NAME

tttrace — trace ToolTalk calls and messages

SYNOPSIS

tttrace [-0FCa] [-ooutfile] [-Ssession | command ]

tttrace [-escript | -fscriptfile ] [-Ssession | command ]

DESCRIPTION

tttrace traces message traffic through the server for the indicated ToolTalk session, or runs command with ToolTalk client tracing turned on. If neither session nor command is given, the default session is traced. By default, tracing terminates when tttrace exits.

Tracing of ToolTalk functions looks like this: [pid] function_name(params) = return_value (Tt_status)

With the -a option, message attributes are printed after a one-line summary of the message: Tt_state Tt_paradigm Tt_class (Tt_disposition in Tt_scope): status == Tt_status

State changes are indicated by: old_state => new_state.

Deliveries are indicated by: Tt_message => procid &<recipient_procid>

When dispatching is being traced, the reason for each dispatch is one of:

tt_message_send()

tt_message_reject()

tt_message_fail()

tt_message_reply()

tt_session_join()

tt_file_join()

tt_message_reply (): A client called the indicated function.
tt_message_send_on_exit (): ttsession is dispatching on_exit messages for a client that disconnected before calling tt_close().
tt_message_accept (): ttsession is dispatching messages that had been blocked while a ptype was being started. The started client has now called either tt_message_accept() or tt_message_reply() to indicate that the ptype should be unblocked.
TT_ERR_PTYPE_START: A ptype instance was started to receive the message, but the start command exited before it connected to ttsession.
TT_ERR_PROCID: ttsession lost its connection to the client that was working on this request.
ttsession -> ttsession: Another session wants this session to find recipients for the message.
ttsession &<- ttsession: Another session wants to update (e.g. fail) a message originating in this session.
: When dispatching is being traced, matching is indicated by one of Tt_message && Tt_pattern { Tt_message && ptype ptid { Tt_message && otype otid {
: The pattern or signature is printed, followed by } == match_score; [/* mismatch_reason */]

OPTIONS

-0: Turn off message tracing in session, or run command without message tracing (i.e., with only call tracing).
-F: Follow all children forked by command or subsequently started in session by ttsession. Normally, only the indicated command or ttsession instance is traced. When -F is specified, the process id is included with each line of trace output to indicate which process generated it.
-C: Do not trace client calls into the ToolTalk API. Default is to trace them.
-a: Print all attributes, arguments, and context slots of traced messages. The default is to use only a single line when printing a message on the trace output.
-e script: Take script as a tttrace setting. See tttracefile(4).
-f scriptfile: File to read tttrace settings from. See tttracefile(4). -f - causes tttrace to read standard input until EOF, which may prevent command from using standard input.
-o outfile: File to be used for the trace output.
: For session tracing, output goes to standard output of tttrace.
: For client tracing, output goes by default to standard error of tttrace. For client tracing, -o - causes trace output to go to standard output of tttrace.
: If the server for session is running on a remote host and either

•: outfile is not mounted on that host, or
•: the -o option is omitted,

: then tttrace will fail.
-S session: Session to trace. Defaults to the default session -- the session that tt_open() would contact.
command: The ToolTalk client command to invoke and trace.

EXAMPLES

Here we trace a client that registers a pattern and sends a notice that matches it:

% tttrace -a myclientprogram
tt_open() = 0x51708=="7.jOHHM X 129.144.153.55 0" (TT_OK)
tt_fd() = 11 (TT_OK)
tt_pattern_create() = 0x50318 (TT_OK)
tt_pattern_category_set(0x50318, TT_OBSERVE) = 0 (TT_OK)
tt_pattern_scope_add(0x50318, TT_SESSION) = 0 (TT_OK)
tt_pattern_op_add(0x50318, 0x2f308=="Hello World") = 0 (TT_OK)
tt_default_session() = 0x519e0=="X 129.144.153.55 0" (TT_OK)
tt_pattern_session_add(0x50318, 0x519e0=="X 129.144.153.55 0") = 0 (TT_OK)
tt_pattern_register(0x50318) = 0 (TT_OK)
tt_message_create() = 0x51af0 (TT_OK)
tt_message_class_set(0x51af0, TT_NOTICE) = 0 (TT_OK)
tt_message_address_set(0x51af0, TT_PROCEDURE) = 0 (TT_OK)
tt_message_scope_set(0x51af0, TT_SESSION) = 0 (TT_OK)
tt_message_op_set(0x51af0, 0x2f308=="Hello World") = 0 (TT_OK)
tt_message_send(0x51af0)        ...


        TT_CREATED => TT_SENT:


                TT_SENT TT_PROCEDURE TT_NOTICE (TT_DISCARD in TT_SESSION): 0 == TT_OK


                id:             0 7.jOHHM X 129.144.153.55 0


                op:             Hello World


                session:        X 129.144.153.55 0


                sender:         7.jOHHM X 129.144.153.55 0
= 0 (TT_OK)
tt_message_receive()    ...


        Tt_message => procid &<7.jOHHM X 129.144.153.55 0>


        TT_SENT TT_PROCEDURE TT_NOTICE (TT_DISCARD in TT_SESSION): 0 == TT_OK


        id:             0 7.jOHHM X 129.144.153.55 0


        op:             Hello World


        session:        X 129.144.153.55 0


        sender:         7.jOHHM X 129.144.153.55 0


        pattern:        0:7.jOHHM X 129.144.153.55 0
= 0x51af0 (TT_OK)

ttsession's view of this traffic can be seen as follows. Note that the first message traced will almost always be ttsession's reply to the request sent it by tttrace.

% tttrace -a
tt_message_reply:


        TT_SENT => TT_HANDLED:


                TT_HANDLED TT_PROCEDURE TT_REQUEST (TT_DISCARD in TT_SESSION): 0 == TT_OK


                id:             0 2.jOHHM X 129.144.153.55 0


                op:             Session_Trace


                args:


                        TT_IN string: "> /tmp/traceAAAa002oL; version 1; states"[...]


                session:        X 129.144.153.55 0


                sender:         2.jOHHM X 129.144.153.55 0


                pattern:        0:X 129.144.153.55 0


                handler:        0.jOHHM X 129.144.153.55 0


                Tt_message => procid &<2.jOHHM X 129.144.153.55 0>
tt_message_send:


        TT_CREATED TT_PROCEDURE TT_NOTICE (TT_DISCARD in TT_SESSION): 0 == TT_OK


        id:             0 7.jOHHM X 129.144.153.55 0


        op:             Hello World


        session:        X 129.144.153.55 0


        sender:         7.jOHHM X 129.144.153.55 0


        TT_CREATED => TT_SENT:


                TT_SENT TT_PROCEDURE TT_NOTICE (TT_DISCARD in TT_SESSION): 0 == TT_OK


                id:             0 7.jOHHM X 129.144.153.55 0


                op:             Hello World


                session:        X 129.144.153.55 0


                sender:         7.jOHHM X 129.144.153.55 0


        Tt_message && Tt_pattern {


                id:             0:7.jOHHM X 129.144.153.55 0


                category:       TT_OBSERVE


                scopes:         TT_SESSION


                sessions:       X 129.144.153.55 0


                ops:            Hello World


        } == 3;


        Tt_message => procid &<7.jOHHM X 129.144.153.55 0>

To trace message flow in a specific, non-default session,

% tttrace -S "01 15303 1342177284 1 0 13691 129.144.153.55 2"

ENVIRONMENT

tttrace is implemented purely as a ToolTalk client, using the message interface to ttsession and the following environmental hook into libtt.

TT_TRACE_SCRIPT: If set, tells libtt to turn on client-side tracing as specified in the trace script. If the first character of of the value is '.' or '/', the value is taken to be the pathname of file containing the trace script to use. Otherwise, the value is taken to be an inline trace script.

FILES

$TMPDIR/tttrace.nnn: A named pipe (see mkfifo(3C)) in $TMPDIR (see tempnam(3S)) from which trace output for session is read when the -o option is omitted.

WARNINGS

Since (with the -F option) tracing can follow clients to remote hosts if the environment is properly propagated, it is possible for different processes in the same trace output to be labeled with the same process id.

SEE

ttsession(1), tttracefile(4), the Session_Trace() ToolTalk request

DIAGNOSTICS

If command is run, then tttrace will exit with the exit status of command. Otherwise, exit codes are as follows:

0: Normal termination. Any session tracing turned on by this invocation of tttrace has now been turned off.
1: Usage. tttrace was given invalid command line options.
2: Failure. tttrace encountered an error while trying to do its job. An error message has been emitted on standard error.
3: Runaway session tracing. tttrace could not terminate tracing in session before exiting.
4: Remote session. ttsession is remote, and outfile (if given) is not visible there. Choose a visible file, or run tttrace on that remote host.
5: Old session. The ttsession for session does not support the Session_Trace() request. Run kill -USR1 on it to turn on old-style tracing.

NOTES

For security purposes, client-side tracing is disabled inside a client when its effective uid or gid is different from its real uid or gid and the real uid is not the super-user.