid the corresponding overhead.

Parameters

dev_id The identifier of the device.
queue_id The index of the queue.
ops Pointer array where operations will be dequeued to. Must have at least num_ops entries
num_ops The maximum number of operations to dequeue.

Returns

The number of operations actually dequeued (this is the number of entries copied into the ops array).

Definition at line 935 of file rte_bbdev.h.

Register a callback function for specific device id. Multiple callbacks can be added and will be called in the order they are added when an event is triggered. Callbacks are called in a separate thread created by the DPDK EAL.

Parameters

dev_id Device id.
event The event that the callback will be registered for.
cb_fn User supplied callback function to be called.
cb_arg Pointer to parameter that will be passed to the callback.

Returns

Zero on success, negative value on failure.

Unregister a callback function for specific device id.

Parameters

dev_id The device identifier.
event The event that the callback will be unregistered for.
cb_fn User supplied callback function to be unregistered.
cb_arg Pointer to the parameter supplied when registering the callback. (void *)-1 means to remove all registered callbacks with the specified function address.

Returns

  • 0 on success
  • EINVAL if invalid parameter pointer is provided
  • EAGAIN if the provided callback pointer does not exist

Enable a one-shot interrupt on the next operation enqueued to a particular queue. The interrupt will be triggered when the operation is ready to be dequeued. To handle the interrupt, an epoll file descriptor must be registered using rte_bbdev_queue_intr_ctl(), and then an application thread/lcore can wait for the interrupt using rte_epoll_wait().

Parameters

dev_id The device identifier.
queue_id The index of the queue.

Returns

  • 0 on success
  • negative value on failure - as returned from PMD

Disable a one-shot interrupt on the next operation enqueued to a particular queue (if it has been enabled).

Parameters

dev_id The device identifier.
queue_id The index of the queue.

Returns

  • 0 on success
  • negative value on failure - as returned from PMD

Control interface for per-queue interrupts.

Parameters

dev_id The device identifier.
queue_id The index of the queue.
epfd Epoll file descriptor that will be associated with the interrupt source. If the special value RTE_EPOLL_PER_THREAD is provided, a per thread epoll file descriptor created by the EAL is used (RTE_EPOLL_PER_THREAD can also be used when calling rte_epoll_wait()).
op The operation be performed for the vector.RTE_INTR_EVENT_ADD or RTE_INTR_EVENT_DEL.
data User context, that will be returned in the epdata.data field of the rte_epoll_event structure filled in by rte_epoll_wait().

Returns

  • 0 on success
  • ENOTSUP if interrupts are not supported by the identified device
  • negative value on failure - as returned from PMD

Convert device status from enum to string.

Parameters

status Device status as enum.

Returns

Device status as string or NULL if invalid.

Convert queue status from enum to string.

Parameters

status Queue status as enum.

Returns

Queue status as string or NULL if op_type is invalid.

Dump operations info from device to a file. This API is used for debugging provided input operations, not a dataplane API.

Parameters

dev_id The device identifier.
queue_index Index of queue.
file A pointer to a file for output.

Returns

  • 0 on success
  • ENOTSUP if interrupts are not supported by the identified device
  • negative value on failure - as returned from PMD

String of parameters related to the parameters of an operation of a given type.

Parameters

op Pointer to an operation.
op_type Operation type enum.
str String being describing the operations.
len Size of the string buffer.

Returns

String describing the provided operation.

Add a trace with detail of operation.

Parameters

op Pointer to an operation.
op_type Operation type enum.

Generated automatically by Doxygen for DPDK from the source code.

Tue Jun 30 2026 Version 25.11.0
Search for    or go to Top of page |  Section 3 |  Main Index

Powered by GSP Visit the GSP FreeBSD Man Page Interface.
Output converted with ManDoc.