Local CGI support in Chawan

Headers

Local CGI scripts may send some headers that Chawan will interpret specially (and thus will not pass forward to e.g. the fetch API, etc):

• Status: interpreted as the HTTP status code.
• Cha-Control: special header, see below.

These headers must be sent before any regular headers. Headers received after a regular header or a Cha-Control: ControlDone header will be treated as regular headers.

The Cha-Control header’s value is parsed as follows:

Cha-Control-Value = Command *Parameter
Command = ALPHA *ALPHA
Parameter = SPACE *CHAR
    

In other words, it is Command [Param1] [Param2] ....

Currently available commands are:

• Connected: Takes no parameters. Must be the first reported header; it means that connection to the server has been successfully established, but no data has been received yet. When any other header is sent first, Chawan will act as if a Cha-Control: Connected header had been implicitly sent before that.
• ConnectionError: Must be the first reported header. Parameter 1 is the error code, see below. If any following parameters are given, they are concatenated to form a custom error message.

•

ControlDone: Signals that no more special headers will be sent; this means that Cha-Control and Status headers sent after this must be interpreted as regular headers (and thus e.g. will be available for JS code calling the script using the fetch API).

Following is a list of error codes and their string counterparts. CGI scripts may use either (but not both) in a ConnectionError header.

• 1 InternalError: An internal error prevented the script from retrieving the requested resource. CGI scripts can also use this to signal that they have no information on what went wrong.
• 2 InvalidMethod: The client requested data using a method not supported by this protocol.
• 3 InvalidURL: The request URL could not be interpreted as a valid URL for this format.
• 4 FileNotFound: No file was found at the requested address, so the request is meaningless. Note: this should only be used by protocols that do not rely on a client-server architecture, e.g. local file access, local databases, or peer-to-peer file retrieval mechanisms. A server responding with “no file found” is NOT a connection error, and is better represented as a response with a 404 status code.
• 5 ConnectionRefused: The server refused to establish a connection.
• 6 ProxyRefusedToConnect: The proxy refused to establish a connection.
• 7 FailedToResolveHost: The hostname could not be resolved.
• 8 FailedToResolveProxy: The proxy could not be resolved.
• 9 ProxyAuthFail: The proxy refused the provided username/password.
• 10 InvalidResponse: The server’s response deviates from the specification so badly that it cannot be meaningfully processed.
• 11 ProxyInvalidResponse: The proxy’s response deviates from the specification so badly that it cannot be meaningfully processed.

Environment variables

Chawan sets the following environment variables:

• SERVER_SOFTWARE="Chawan"
• SERVER_PROTOCOL="HTTP/1.0"
• SERVER_NAME="localhost"
• SERVER_PORT="80"
• REMOTE_HOST="localhost"
• REMOTE_ADDR="127.0.0.1"
• GATEWAY_INTERFACE="CGI/1.1"
• SCRIPT_NAME="/cgi-bin/script-name" if called with a relative path, and "/path/to/script/script-name" if called with an absolute path.
• SCRIPT_FILENAME="/path/to/script/script-name"
• QUERY_STRING= the query string (i.e. URL.search). This variable is percent-encoded.
• PATH_INFO= everything after the script’s path name, e.g. for cgi-bin:script-name/abcd/efgh "/abcd/efgh". This variable is NOT percent-encoded.
• REQUEST_URI="$SCRIPT_NAME/$PATH_INFO?$QUERY_STRING
• REQUEST_METHOD= HTTP method used for making the request, e.g. GET or POST
• REQUEST_HEADERS= A newline-separated list of all headers for this request.
• CHA_LIBEXEC_DIR= The libexec directory Chawan was configured to use at compile time. See the tools section below for details on why this is useful.
• CONTENT_TYPE= for POST requests, the Content-Type header. Not set for other request types (e.g. GET).
• CONTENT_LENGTH= the content length, if $CONTENT_TYPE has been set.
• ALL_PROXY= if a proxy has been set, the proxy URL. WARNING: for security reasons, this must be respected when making external connections. If a CGI script does not support proxies, it must never make any external connections when the ALL_PROXY variable is set, but rather return an error message.
• HTTP_COOKIE= if set, the Cookie header.
• HTTP_REFERER= if set, the Referer header.
• CHA_TMP_DIR= directory used for storing temporary files.
• CHA_DIR= location of the config file.

For requests originating from a urimethodmap rewrite, Chawan will also set the parsed URL’s parts as environment variables. Use of these is highly encouraged, to avoid exploits originating from double-parsing of URLs.

If example://username:password@example.org:1234/path/name.html?example is the original URL, then:

• MAPPED_URI_SCHEME= the scheme of the original URL, in this case example.
• MAPPED_URI_USERNAME= the username part, in this case username. If no username was specified, the variable is set to the empty string.
• MAPPED_URI_PASSWORD= the password part, in this case password. If no password was specified, the variable is set to the empty string.
• MAPPED_URI_HOST= the host part, in this case host.org If no host was specified, the variable is set to the empty string. (An example of a URL with no host: about:blank, here blank is the path name.)
• MAPPED_URI_PORT= the port, in this case 1234. If no port was specified, the variable is set to the empty string. (In this case, the CGI script is expected to use the default port for the scheme, if any.)
• MAPPED_URI_PATH= the path name, in this case /path/name.html?example. If no path was specified, the variable is set to the empty string. The path name is percent-encoded.
• MAPPED_URI_QUERY= the query string, in this case example. Unlike in JavaScript, no question mark is prepended to the string. The query string is percent-encoded as well.

The fragment part is omitted intentionally.

Request body

If the request body is not empty, it is streamed into the program through the standard input.

Note that this may be both an application/x-www-form-urlencoded or a multipart/form-data request; CONTENT_TYPE stores information about the request type, and in case of a multipart request, the boundary as well.

Tools

Chawan provides certain helper binaries that may be useful for CGI scripts. These can be portably accessed by executing "$CHA_LIBEXEC_DIR"/[program].

Currently, the following tools are available:

• urldec: percent-decode strings passed on standard input.
• urlenc: percent-encode strings passed on standard input, taking a percent-encode set as the first parameter.

Troubleshooting

Note that standard error is redirected to the browser console (by default, M-cM-c). This makes it easy to debug a misbehaving CGI script, but may also slow down the browser in case of excessive logging. If this is not the desired behavior, wrap your script into a shell script that redirects stderr to /dev/null.

My script is returning a “Failed to execute script” error message.

This means the execl call to the script failed. Make sure that your CGI script’s executable bit is set, i.e. run chmod +x /path/to/cgi/script.

My script is returning an “invalid CGI path” error message.

Make sure that you did not include leading slashes. Reminder: cgi-bin://script-name does not work, use cgi-bin:script-name.

My script is returning a “CGI file not found” error message.

Double check that your CGI script is in the correct location. Also, make sure that you are not accidentally calling the script with an absolute path via cgi-bin:/script-name (instead of the correct cgi-bin:script-name).

It is also possible that external.cgi-dir is not really set to the directory your script is in. Note that by default, this depends on the binary’s path, so e.g. if your binary is in ~/src/chawan/target/release/bin/cha, but you put your CGI script to /usr/local/libexec/chawan/cgi-bin, then it will not work.

My script is returning a “failed to set up CGI script” error message.

This means that either pipe or fork failed. Maybe you are running out of memory?

See also

cha(1) cha-urimethodmap(5)