GSP
Quick Navigator
Search Site

Unix VPS
A - Starter
B - Basic
C - Preferred
D - Commercial
MPS - Dedicated
Previous VPSs
* Sign Up! *

Support
Contact Us
Online Help
Handbooks
Domain Status
Man Pages

FAQ
Virtual Servers
Pricing
Billing
Technical

Network
Facilities
Connectivity
Topology Map

Miscellaneous
Server Agreement
Year 2038
Credits
 

USA Flag

 

 

Man Pages
LIEBERT-ESP2(8) NUT Manual LIEBERT-ESP2(8)

liebert-esp2 - Driver for Liebert UPS, using the ESP-II serial protocol

liebert-esp2 -h

liebert-esp2 -a UPS_NAME [OPTIONS]


Note

This man page only documents the hardware-specific features of the liebert-esp2 driver. For information about the core driver, see nutupsdrv(8).

Be aware that an RS-232 cable with ONLY the RX, TX and ground pin must be used when interfacing with GXT2 series UPS units (and possibly others), since the handshaking lines are used for purposes other than RS-232 flow control.

Use of a standard RS-232 cable with full handshaking may result in undesired operation and/or shutdown. It is therefore advisable to confirm the proper cable/wiring with the diagram provided in the manual with your UPS.

Tested to work on the following units:

•Liebert GXT2-6000RT208

This is an experimental driver. You have been warned.

This driver currently does not support modification of configuration parameters, such as the low battery warning time and automatic restart policy.

This driver supports the following optional settings in ups.conf(5):

baudrate=num

Set the speed of the serial connection — 1200, 2400 (default), 4800, 9600 or 19200.

•Richard Gregory <R.Gregory at liverpool.ac.uk>

•Arjen de Korte <adkorte-guest at alioth.debian.org>

•Nash Kaminski <nashkaminski at kaminski.io>

nutupsdrv(8)

The NUT (Network UPS Tools) home page: https://www.networkupstools.org/

07/18/2025 Network UPS Tools 2.8.3.
Search for    or go to Top of page |  Section 8 |  Main Index

Powered by GSP Visit the GSP FreeBSD Man Page Interface.
Output converted with ManDoc.