NAME

ts.conf - Configuration file for tslib, controlling touch screens for embedded devices.

DESCRIPTION

The idea of tslib is to have a core library that provides standard services, and a set of plugins to manage the conversion and filtering as needed.

The plugins for a particular touchscreen are loaded automatically by the library under the control of a static configuration file, /etc/ts.conf. /etc/ts.conf gives the library basic configuration information. Each line specifies one module, and the parameters for that module. The modules are loaded in order, with the first one processing the touchscreen data first. For example:



  module_raw input


  module variance delta=30


  module dejitter delta=100


  module linear

ENVIRONMENT VARIABLES

Latest versions of the Xorg tslib input driver use hal to configure the touchscreen within Xorg. Environment variables are only needed for the tslib commands.

TSLIB_TSDEVICE

If the default touchscreen device cannot be found, set the TSLIB_TSDEVICE environment variable to the touchscreen device to use.

Default when using ts_setup(): We try to open /dev/input/ts, /dev/input/touchscreen and /dev/touchscreen/ucb1x00 and on Linux, we then scan /dev/input/event* for the first device with property INPUT_PROP_DIRECT.

TSLIB_CONSOLEDEVICE

Tslib default console device.

Default: /dev/tty

TSLIB_CALIBFILE

Stores calibration data obtained using ts_calibrate.

Default: /etc/pointercal

TSLIB_CONFFILE

Set a different location for the ts.conf configuration file itself.

Default; /etc/ts.conf.

TSLIB_FBDEVICE

Framebuffer device to use for the touchscreen support.

Default: /dev/fb0.

TSLIB_PLUGINDIR

Plugin directory for tslib.

Default: /usr/lib/$triplet/ts0/ where triplet is the MultiArch path, e.g. arm-linux-gnueabi.

MODULE PARAMETERS

dejitter

Removes jitter on the X and Y co-ordinates. This is achieved by applying a weighted smoothing filter. The latest samples have most weight; earlier samples have less weight. This allows one to achieve 1:1 input->output rate.

•delta

Squared distance between two samples ((X2-X1)^2 + (Y2-Y1)^2) that defines the quick motion threshold. If the pen moves quick, it is not feasible to smooth pen motion, besides quick motion is not precise anyway; so if quick motion is detected the module just discards the backlog and simply copies input to output.

linear

Linear scaling module, primarily used for conversion of touch screen co-ordinates to screen co-ordinates.

•rot

Rotation of touch coordinates. 0=no, 1=CW, 2=UD, 3=CCW. Default: the screen-rotation that was used with ts_calibrate (-r option).

•xyswap

Interchange the X and Y co-ordinates -- no longer used or needed if the new linear calibration utility ts_calibrate is used.

•pressure_offset

Offset applied to the pressure value. Default: 0.

•pressure_mul

Factor to multiply the pressure value with. Default: 1.

•pressure_div

Value to divide the pressure value by. Default: 1.

iir

Infinite impulse response filter. Similar to dejitter, this is a smoothing filter to remove low-level noise. There is a trade-off between noise removal (smoothing) and responsiveness. The parameters N and D specify the level of smoothing in the form of a fraction (N/D).

•N

numerator of the smoothing fraction. Default: 0.

•D

denominator of the smoothing fraction. Default: 1.

pthres

Pressure threshold filter. Given a release is always pressure 0 and a press is always >= 1, this discards samples below / above the specified pressure threshold.

•pmin

Minimum pressure value for a sample to be valid. Default: 1.

•pmax

Maximum pressure value for a sample to be valid. Default: INT_MAX.

crop

Ignore touch points outside of the framebuffer.

debounce

Simple debounce mechanism that drops input events for the specified time after a touch gesture stopped.

•drop_threshold

drop events up to this number of milliseconds after the last release event. Default: 0.

skip

Skip nhead samples after press and ntail samples before release. This should help if for the device the first or last samples are unreliable.

•nhead

Number of events to drop after pressure. Default: 1.

•ntail

Number of events to drop before release. Default: 1.

median

Similar to what the variance filter does, the median filter suppresses spikes in the gesture.

•depth

Number of samples to apply the median filter to. Default: 3.

invert

Invert values in X and/or Y direction around a given value.

•x0

X-axis (horizontal) value around which to invert. Default: 0.

•y0

Y-axis (horizontal) value around which to invert. Default: 0.

lowpass

simple exponential averaging lowpass filter

•factor

floating point values betwenn 0 and 1. Default: 0.4.

•threshold

x or y minimum distance between two samples to start applying the filter. Default: 2.

evthres

Number of samples needed from the device after considered a valid touch. This filter will drop a tapping when too little samples are between "down" and "up".

•N

Minimum number of events needed between "down" and "up". Default: 5.

variance

Tries to do it's best in order to filter out random noise coming from touchscreen ADCs. This is achieved by limiting the sample movement speed to some value (e.g. the pen is not supposed to move quicker than some threshold).

This is a greedy filter, e.g. it gives less samples on output than receives on input. There is no multitouch support for this filter.

•delta

Set the squared distance in touchscreen units between previous and current pen position (e.g. (X2-X1)^2 + (Y2-Y1)^2). This defines the criteria for determining whenever two samples are near or far to each other.

If the distance between previous and current sample is far, the sample is marked as potential noise. This doesn't mean yet that it will be discarded; if the next reading will be close to it, this will be considered just a regular quick motion event, and it will sneak to the next layer. Also, if the sample after the potential noise is far from both previously discussed samples, this is also considered a quick motion event and the sample sneaks into the output stream.

hardware support

On Linux, use the module_raw input if you can. The other raw access modules are device specific userspace drivers. If you need one of those, enable it explicitly when building tslib. The list of modules enabled by default might shrink in the future. module_raw input supports multitouch (MT) too.

module_raw	supported devices	interface	platforms	MT	how to enable
input	all with Linux evdev drivers	any (driver) /dev/input/	Linux, FreeBSD	yes	enabled by default
arctic2	IBM Arctic II	.	Linux, BSD, Hurd, Haiku	no	--enable-arctic2
collie	Sharp Zaurus SL-5000d/SL-5500	.	Linux, BSD, Hurd, Haiku	no	--enable-collie
corgi	Sharp Zaurus SL-C700	.	Linux, BSD, Hurd, Haiku	no	--enable-corgi
dmc_dus3000	DMC DUS Series (DUS3000, ...)	UART	Linux	no	--enable-dmc_dus3000
dmc	DMC (others)	.	Linux, BSD, Hurd, Haiku	no	--enable-dmc
galax	eGalax 100, 112, 210	any (driver)	Linux, BSD	no	--enable-galax
h3600	Compaq IPAQ	.	Linux, BSD, Hurd, Haiku	no	--enable-h3600
mk712	Hitachi Webpad	.	Linux, BSD, Hurd, Haiku	no	--enable-mk712
tatung	Tatung Webpad	.	Linux, BSD, Hurd, Haiku	no	--enable-tatung
touchkit	Touchkit SAT4000UR	RS232	Linux, BSD, Hurd	no	enabled by default
ucb1x00	UCB1x00 Touchscreens	.	Linux, BSD, Hurd, Haiku	no	--enable-ucb1x00
waveshare	Waveshare Touchscreens	/dev/hidrawX	Linux	no	enabled by default
cy8mrln_palmpre	in Palm Pre/Pre Plus/Pre 2	.	Linux	no	--enable-cy8mrln-palmpre
one_wire_ts_input	FriendlyARM one-wire touch screen	.	Linux	no	--enable-one-wire-ts-input
input_evdev	Linux evdev drivers (libevdev)	.	Linux	yes	--enable-input-evdev

NAME

DESCRIPTION

ENVIRONMENT VARIABLES

MODULE PARAMETERS

SEE ALSO